Range of shower arms and ceiling connectors (brass bodies – various finishes) & overhead shower outlets (plastic bodies - various finishes), incorporating EPDM O rings, plastic flow regulators and stainless-steel strainers. Open outlet use only. Maximum operating temperature 60.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240202062

Size:

See models

Marking:

AXOR on body

Installation Requirements:

R001 R040

Expiry date:

28/02/2029

Model:

½” BSP (F) on models 35 373 xxx Overhead shower 245/185 1jet 35 383 xxx Overhead shower 220 1jet EcoSmart 35 389 xxx Overhead shower 245 1jet EcoSmart+ 35 374 xxx Overhead shower 245/185 1jet EcoSmart 35 387 xxx Overhead shower 245/185 1jet EcoSmart+ 35 382 xxx Overhead shower 220 1jet 35 388 xxx Overhead shower 220 1jet EcoSmart+ 35 380 xxx Overhead shower 245 1jet 35 381 xxx Overhead shower 245 1jet EcoSmart ½” BSP (M) X ½” BSP (M) on models: 26 433 xxx Ceiling connector 300 mm 26 436 xxx Shower arm 390 mm square 26 965 xxx Ceiling connector 100 mm softsquare 26 432 xxx Ceiling connector 100 mm 26 431 xxx Shower arm 390 mm 26 437 xxx Ceiling connector 100 mm square 26 438 xxx Ceiling connector 300 mm square 26 966 xxx Ceiling connector 300mm softsquare 26967 xxx Shower arm 390mm softsquare ADDITIONAL INFORMATION: Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of ‘Y’-pattern strainers with a brass or DZR brass body, stainless-steel strainer and PTFE gasket. Maximum operating pressure 20.0 bar. BS6920 85°C.

Section:

1715 Strainers

Size:

½” - 2” BSPT (F) or BSPP (F) or NPT (F).

Marking:

Maplef, size, PN and flow arrow on body. MV70-604 models are also marked CR.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

MV70-604 Size: ½” - 2” BSPT (F) or BSPP (F) or NPT (F). MV70-1604 Size: ½” - 2” BSPT (F) or BSPP (F) or NPT (F).

Approval Holder:

MAPLEF VALVES AND FITTINGS LTD

Company Name

MAPLEF VALVES AND FITTINGS LTD

Address

1488 – 1130 West Pender street Vancouver, BC, V6E 4A4

View All Listings by this Company

Range of ‘H’ strainers with red or blue epoxy coated ductile iron bodies and stainless-steel screens. Maximum operating pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

1715 Strainers

Size:

DN40 - DN800 flanged inlet/outlets.

Marking:

Cla-Val, DN, PN and model number on data plate on flange. Flow arrow, DN and PN on body.

Installation Requirements:

R001

Expiry date:

31/01/2029

Model:

AQUA 90-501/KCO.

Product Images

Approval Holder:

Cla-Val UK Ltd.

Company Name

Cla-Val UK Ltd.

Address

Dainton House 107 Goods Station Road Tunbridge Wells

Postcode

TN1 2DR

Country

United Kingdom

Phone

01892 514400

General Email

liam.kent@cla-val.co.uk

View All Listings by this Company

Range of in-line Y pattern strainers with bronze bodies incorporating two test ports and stainless-steel strainers. Maximum working pressure 25.0 bar. Maximum operating temperature 85⁰ C.

Section:

1715 Strainers

Size:

Hattersley Fig 907 ½” – 2” BSP (F). Hattersley Fig 907AT ½” – 2” NPT (F)

Marking:

Size, PN and flow arrow and HNH (Hattersley logo on body) HNH Fig 907, working pressures and year (YY)of manufacture on ID plate.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

Hattersley Fig 907 and Fig 907AT

Approval Holder:

Hattersley

Company Name

Hattersley

Address

Crane House Epsilon Terrace West Road Ipswich

Postcode

IP3 9FJ

Country

United Kingdom

General Email

uksales@hattersley.com

View All Listings by this Company

Range of pillar taps (chromium plated brass), incorporating ¼ turn ceramic disc headworks with a single lever operating member. The inlets incorporate a plastic flow regulator. The products are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

240102063

Size:

See model.

Marking:

Lota logo on body.

