`Belzona 1321`. Site applied, two-part, epoxy amine coating available in grey or blue colours. Mix base and hardener in a 11:1 mass ratio. Apply and cure as per manufacturer’s IFU ‘FN10026’, publication number ’02-09-21’. For use with water up to 23°C. These materials are only approved for the mixing conditions that appear on the approval. If the mixing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2109529

Expiry date:

30/09/2026

Approval Holder:

Belzona Limited

Company Name

Belzona Limited

Address

Claro Road, Harrogate, Yorks.

Postcode

HG1 4AY

Phone

+44 1423 567641 Fax: 01423 505967

View All Listings by this Company

‘Sikalastic®-6100 FX White’ (formerly known as ‘MasterSeal 6100 FX White’) ‘Sikalastic®-6100 FX Grey’ (formerly known as ‘MasterSeal 6100 FX Grey’. Site applied, two-component cementitious coating. Mix ‘Sikalastic®-6100 FX White’ (Coat 1) with water in a mass ratio of 15:5.6. Apply and cure for 1 day@5°C before applying Coat 2. Mix ‘Sikalastic®-6100 FX Grey’ (Coat 2) with water in a mass ratio of 15:5.6. Apply and cure for 5 days@5°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2109538

Expiry date:

30/09/2026

Approval Holder:

Sika Services AG

Company Name

Sika Services AG

Address

Tueffenwies 16, CH-8048 Zuerich

Country

Switzerland

Phone

+41 58 436 40 40

General Email

sika@sika.ch

View All Listings by this Company

'Tesnit BA-60'. Orange coloured aramid fibre/NBR gasket material. For use with water up to 85°C. For use only as a gasket material having been tested at a reduced surface area to volume ratio.

Section:

5075 Fibre

Section Subtitle:

These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

WRAS Approval Number:

2110509

Expiry date:

31/10/2026

Approval Holder:

Donit Tesnit d.o.o.

Company Name

Donit Tesnit d.o.o.

Address

Cesta Komandanta Staneta 38, Sl 1215 Medvode

Country

Slovenia

Phone

+386 1 5823 300 Fax: +386 61182 3206

View All Listings by this Company

`Novapress 260`. Green coloured, compressed fibre material (bound with NBR), manufactured by calendaring. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Section:

5075 Fibre

Section Subtitle:

These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

WRAS Approval Number:

2110513

Expiry date:

31/10/2026

Approval Holder:

Frenzelit GmbH

Company Name

Frenzelit GmbH

Address

Frankenhammer, 95460 Bad Berneck, Germany

Phone

Tel: 0049 9273 720 Fax: 0049 9273-222

View All Listings by this Company

'Acquablu Hose'. Extruded hose comprising of a white coloured (transparent) polyethylene inner layer, off-white coloured chlorobutyl second layer, rayon reinforcement layer and blue coloured bromobutyl outer later. For use with water up to 60°C.

Section:

5140 Hoses & Tubing

Expiry date:

31/10/2026

Approval Holder:

IVG Colbachini Spa

Company Name

IVG Colbachini Spa

Address

Via Fossona 132 Cervarese S Croce 35030

Country

Italy

Phone

+39 049 999 7311

View All Listings by this Company