Pumps

Section Code 1610 : Wholesome water use.

Back To Directory Sections

#2104307

Range of black plastic bodied multistage, self or manually primed, high pressure centrifugal pumps with a stainless steel outer casing, plastic impellors, EPDM seals and ‘O’-rings. Maximum working pressure 8.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2104307
Size:
1” BSP (M) x 1” BSP (M)
Marking:
WILO, manufacturers address, TYP, art no, date of manufacture (YYwWW, e.g. 20w51 - 2020 week 51) and other technical information on adhesive label on body.
Installation Requirements:
R001 R415
Expiry date:
30/04/2026
Model:
HiMulti 3- range: Example code: HiMulti 3-23 P/1/5/230/S1 Where: HiMulti 3 = series name. 2 = Nominal flow (m3/h) (other possible value is 4). 3 = Number of Impellers (other possible values are 4 and 5). P = Self Priming version (other possible variant without P non self-priming variant) 1 single phase. 5 = Pump frequency - 50hz. 230 = Pump voltage - 230V S1 = Mechanical seal version.
Product Images

Approval Holder:
WILO France SAS
Company Name
WILO France SAS
Address

View All Listings by this Company
Manufacturer:
WILO France SAS
Company Name
WILO France SAS
Address

View All Listings by this Company

Print This Approval


#2011354

MBC 12-22WM & MBC 12-28WM models are wall mounted mains supply booster sets. They are supplied with two spherical isolation valves, a spherical bypass valve and two single check valve assemblies (suitable for backflow protection against Fluid Category 2). The check valve assemblies are to be installed in accordance with the manufacturers instructions, one upstream of the pump inlet and one after the bypass valve. The booster pump incorporates a plastic strainer on the inlet and a plastic flow regulator on the outlet and is housed within a wall mounted cabinet. MJ3 VM & MJ3 HM models are mains supply booster sets intended to be mounted on an expansion vessel (not supplied as part of the approval). They comprise of a pump, a suction and discharge manifold with bypass arrangement, and a spherical bypass valve which incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The booster pump incorporates a plastic strainer on the inlet and a plastic flow regulator on the outlet. Maximum working pressure 6.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2011354
Note:
All interconnecting pipework is to be supplied by the installer.
Size:
MBC 12-22WM & 12-28WM models: Quadruple layered flexible hoses consisting of a black coloured TPE inner layer, PVC middle layer, braided PE third layer and white coloured PVC outer layer with 15mm pushfit end connections. MJ3 VM & HM models: Stainless steel braided EPDM lined flexible hose assemblies with 22mm pushfit end connections.
Marking:
Stuart Turner, Stuart Turner logo, mains boost, model no., pressure, temperature and other technical information on adhesive label on pump. Stuart Turner on pump body.
Installation Requirements:
R001
Expiry date:
30/11/2025
Model:
Part code 44725: Mainboost charger MBC 12-22WM. Part code 44726: Mainboost charger MBC 12-28WM. Where: MBC = Range name: Mainsboost Charger. 12 = maximum pumped flow in l/min. 22 or 28 = 22mm or 28mm sizes bypass fittings supplied. WM = wall mounted. Part code 41712: Mainboost charger MJ3 VM. Part code 41729: Mainboost charger MJ3 HM. Where: MJ = MJ pump, version 3. VM = vertical vessel mounted. HM = horizontal vessel mounted.
Product Images

Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company
Manufacturer:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Print This Approval


#2106805

Range of inline circulating pumps with bronze bodies, plastic impeller and EPDM rubber seals. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2106805
Size:
Please refer to model.
Marking:
WILO, MODEL, PN, flow arrow, serial number, date of manufacture (YYWW) and other technical information on body.
Installation Requirements:
R001
Expiry date:
30/06/2026
Model:
SB 30 - 1½” BSP (M). SB5 - 1” BSP (M). SB 30 G - 1¼” BSP (M). SB 60 - 1½” BSP (M).
Product Images

Approval Holder:
Wilo
Company Name
Wilo
Address
80 BD de I'industrie, BP0527 - 53005 Laval, Cedex
Country
France

View All Listings by this Company

Print This Approval


#2104310

Range of rotary vane (positive displacement) pumps with stainless steel bodies. Maximum working pressure 18.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2104310
Note:
R415 applies to all models except the PRM 05 AZX model.
Size:
⅜” BSP (F)
Marking:
Two adhesive labels on body: 1st label = NU.ER.T, made in Italy. 2nd label = Model no. and manufacturing date (WW-YY).
Installation Requirements:
R001 R415
Expiry date:
30/04/2026
Model:
PRM ** AZX Where ** denotes litre per hour. 05 = 50 litres per hour. 08 = 80 litres per hour. 10 = 100 litres per hour. 15 = 150 litres per hour. 21 = 210 litres per hour. 27 = 270 litres per hour.
Product Images

Approval Holder:
NU.ER.T. Srl
Company Name
NU.ER.T. Srl
Address
Via Codis 5/A Zoppola (PN)
Postcode
33080
Country
Italy
Phone
+39(0)434574147
General Email
info@nuert.it

View All Listings by this Company
Manufacturer:
NU.ER.T. Srl
Company Name
NU.ER.T. Srl
Address
Via Codis 5/A Zoppola (PN)
Postcode
33080
Country
Italy
Phone
+39(0)434574147
General Email
info@nuert.it

View All Listings by this Company

Print This Approval


#2101066

Range of booster pumps with plastic bodies and impellers, EPDM ‘O’-rings and stainless steel inlet manifolds. The product incorporates a non-return valve. The ESYBOX MAX single models are also supplied with an optional 2” BSP (M) x 1¼” BSP (F) plastic inlet adaptor. Maximum working pressure 12.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2101066
Size:
2” BSP (F)
Marking:
DAB, model number, Max Temperature, Max Pressure, CE and other technical Info on adhesive label on body. DAB on control panel face.
Installation Requirements:
R001 R415
Expiry date:
31/01/2026
Model:
Single: ESYBOX MAX 60/120 M 1”1/4 – 2” GAS ESYBOX MAX 60/120 T 1”1/4 – 2” GAS ESYBOX MAX 85/120 T 1”1/4 – 2” GAS Twin: 2ESYBOX MAX 60/120 M 2” GAS 2ESYBOX MAX 60/120 T 2” GAS 2ESYBOX MAX 85/120 T 2” GAS Triple: 3ESYBOX MAX 60/120 M 2” GAS 3ESYBOX MAX 60/120 T 2” GAS 3ESYBOX MAX 85/120 T 2” GAS
Product Images

Approval Holder:
DAB PUMPS SPA
Company Name
DAB PUMPS SPA
Address
Via Marco Polo 14 Mestrino (PD)
Postcode
35035
Country
Italy
General Email
certifications@dwtgroup.com

View All Listings by this Company
Manufacturer:
DAB PUMPS SPA
Company Name
DAB PUMPS SPA
Address
Via Marco Polo 14 Mestrino (PD)
Postcode
35035
Country
Italy
General Email
certifications@dwtgroup.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 4 of 36

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.