Installation Requirements:

R001 R006

Expiry date:

31/01/2029

Model:

62976-5001: ½” BSP (M). 62981-5001: ¾” BSP (M).

Product Images

Approval Holder:

Xiamen lota international co. ltd

Company Name

Xiamen lota international co. ltd

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Manufacturer:

Xiamen lota international co. ltd

Company Name

Xiamen lota international co. ltd

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Self-closing tap assembly (chromium plated brass) incorporating spring loaded headwork with dome type operating members. The outlet incorporates a flow straightener. The product is supplied with two servicing valves and the inlet connector incorporates an approved check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C.

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

240102046

Size:

Stainless steel braided PEX lined flexible hose assembly or copper tails for connection to a servicing valve with ½” BSP male connector.

Marking:

Delabie logo on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/01/2029

Model:

79500015, 79500015CO.

Product Images

Approval Holder:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Manufacturer:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Range of PVC or EPDM lined shower hoses with stainless steel outer (chrome or black finish) or PVC reinforced (chrome plated finish) outer layer. Maximum operating temperature 65°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2210069

Size:

½” BSP captive nut.

Marking:

Triton on captive nut.

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

Stainless steel double locked hoses: 28100240: 1.0m Electrolytic Chrome. 28100210: 1.25m Electrolytic Chrome. 28100260: 1.75m Electrolytic Chrome. 28100270: 2.0m Electrolytic Chrome. 28100300: 1.5m Electrolytic Chrome. 28100380: 0.75m Electrolytic Chrome. 28100410: 1.5m Matt Black (Satin Black). 28100390: 0.75m Matt Black (Satin Black). 28100400: 1.0m Matt Black (Satin Black). 28100490: 0.75m Matt - Copper coloured 28100500: 1.50m Matt - Copper coloured H2006S* & H2023S* * denotes surface finish and can be replaced with: CE = Electrolytic Chrome or MB = Matt (Satin) Black. PVC reinforced hoses: 28100340: 1.5m Chrome Plated. 28100370: 1.0m Chrome Plated. 28100430: 1.5m Brushed Brass (Golden) coloured Models :28100430,23100490 & 23100500 added 21/07/2023

Approval Holder:

Triton Showers

Company Name

Triton Showers

Address

Triton Road, Nuneaton, Warwickshire

Postcode

CV11 4NR

Country

United Kingdom

Phone

02476 324423

General Email

paulrowley@tritonshowers.co.uk

View All Listings by this Company

Range of shower hoses with a rubber outer layer (various finishes, see models) and either PVC or PEX inner liner (see models), EPDM or NBR O-rings (see models) and either brass or stainless-steel connectors (see models). Open Outlet use only. Maximum operating temperature 85.0°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2312077

Size:

See model

Marking:

HRN (trademark), WRAS and manufacturing date (MM/YY) on the ferrule.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Model Code: 17X-XXX-X-X-X-X The ‘X’s denote multiple parts of the assembly, and are explained below: 1st ‘X’ denotes the DN and can be replaced with: 0 = DN8, 1 = DN10 2nd, 3rd & 4th ‘X’s denotes the length and can be replaced with, as examples: 30 = 30cm Length (Shortest Hose) 300 = 300cm Length (Longest Hose) 5th ‘X’ denotes the colour and can be replaced with: 1 = Black, 2 = White, 3 = Silver, 4 = Rose, 5 = Golden, 6 = Gray. 6th ‘X’ denotes the inlet size and can be replaced with: 1 = ½” BSP (F) Conical Nut, 2 = M20 (F) Conical Nut, 3 = M19 (F) Conical Nut, 4 = M18 (F) Conical Nut. 7th ‘X’ denotes the outlet size and can be replaced with: 1 = ½” BSP (F) Conical Nut, 2 = M20 (F) Conical Nut, 3 = M19 (F) Conical Nut, 4 = M18 (F) Conical Nut. 8th ‘X’ denotes the inner tube material and can be replaced with: 1 = PVC, 2 = PEX.

Approval Holder:

APIS (Xiamen) Co., Ltd.

Company Name

APIS (Xiamen) Co., Ltd.

Address

1F, 5F, Main building No 198-204 YingYao Road

Country

Jimei District

View All Listings by this Company

Manufacturer:

APIS (Xiamen) Co., Ltd.

Company Name

APIS (Xiamen) Co., Ltd.

