Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. Maximum operating temperature 35°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250702730

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

U3 & U5 : 1” BSP (F) inlet x 1” BSP (F) outlet. U7 : 1¼” BSP (F) inlet x 1” BSP (F) outlet. U9 : 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U18 : 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Felsom, Exa Pumps Srl, model and other technical info on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/07/2030

Proviso:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Model:

ULTRA range: U 3 – XX/Y, U 5 – XX/Y, U 7 – XX/Y, U 9 – XX/Y, U 3 – XX/Y T, U 5 – XX/Y T, U 7 – XX/Y T, U 9 – XX/Y T, U 18 – XX/Y T. (U) 3/5/7/9/18 = nominal flow rate in m³/h. XX = nominal power HPx100. U3/T (single or three phase): 50-150. U5/T (single or three phase): 70-200. U7 (single phase): 100-300. U7T (three phase): 100-350. U9/T (single or three phase): 100-250. U18 (three phase only): 180-400. Y = Number of impellers. U3, U5 (single or three phase): 2-7 stages. U7 (single phase): 2-6 stages. U7 (three phase): 2-7 stages. U9 (single or three phase): 2-5 stages. U18 (three phase only): 2-4 stages. Suffix T = 3 phase.

Product Images

Approval Holder:

Exa Pumps SrL

Company Name

Exa Pumps SrL

Address

Via Tre Confini, 23 22010 Gera Lario CO

Country

Italy

Phone

0039 0344 910054

General Email

infor@exapumps.com

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002725

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

U 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. U 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Felsom, Exa Pumps Srl, model and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

ULTRA S range: U X(S) - XX/Y (T) Where: U = pump type (ULTRA), X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. U 3S models: U 3S-50/2; U 3S-70/3; U 3S-90/4; U 3S-100/5; U 3S-120/6; U 3S-150/7. U 5S models: U 5S-70/2; U 5S-80/3; U 5S-120/4; U 5S-150/5; U 5S-180/6; U 5S-200/7. U 7S models: U 7S-100/2; U 7S-120/3; U 7S-180/4; U 7S-250/5; U 7S-300/6. U 9S models: U 9S-100/2; U 9S-150/3; U 9S-200/4; U 9S-250/5. U 3S models: U 3S-50/2 T; U 3S-70/3 T; U 3S-90/4 T; U 3S-100/5 T; U 3S-120/6 T; U 3S-150/7 T. U 5S models: U 5S-70/2 T; U 5S-80/3 T; U 5S-120/4 T; U 5S-150/5 T; U 5S-180/6 T; U 5S-200/7 T. U 7S models: U 7S-100/2 T; U 7S-120/3 T; U 7S-180/4 T; U 7S-250/5 T; U 7S-300/6 T; U 7S-350/7 T. U 9S models: U 9S-100/2 T; U 9S-150/3 T; U 9S-200/4 T; U 9S-250/5 T. U 18S models: U 18S-180/2 T; U 18S-250/3 T; U 18S-400/4 T.

Product Images

Approval Holder:

Exa Pumps SrL

Company Name

Exa Pumps SrL

Address

Via Tre Confini, 23 22010 Gera Lario CO

Country

Italy

Phone

0039 0344 910054

General Email

infor@exapumps.com

View All Listings by this Company

Range of electric water pumps, with stainless steel bodies, shaft and either stainless steel or plastic impellors. Maximum working pressure 8.5 Bar. Maximum operating temperature: See models.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251202716

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (F)

Marking:

Ultra models = Pentax logo, model and technical data on data plate on body Plus models = Foras logo, model and technical data on data plate on body

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

U 3A-90/4; U 3A-100/5 - 35 °C U 5A-120/4; U 5A-150/5 - 35 °C U 3A-90/4 T; U 3A-100/5 T - 35 °C U 5A-120/4 T; U 5A-150/5 T - 35 °C P 3A-90/4; P 3A-100/5 - 35 °C P 5A-120/4; P 5A-150/5 - 35 °C P 3A-90/4 T; P 3A-100/5 T - 35 °C P 5A-120/4 T; P 5A-150/5 T - 35 °C U 3SA-90/4; U 3SA-100/5 - 80 °C U 5SA-120/4; U 5SA-150/5 - 80 °C U 3SA-90/4 T; U 3SA-100/5 T - 80 °C U 5SA-120/4 T; U 5SA-150/5 T - 80 °C P 3SA-90/4; P 3SA-100/5 - 80 °C P 5SA-120/4; P 5SA-150/5 - 80 °C P 3SA-90/4 T; P 3SA-100/5 T - 80 °C P 5SA-120/4 T; P 5SA-150/5 T - 80 °C

