Directory Search Results

Print List

#2010504

'SIL60 RED 'O' rings and seals'. Red coloured, injection moulded silicone rubber 'O' rings and seals. Shore hardness 60. The 'O' rings have a tested in-radius size of 1.77mm. The seals have a tested in-radius size of 0.90mm. For use with water up to 85°C.

Section:
5410 Rubbers
Section Subtitle:
Silicone - components.
WRAS Approval Number:
2010504
Expiry date:
31/10/2025

Approval Holder:
Superior Seals Ltd.
Company Name
Superior Seals Ltd.
Address
Nimrod Way, Ferndown Industrial Estate, Ferndown, Dorset
Postcode
BH21 7SH
Country
UK
Phone
01202 854 300
General Email
sales@superiorltd.com

View All Listings by this Company

Print This Approval


#2012501

'Griffon WDF-05'. Site applied, blue coloured solvent cement. Apply as per manufacturer's instructions '6311380 20200708'. Cure for 30 minutes@12°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5560 Solvent Cements
Expiry date:
31/12/2025

Approval Holder:
Bison International
Company Name
Bison International
Address
PO Box 160 NL 4460 A D Goes Netherlands

View All Listings by this Company

Print This Approval


#2009312

Range of wall hung WC pan with bidet seat where the flow is controlled via a solenoid valve and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Cold supply only. Maximum working pressure 10 bar.

Section:
0278 Bidets and associated fittings
Size:
3/8” BSP (M)
Marking:
Geberit on cover and remote. Manufacturer, model, serial no and other technical information under cover.
Installation Requirements:
R001 R415 R574
Expiry date:
30/09/2025
Model:
Geberit Aqua Clean Sela 146.220.21.1 (gloss chrome) & 146.220.11.1 (white). Models added July 2023: 146.220.JT.1 (white matt), 146.250.21.1 (square gloss chrome) & 146.250.01.1 (square white).
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2009325

Range of wall hung WC pans with bidet seat where the flow is controlled via a solenoid valve and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The unit has a heated seat and dryer function. Cold supply only Maximum working pressure 10.0 bar.

Section:
0278 Bidets and associated fittings
Size:
3/8” BSP (M)
Marking:
Geberit on under side of seat. Geberit, model, serial No and other technical information on back of panel.
Installation Requirements:
R001 R415 R574
Expiry date:
30/09/2025
Model:
Geberit AquaClean Tuma Classic Geberit AquaClean Tuma Comfort
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2111704

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (either stainless steel or brass bodies in a variety of finishes). Flow is controlled via two solenoid valves (housed in a control box) activated via an infra-red sensor, the inlets to the control box incorporate stainless steel strainers. The temperature is controlled independently via a ceramic cartridge with a dome type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2111704
Size:
Control box: ⅜” BSP (M). Tap: Braided stainless steel braided, PEX lined hoses with 10mm spigot end connections
Marking:
VOLA on operating member
Installation Requirements:
R001 R006 R007 R010
Expiry date:
30/11/2026
Model:
VOLA HV1E-XX Stainless steel. Where XX denotes the surface finish: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold, 71 = Brushed Dark Copper. VOLA HV1E-XX Brass. Where XX denotes the surface finish: 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold.

Approval Holder:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 32 of 2032

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.