Address

1F, 5F, Main building No 198-204 YingYao Road

Country

Jimei District

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240202006

Size:

See Models

Marking:

IDC Logo, Size, PN, WRAS and Date of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

GMF series DN6 GMF0613S - M10 short male x 3/8"F captive nut GMF0613L - M10 Long male x 3/8"F captive nut GMF0615S - M10 short male x 1/2"F captive nut GMF0615L - M10 Long male x 1/2"F captive nut GMF0603S - M8 short Male x 3/8"F captive nut GMF0603L - M8 long Male x 3/8"F captive nut DN8 GMF0813S - M10 short male x 3/8"F captive nut GMF0813L - M10 Long male x 3/8"F captive nut GMF0815S - M10 short male x 1/2"F captive nut GMF0815L - M10 Long male x 1/2"F captive nut GMF0803S - M8 short male x 3/8"F captive nut GMF0823S - M12 short male x 3/8"F captive nut GMF0823L - M12 Long male x 3/8"F captive nut GMF0825S - M12 short male x 1/2"F captive nut GMF0825L - M12 Long male x 1/2"F captive nut DN10 GMF1013S - M10 short male x 3/8"F captive nut GMF1013L - M10 Long male x 3/8"F captive nut GMF1015S - M10 short male x 1/2"F captive nut GMF1015L - M10 Long male x 1/2"F captive nut GMF1023S - M12 short male x 3/8"F captive nut GMF1023L - M12 Long male x 3/8"F captive nut GMF1025S - M12 short male x 1/2"F captive nut GMF1025L - M12 Long male x 1/2"F captive nut DN13 GMF1313S - M10 short male x 3/8"F captive nut GMF1313L - M10 Long male x 3/8"F captive nut GMF1315S - M10 short male x 1/2"F captive nut GMF1315L - M10 Long male x 1/2"F captive nut GMF1323S - M12 short male x 3/8"F captive nut GMF1323L - M12 Long male x 3/8"F captive nut GMF1325S - M12 short male x 1/2"F captive nut GMF1325L - M12 Long male x 1/2"F captive nut GAN series DN8 GAN0833 - 3/8"F x 3/8"F captive nut GAN0835 - 3/8"F x 1/2"F captive nut GAN0855 - 1/2"F x 1/2"F captive nut GAN0877 - 3/4"F x 3/4"F captive nut GAN0857 - 1/2"F x 3/4"F captive nut DN10 GAN1033 - 3/8"F x 3/8"F captive nut GAN1055 - 1/2"F x 1/2"F captive nut GAN1077 - 3/4"F x 3/4"F captive nut DN13 GAN1333 - 3/8"F x 3/8"F captive nut GAN1355 - 1/2"F x 1/2"F captive nut GAN1377 - 3/4"F x 3/4"F captive nut GAM series DN8 GAM0833 - 3/8"M x 3/8"F captive nut GAM0835 - 3/8"M x 1/2"F captive nut GAM0853 - 1/2"M x 3/8"F captive nut GAM0855 - 1/2"M x 1/2"F captive nut GAM0877 - 3/4"M x 3/4"F captive nut DN10 GAM1033 - 3/8"M x 3/8"F captive nut GAM1035 - 3/8"M x 1/2"F captive nut GAM1053 - 1/2"M x 3/8"F captive nut GAM1055 - 1/2"M x 1/2"F captive nut GAM1077 - 3/4"M x 3/4"F captive nut DN13 GAM1333 - 3/8"M x 3/8"F captive nut GAM1335 - 3/8"M x 1/2"F captive nut GAM1353 - 1/2"M x 3/8"F captive nut GAM1355 - 1/2"M x 1/2"F captive nut GAM1377 - 3/4"M x 3/4"F captive nut GMM series DN8 GMM0833 - 3/8"M x 3/8"M GMM0855 - 