Range of system 2000 of flange adaptors and connectors with ductile iron bodies (Blue Epoxy Coated) incorporating EPDM seals. For use with PE pipe manufactured to En 12201 & PVC Pipe manufactured to DIN 8062. Maximum working pressure: 16.0Bar Cold water use only.

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

241002051

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models below

Marking:

Hawle logo and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

System 2000 Range: 0400 DN50 – DN600 0430 DN63 – DN355 5045 DN80 & DN100 8075 DN63 – DN315 8515 DN63 – DN225 8525 DN63 – DN225 8535 DN63 – DN315 8545 DN63 – DN315 8555 DN63 – DN315 8557 DN63 – DN315

Product Images

Approval Holder:

E-Hawle Armaturenwerke GmbH

Company Name

E-Hawle Armaturenwerke GmbH

Address

Wagrainer Stabe 13 AT 4840 Vocklabruck

View All Listings by this Company

Range of water meters with either cast iron (blue epoxy coated) or stainless-steel bodies, transducers and EPDM rubber O-rings. Maximum working pressure 25.0 Bar. Maximum operating temperature 50.0°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Flanged - DN40 to DN100.

Marking:

Weihai Ploumeter Co., Ltd. Model number and product information on data plate.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

SC7

Product Images

Approval Holder:

Weihai Ploumeter Co., Ltd.

Company Name

Weihai Ploumeter Co., Ltd.

Address

No. 576 South of Torch Road, Huancui District, Weihai, Shandong Province

Country

China

View All Listings by this Company

Range of water meters with either cast iron (blue epoxy coated) or stainless-steel bodies, transducers and EPDM rubber O-rings. Maximum working pressure 25.0 Bar. Maximum operating temperature 50.0°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Flanged - DN40 to DN100.

Marking:

Helvatron, Model number and product information on data plate.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

HELVATRON H20 FLANGE

Approval Holder:

Helvatron AG

Company Name

Helvatron AG

Address

JOCHLERWEG 2 CH-6340 BAAR SWITZERLAND

View All Listings by this Company

Jet range of water meters with brass blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure16.0 bar. Maximum operating temperature 85°C.

Section:

1505 Water Meters

Size:

see model

Marking:

JET, WRAS and other technical info on dial.

Installation Requirements:

R001 R120

Expiry date:

31/12/2026

Model:

¾” BSP (M) 172033 JET NON PULSED COLD WATER METER 15 FTG 172035 JET PULSED COLD WATER METER 15 FTG 172041 JET PULSED HOT WATER METER 15 FTG 1” BSP (M) 172034 JET NON PULSED COLD WATER METER 20 FTG 172036 JET PULSED COLD WATER METER 20 FTG 172042 JET PULSED HOT WATER METER 20 FTG 1 ¼” BSP (M) 172037 JET PULSED COLD WATER METER 25 FTG 172043 JET PULSED HOT WATER METER 20 FTG 1 ½” BSP (M) 171038 JET PULSED COLD WATER METER 32 FTG 172044 JET PULSED COLD WATER METER 20 FTG 2” BSP (M) 172039 JET PULSED COLD WATER METER 32 FTG 172045 JET PULSED COLD WATER METER 20 FTG 2 ½” BSP (M) 172040 JET PULSED COLD WATER METER 32 FTG 172046 JET PULSED COLD WATER METER 20 FTG

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Water hammer arrestor with brass body and EPDM ‘O’ ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

CIM & Made in Italy on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

CIM 1450 – Water Hammer shock absorber

Approval Holder:

Cimberio S.p.A

Company Name

Cimberio S.p.A

Address

Via Torchio, 57 San Maurizio d’Opaglio

Postcode

28017

Country

Italy

Phone

+39.0322.923001

General Email

tguidetti@cimberio.it

View All Listings by this Company