Approval Holder:

PENTAX INDUSTRIES SpA

Company Name

PENTAX INDUSTRIES SpA

Address

Viale dell’Industria 1 Veronella

Postcode

37040

Country

Italy

Phone

+39 0442 489567

General Email

g.cengia@pentax-pumps.it

View All Listings by this Company

Range of self-priming electric booster pumps with plastic bodies incorporating plastic impellers with variable speed settings, and a non-return return valve (not suitable for backflow protection). Maximum working pressure 4.5 Bar Maximum operating temperature 50.0°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251202719

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Available in both ¾” BSP (M) or ¾” NPT (M)

Marking:

DAB company logo on pump body

Installation Requirements:

R001 R008 R415

Expiry date:

31/12/2030

Model:

60220687 EsyBox Pop (Pressurisation booster system) 60217710 ESYDOCK POP (Base for an easy assembling of the pump Esybox Pop on the wall, provided with BSP and NPT threaded connections.)

Approval Holder:

DAB PUMPS SPA

Company Name

DAB PUMPS SPA

Address

Via Marco Polo 14 Mestrino (PD)

Postcode

35035

Country

Italy

General Email

certifications@dwtgroup.com

View All Listings by this Company

FVC & FVS Ranges of stainless steel or cast iron (with electrolytic coating) bodied, multistage centrifugal pumps with stainless steel impellers. Maximum working pressure: Ranges from 16.0 bar to 30.0 bar (see models). Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251108705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Zirantec logo, model and product information on data plate fixed on pump bracket. Flow arrow on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2030

Model:

FVS 01 Stainless steel Body – DIN Flange (2 to 40 stages) DN25 (PN25) & Oval Flange (2 to 26 stages) G1 (F) (PN16). FVS 03 Stainless steel Body – DIN Flange (2 to 31 stages) DN25 (PN25) & Oval Flange (2 to 20 stages) G1 (F) (PN16). FVS 05 Stainless steel Body – DIN Flange (2 to 33 stages) DN32 (PN25) & Oval Flange (2 to 20 stages) G1 1/4 (F) (PN16). FVS 10 Stainless steel Body – DIN Flange (1 to 22 stages) DN40 (PN25) & Oval Flange (2 to 14 stages) G1 1/2 (F) (PN16). FVS 15 Stainless steel Body – DIN Flange (1 to 18 stages) DN50 (PN25), FVS 20 Stainless steel Body – DIN Flange (1 to 17 stages) DN50 (PN25), FVS 32 Stainless steel Body – DIN Flange (1 to 16 stages) DN65 (PN30), FVS 44 Stainless steel Body – DIN Flange (1 to 13 stages) DN80 (PN30), FVS 66 Stainless steel Body – DIN Flange (1 to 8 stages) DN100 (PN25), FVC 01 Cast Iron Body – DIN Flange (2 to 40 stages) DN25 (PN25) & Oval Flange (2 to 26 stages) G1 (F) (PN16). FVC 03 Cast Iron Body – DIN Flange (2 to 31 stages) DN25 (PN25) & Oval Flange (2 to 20 stages) G1 (F) (PN16). FVC 05 Cast Iron Body – DIN Flange (2 to 33 stages) DN32 (PN25) & Oval Flange (2 to 20 stages) G1 1/4 (F) (PN16). FVC 10 Cast Iron Body – DIN Flange (1 to 22 stages) DN40 (PN25) & Oval Flange (2 to 14 stages) G1 1/2 (F) (PN16). FVC 15 Cast Iron Body – DIN Flange (1 to 18 stages) DN50 (PN25), FVC 20 Cast Iron Body – DIN Flange (1 to 17 stages) DN50 (PN25), FVC 32 Cast Iron Body – DIN Flange (1 to 16 stages) DN65 (PN30), FVC 44 Cast Iron Body – DIN Flange (1 to 13 stages) DN80 (PN30), FVC 66 Cast Iron Body – DIN Flange (1 to 8 stages) DN100 (PN25),

Product Images

Approval Holder:

F.I.P.S Fabbrica Italiana Pompe Sommergibili SrL

Company Name

F.I.P.S Fabbrica Italiana Pompe Sommergibili SrL

Address

Via dell'Artigianato 16 20072 Pieve Emanuele, Milan

Country

Italy

Phone

0039 0249 708488

General Email

santosh@fips-pumps.it

View All Listings by this Company