1/2"M x 1/2"M DN10 GMM1033 - 3/8"M x 3/8"M GMM1055 - 1/2"M x 1/2"M GMM1055 - 1/2"M x 1/2"M DN13 GMM1355 - 1/2"M x 1/2"M GMM1377 - 3/4"M x 3/4"M GEF series DN8 GEF0833 - 3/8"Elbow F x 3/8"F GEF0835 - 3/8"Elbow F x 1/2"F GEF0853 - 1/2"Elbow F x 3/8"F GEF0855 - 1/2"Elbow F x 1/2"F DN10 GEF1055 - 1/2"Elbow F x 1/2"F GEF1057 - 1/2"Elbow F x 3/4"F GEF1077 - 3/4"Elbow F x 3/4"F DN13 GEF1355 - 1/2"Elbow F x 1/2"F GEF1357 - 1/2"Elbow F x 3/4"F GEF1377 - 3/4"Elbow F x 3/4"F GEM series DN8 GEM0833 - 3/8"Elbow F x 3/8"M GEM0835 - 3/8"Elbow F x 1/2"M GEM0853 - 1/2"Elbow F x 3/8"M GEM0855 - 1/2"Elbow F x 1/2"M DN10 GEM1055 - 1/2"Elbow F x 1/2"M GEM1057 - 1/2"Elbow F x 3/4"M GEM1077 - 3/4"Elbow F x 3/4"M DN13 GEM1355 - 1/2"Elbow F x 1/2"M GEM1357 - 1/2"Elbow F x 3/4"M GEM1377 - 3/4"Elbow F x 3/4"M GMC series DN8 GMC0815S - M10 short male x 15mm compression GMC0815L - M10 Long male x 15mm compression GMC0825S - M12 short male x 15mm compression GMC0825L - M12 Long male x 15mm compression DN10 GMC1015S - M10 short male x 15mm compression GMC1015L - M10 Long male x 15mm compression GMC1025S - M12 short male x 15mm compression GMC1025L - M12 Long male x 15mm compression DN13 GMC1315S - M10 short male x 15mm compression GMC1315L - M10 Long male x 15mm compression GMC1325S - M12 short male x 15mm compression GMC1325L - M12 Long male x 15mm compression GAC series DN8 GAC0855 - 15mm compression x 1/2"F captive nut GAC0857 - 15mm compression x 3/4"F captive nut GAC0877 - 22mm compression x 3/4"F captive nut DN10 GAC1053 - 15mm compression x 3/8"F captive nut GAC1055 - 15mm compression x 1/2"F captive nut GAC1057 - 15mm compression x 3/4"F captive nut GAC1077 - 22mm compression x 3/4"F captive nut DN13 GAC1355 - 15mm compression x 1/2"F captive nut GAC1357 - 15mm compression x 3/4"F captive nut GAC1377 - 22mm compression x 3/4"F captive nut GAC1977 - DN19 22mm compression x 3/4"F captive nut GVF series DN8 GVF0855 - 15mm isolating valve x 1/2"F captive nut GVF0877 - 22mm isolating valve x 3/4"F captive nut DN10 GVF1055 - 15mm isolating valve x 1/2"F captive nut GVF1057 - 15mm isolating valve x 3/4"F captive nut GVF1077 - 22mm isolating valve x 3/4"F captive nut DN13 GVF1355 - 15mm isolating valve x 1/2"F captive nut GVF1377 - 22mm isolating valve x 3/4"F captive nut GVF1977 - DN19 22mm isolating valve x 3/4"F captive nut GDC series DN8 GDC0855 - 15mm compression x 15mm compression GDC0877 - 22mm compression x 22mm compression DN GDC1055 - 15mm compression x 15mm compression GDC1077 - 22mm compression x 22mm compression DN13 GDC1355 - 15mm compression x 15mm compression GDC1377 - 22mm compression x 22mm compression DN19 GDC1977 - 22mm compression x 22mm compression GDEF series DN13 GDEF1355 - 1/2"Elbow F x 1/2"Elbow F

