Range of ion exchange water softeners (salt regenerated) for domestic use. Maximum working pressure 6.0 bar. Cold water use only.

Section:

2450 Water softeners

Size:

¾” BSP (M) inlet/outlet or 1” BSP (M) inlet/outlet

Marking:

Canature, model and other product info on adhesive label on rear of body.

Installation Requirements:

R001 R150 R170 R290 R415

Expiry date:

30/04/2026

Proviso:

Discharge to drain must be via a type `AA`, `AB` or `AD` air gap in accordance with EN1717.

Model:

Model CSAA-B-XXYY-Z AA denotes shape of softener external cabinet and can be replaced with ‘1H’ to ‘20H’ - From December 2024: AA can now be replaced with ‘1H’ to ‘32H’. B denotes shape of softener cover and can be replaced with ‘II’, ‘slide cover’ or ‘plus’. XX denotes diameter of resin tank between ‘08’ and ‘10’. YY denotes height of resin tank between ‘15’ and ‘35’. Z denotes control valve and is replaced with ‘BNT850SE’ or ‘null’ which represents ‘BNT850HE’ control valve. Model MN XXYY XX denotes diameter of resin tank and is replaced with ‘09’. YY denotes height of resin tank between ‘13’ and ‘35’. Duplex XXYY XX denotes diameter of resin tank and is replaced with ‘10’. YY denotes height of resin tank and is replaced with ‘17’ or ‘35’. Models added December 2024: Monarch Water LUXE, CN-07-05.

Approval Holder:

Canature Health Technology Group Co.,Ltd.

Company Name

Canature Health Technology Group Co.,Ltd.

Address

No.508 & 518, Chuanda Road, Pudong New Area, Shanghai City

Country

China

View All Listings by this Company

Range of ion exchange water softeners (salt regenerated) for domestic use. Maximum working pressure 6.0 bar. Cold water use only.

Section:

2450 Water softeners

Size:

¾” BSP (M) inlet/outlet or 1” BSP (M) inlet/outlet

Marking:

MONARCH WATER ON FRONT OF BODY MONARCH WATER COMPANY INFORMATION, MODEL & PRODUCT INFORMATION ON ADHESIVE LABEL ON REAR OF BODY

Installation Requirements:

R001 R150 R170 R290 R415

Expiry date:

30/04/2026

Proviso:

Discharge to drain must be via a type `AA`, `AB` or `AD` air gap in accordance with EN1717.

Model:

MONARCH RANGE EXCHANGE WATER SOFTENERS : Mini Aqua HE, CS100HE, PROSOFT100HE, EVER 9, Midi HE, CS150HE, PROSOFT150HE, EVER 12, Master HE, CS200HE, PROSOFT200HE, EVER 18, Matrix HE ,CS300HE, PROSOFT300HE, EVER 30, PS12 HE, PS15 HE, GS4000 HE, GS6000 HE, LPS HE, SOF3000HE & SOF6000HE

Approval Holder:

Monarch Water Ltd

Company Name

Monarch Water Ltd

Address

Fair Green Diss Norfolk

Postcode

IP22 4DG

Country

United Kingdom

Phone

01986 784759

General Email

kdelaney@monarchwater.co.uk

View All Listings by this Company

'Challenger ABS Fittings'. Light grey coloured, injection moulded ABS fittings. For use with water up to 23°C.

Section:

5020 Acrylonitrile Butadeine Styrene Copolymer (ABS)

Expiry date:

30/04/2026

Approval Holder:

Epco Limited

Company Name

Epco Limited

Address

Unit 6, Felnex Square, Cross Green Industrial Estate, Leeds

Postcode

LS9 0ST

View All Listings by this Company

'Deep High Build Liquid Bitumen Paint'. Factory applied, black coloured bitumen paint. Apply and cure as per manufacturer's instructions reference 'DI/BP/2021/011' dated April 15, 2021. For use with water up to 60°C.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

2110502

Expiry date:

31/10/2026

Approval Holder:

Deep Industries

Company Name

Deep Industries

Address

Plot Number 264, GIDC-II, Dediyasan, Mehsana - 384002, Gujurat

Country

India

View All Listings by this Company

'P658RC & CY10C washers'. P658RC is a black coloured, polyester resin impregnated carbon washer. CY10C is a dark grey coloured, phenolic resin impregnated carbon washer. For use with water up to 85°C.

Section:

5022 Carbon

Expiry date:

30/04/2026

Approval Holder:

Morgan Advanced Materials

Company Name

Morgan Advanced Materials

Address

1 Rue des Trois Cantons, 8399 Windhof

Country

Luxembourg

View All Listings by this Company