'NO MORE DAMP Tanking slurry'. Site applied, grey coloured, cementitious tanking slurry supplied in powder form. Mix powder:water in a mass ratio of 3.85:1 and apply as per manufacturer's datasheet 'issue 5 - MC0420'. Cure for 7 days and 4 hours@20°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5046 Coatings, Paints & Linings

Section Subtitle:

Site applied cistern coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2201518

Expiry date:

31/01/2027

Approval Holder:

Wykamol Group Limited

Company Name

Wykamol Group Limited

Address

Unit 3 Boran Court, Network 65 Business Park, Hapton

Postcode

BB11 5TH

Country

Burnley,

View All Listings by this Company

'Hydradry Tanking slurry'. Site applied, grey coloured, cementitious tanking slurry supplied in powder form. Mix powder:water in a mass ratio of 3.85:1 and apply as per manufacturer's datasheet 'issue 5 - MC0320'. Cure for 7 days and 4 hours@20°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5046 Coatings, Paints & Linings

Section Subtitle:

Site applied cistern coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2201519

Expiry date:

31/01/2027

Approval Holder:

Wykamol Group Limited

Company Name

Wykamol Group Limited

Address

Unit 3 Boran Court, Network 65 Business Park, Hapton

Postcode

BB11 5TH

Country

Burnley,

View All Listings by this Company

'Monomix WS'. Site applied, grey coloured cementitious waterproof mortar. Mix powder and water in a mass ratio of 7.58:1. Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5063 Concrete, Cement and Mortar

Section Subtitle:

Repair materials. High humidity of 80% to 95% is required when curing cementitious materials.

WRAS Approval Number:

2103565

Expiry date:

31/03/2026

Approval Holder:

Flexcrete Technologies Ltd.

Company Name

Flexcrete Technologies Ltd.

Address

Tomlinson Road, Leyland, Lancashire

Postcode

PR25 2DY

Phone

0845 2607005

General Email

Info@flexcrete.com

View All Listings by this Company

'AXIL-76/T-MD'. White coloured (translucent), extruded silicone rubber hose. Shore hardness 80. Tested in-radius size between 0.75mm & 2.1mm. For use with water up to 85°C.

Section:

5140 Hoses & Tubing

Expiry date:

31/12/2026

Approval Holder:

POSA S.p.A.

Company Name

POSA S.p.A.

Address

Via S.Francesco d'Assisi 330, 20861 Brugherio (MB)

Country

Italy

View All Listings by this Company

'PlumbSil & PlumbSil HT'. Colourless silicone greases. Apply as per manufacturer's instructions dated 18th Jan 2022. For use with water up to 65°C.

Section:

5160 Lubricants

Expiry date:

31/01/2027

Approval Holder:

E. Martin & Co. Silicones

Company Name

E. Martin & Co. Silicones

Address

77 West Vale, Neston, Cheshire

Postcode

CH64 0SF

View All Listings by this Company