Product Images

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Ltd

Company Name

IDC Plumbing & Heating Technology (Beijing) Ltd

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC Fluid Control Co., Ltd.

Company Name

IDC Fluid Control Co., Ltd.

Address

Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

Country

China

General Email

View All Listings by this Company

Range of stainless steel braided, EPDM lined flexible hose assemblies. Models are available with a variety of end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240202045

Size:

DN8 - DN19

Marking:

FF logo, Year of manufacture (YY) and WRAS on ferrule

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

DN8: H334-C-W - 15mm compression end -M12x1 male short H335-L-W - 15mm compression end - M12 x1 male long H336-L-W - 15mm compression end - M10 x1 male long H337-C-W - 15mm compression end - M10 x1 male short H225-C-W - 1/2" BSP (F) - M10 x1 male short H225-L-W - 1/2" BSP (F) - M10 x1 male long H233-C-W - 3/8" BSP (F) - M10 x1 male short H233-L-W - 3/8" BSP (F) - M10 x1 male long H392-W - 3/8" BSP (F) 90° - 3/8" BSP (F) conical seat H420-W - 3/8" BSP (F) - 3/8" BSP (F) conical seat H600-W - 3/8" BSP (F) 90°- 3/8" BSP (F) 90° conical seat DN10: A113-W - 1/2" BSP (F) - 15 mm compression end B114-W - 3/4" BSP (F) - 15 mm compression end A327-W - 15mm compression end - 15mm compression end A111-W - 1/2" BSP (F) Filling loop - 1/2" BSP (F) Filling loop E203-W - 3/8" BSP (F) - 3/8” BSP (F) 90° E204-W - 1/2" BSP (F) - 1/2” BSP (F) 90° E206-W - 3/4" BSP (F) - 3/4" BSP (F) 90° E290-W - 1/2" BSP (F) - 3/4" BSP (F) 90° E893-W - 3/4" BSP (F) 90° - 3/4" BSP (F) 90° E520-W - 1/2" BSP (M) - 1/2” BSP (F) 90° E201-W - 1/2" BSP (F) - 1/2" BSP (F) E198-W - 1/2" BSP (M) – 1/2" BSP (F) E487-W - 3/4" BSP (F) - 3/4" BSP (F) E200-W - 3/8" BSP (F) - 3/8” BSP (F) E573-W - 1/2" BSP (F) 90° - ½” BSP (F) 90° E752-W - 3/8" BSP (F) 90° - 3/8” BSP (F) 90° E693-W - 1/2" BSP (F) 90° - ¾” BSP (F) 90° DN13: B115-W - 3/4" BSP (F) - 22mm compression end A343-W - 1/2" BSP (F) - 15mm compression end C338-W - 3/4" BSP (F) - 15mm compression end B395-W - 22mm compression end - 22 mm compression end F478-W - 1/2" BSP (F) - 15mm straight tube A327-GW - 15mm compression end - 15mm compression end F342-W - 15mm straight tube - 15mm straight tube F764-W - 1/2" BSP (F) Filling loop - 15mm compression end F800-W - 1/2" BSP (F) 90° Filling loop - 15mm compression end F213-W - 1/2" BSP (F) - ½” BSP (F) 90° F214-W - 1/2" BSP (M) - ½” BSP (F) 90° F215-W - 3/4" BSP (F) - 3/4" BSP (F) 90° F217-W - 3/4" BSP (M) - 3/4" BSP (F) 90° F493-W - 1/2" BSP (F) - 3/4" BSP (F) 90° F350-W - 3/4" BSP (F) 90°- 3/4" BSP (F) 90° F207-W - 1/2" BSP (M) – 1/2" BSP (F) F210-W - 1/2" BSP (F) - 1/2" BSP (F) F211-W - 3/4" BSP (F) - 3/4" BSP (F) F209-W - 3/4" BSP (M) - 3/4" BSP (F) F373-W - 3/4" BSP (F) - 1/2" BSP (F) F888-W - 1/2" BSP (F) 90° - ½” BSP (F) 90° DN16: N525-W - 3/4" BSP (F) - 3/4" BSP (F) 90° N539-W - 3/4" BSP (F) - 3/4" BSP (F) N637-W - 3/4" BSP (M) - 3/4" BSP (F) N526-W - 3/4" BSP (F) 90° - 3/4" BSP (F) 90° DN19: C753-W - 3/4" BSP (F) - 22mm straight tube C754-W - 3/4" BSP (F) - 22mm compression end C597-W - 22mm straight tube - 22mm straight tube C431-W - 3/4" BSP (F) - 3/4" BSP (F) C755-W - 22mm compression end - 22mm compression end

Product Images

Approval Holder:

Flexinox Srl.

Company Name

Flexinox Srl.

Address

Via F. Comelli, 40-33034 Fagana, Udine

Country

Italy

View All Listings by this Company

Manufacturer:

Flexinox Srl.

Company Name

Flexinox Srl.

Address

Via F. Comelli, 40-33034 Fagana, Udine

Country

Italy

View All Listings by this Company