'Interline 925GF (White)'. Site applied, white coloured, two-component, solvent free epoxy coating. Mix part A (white liquid) with part B (off-white liquid) in a volume ratio of 3:1 and apply as per manufacturer's instructions '2253' dated 29/11/2011. Cure for 7 days@25°C. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2202507

Expiry date:

28/02/2027

Approval Holder:

Akzo Nobel Saudi Arabia Ltd.

Company Name

Akzo Nobel Saudi Arabia Ltd.

Country

Saudi Arabia

View All Listings by this Company

'Interline 925 White'. Site applied, two-component, white coloured epoxy coating. Mix part A (off-white white coloured liquid) and part B (off-white coloured liquid) in a volume ratio of 3:1 and apply as per manufacturer's instructions ref. '2252', issue date 17/12/2020. Cure for 7 days@25°C. Between January 2022 and August 2022, the coating was for use with water up to 23°C. Between September 2022 and January 2027, the coating is for use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2201522

Expiry date:

31/01/2027

Approval Holder:

Akzo Nobel Saudi Arabia Ltd.

Company Name

Akzo Nobel Saudi Arabia Ltd.

Country

Saudi Arabia

View All Listings by this Company

'AXIL-76/T-MD'. White coloured (translucent), extruded silicone rubber hose. Shore hardness 80. Tested in-radius size between 0.75mm & 2.1mm. For use with water up to 85°C.

Section:

5140 Hoses & Tubing

Expiry date:

31/12/2026

Approval Holder:

POSA S.p.A.

Company Name

POSA S.p.A.

Address

Via S.Francesco d'Assisi 330, 20861 Brugherio (MB)

Country

Italy

View All Listings by this Company

`BK Standard Lubricant`. Clear (colourless), translucent, soap based lubricant paste. For use with water up to 60°C.

Section:

5160 Lubricants

Expiry date:

31/03/2027

Approval Holder:

Thomas Grozier and Son Pty. Ltd.

Company Name

Thomas Grozier and Son Pty. Ltd.

Address

2/8 Prince William Drive Severn Hills New South Wales 2147

Country

Australia

General Email

sales@thomasgrozier.com

View All Listings by this Company

'PlumbSil & PlumbSil HT'. Colourless silicone greases. Apply as per manufacturer's instructions dated 18th Jan 2022. For use with water up to 65°C.

Section:

5160 Lubricants

Expiry date:

31/01/2027

Approval Holder:

E. Martin & Co. Silicones

Company Name

E. Martin & Co. Silicones

Address

77 West Vale, Neston, Cheshire

Postcode

CH64 0SF

View All Listings by this Company