Range of stainless steel press-fit fittings (316L) and pipes (316L - EN 10312), the fitttings incorporate EPDM O-rings. Crimp joint is achieved by a M profile crimp jaws. Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312316

Size:

see models

Marking:

Fittings - CHNCON & Size on body. Pipe – CHNCON & Size.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

SM01 EQUAL COUPLING: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM02 SLIP COUPLING: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM03 REDUCER MF: 18-15mm, 22-15mm, 22-18mm, 28-15mm, 28-18mm, 28-22mm, 35-18mm, 35-22mm, 35-28mm, 42-22mm, 42-28mm, 42-35mm, 54-22mm, 54-28mm, 54-35mm, 54-42mm, 76.1-42mm, 76.1-54mm, 88.9-54mm, 88.9-76.1mm, 108-76.1mm, 108-88.9mm. SM04 90° ELBOW FF: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM05 90°ELBOW MF: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM06 45° ELBOW FF: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM07 45° ELBOW MF: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SS01 90° ELBOW WITH PLANE ENDS: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SS02 SHORT PIPE BRIDGE: 15mm, 18mm, 22mm, 28mm. SS03 LONG PIPE BRIDGE: 15mm, 18mm, 22mm, 28mm. SM08 EQUAL TEE: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM09 REDUCING TEE: 18-15-18mm, 22-15-22mm, 22-18-22mm, 28-15-28mm, 28-18-28mm, 28-22-28mm, 35-15-35mm, 35-18-35mm, 35-22-35mm, 35-28-35mm, 42-15-42mm, 42-18-42mm, 42-22-42mm, 42-28-42mm, 42-35-42mm, 54-15-54mm, 54-18-54mm, 54-22-54mm, 54-28-54mm, 54-35-54mm, 54-42-54mm, 76.1-22-76.1mm, 76.1-28-76.1mm, 76.1-35-76.1mm, 76.1-42-76.1mm, 76.1-54-76.1mm, 88.9-22-88.9mm, 88.9-28-88.9mm, 88.9-35-88.9mm, 88.9-42-88.9mm, 88.9-54-88.9mm, 88.9-76.1-88.9mm, 108-22-108mm, 108-28-108mm, 108-35-108mm, 108-42-108mm, 108-54-108mm, 108-76.1-108mm, 108-88.9-108mm. SM10 TEE WITH MALE THREAD END: 15-R 1/2''-15mm, 18-R 1/2''-18mm, 22-R 3/4''-22mm, 28-R 1''-28mm, 35-R 1 1/4''-35mm. SM11 TEE WITH FEMALE THREAD END: 15-Rp 1/2''-15mm, 18-Rp 1/2''-18mm, 18-Rp 3/4''-18mm, 22-Rp 1/2''-22mm, 22-Rp 3/4''-22mm, 28-Rp 1/2''-28mm, 28-Rp 3/4''-28mm, 28-Rp 1''-28mm, 35-Rp 1/2''-35mm, 35-Rp 3/4''-35mm, 35-Rp 1''-35mm, 35-Rp 1 1/4''-35mm, 42-Rp 1/2''-42mm, 42-Rp 3/4''-42mm, 42-Rp 1''-42mm, 42-Rp 1 1/2''-42mm, 54-Rp 1/2''-54mm, 54-Rp 3/4''-54mm, 54-Rp 1''-54mm, 54-Rp 2''-54mm, 76.1-Rp 3/4''-76.1mm, 76.1-Rp 2''-76.1mm, 88.9-Rp 3/4''-88.9mm, 88.9-Rp 2''- 88.9mm, 108-Rp 3/4''-108mm, 108-Rp 2''-108mm. SM12 90° FEMALE ELBOW: 15mm-Rp 1/2'', 18mm-Rp 1/2'', 22mm-Rp 3/4'' , 28mm-Rp 1''. SM13 90° ELBOW WITH MALE THREAD END: 15mm-R 1/2'', 18mm-R 1/2'', 22mm-R 3/4'' , 28mm-R 1'', 35mm-R 1 1/4'', 42mm-R 1 1/2'', 54mm-R 2''. SM14 90°ELBOW WITH FEMALE THREAD END: 15mm-R 1/2'', 18mm-R 1/2'', 22mm-R 3/4'' , 28mm-R 1'', 35mm-R 1 1/4'', 42mm-R 1 1/2'', 54mm-R 2''. SM15 FEMALE ELBOW WITH WALL PLATE: NW-15mm-Rp 1/2'', NW-18mm-Rp 1/2'', NW-22mm-Rp 1/2''. SM16 MALE ADAPTOR: 15mm-R 1/2'', 18mm-R 1/2'', 18mm-R 3/4'', 22mm-R 1/2'', 22mm-R 3/4'', 22mm-R 1'', 28mm-R 3/4'', 28mm-R 1'', 35mm-R 1'', 35mm-R 1 1/4'', 42mm-R 1 1/4'', 42mm-R 1 1/2'', 54mm-R 1 1/2'', 54mm-R 2'', SM17 FEMALE ADAPTOR: 15mm-Rp 1/2'', 15mm-Rp 3/4'', 18mm-Rp 1/2'', 18mm-Rp 3/4'', 22mm-Rp 1/2'', 22mm-Rp 3/4'', 22mm-Rp 1'', 28mm-Rp 3/4'', 28mm-Rp 1'', 35mm-Rp 1'', 35mm-Rp 1 1/4'', 42mm-Rp 1 1/4'', 42mm-Rp 1 1/2'', 54mm-Rp 1 1/2'', 54mm-Rp 2''. SS04 MALE CONNECTOR: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 28mm- 1'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SS05 FEMALE CONNECTOR: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 28mm- 1'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SM18 ADAPTOR WITH UNION NUT: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 22mm- 1'', 28mm- 1'', 28mm- 1 1/4'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SM19 ADAPTOR UNION WITH MALE THREAD: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 28mm- 1'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SM20 ADAPTOR UNION WITH FEMALE THREAD: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 28mm- 1'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SM21 CAP: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM22 FLANGE WITH PRESS-JOINT: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SP 1620 Stainless Steel Pipe - Φ x TH: 15mm x 1, 18mm x 1, 22mm x 1.2, 28mm x 1.2, 35mm x 1.5, 42mm x 1.5, 54mm x 1.5, 76.1mm x 2, 88.9mm x 2, 108mm x 2.

Approval Holder:

ZHEJIANG ZHENGKANG INDUSTRIAL CO.,LTD.

Company Name

ZHEJIANG ZHENGKANG INDUSTRIAL CO.,LTD.

Address

: NO.678 Dingxiang Road, Binhai Garden, Economic and Technological Development Zone, Wenzhou

Country

China

View All Listings by this Company

Range of stainless steel press-fit fittings (316L or 304) and pipes (SUS316L or SUS304 - EN 10312), the fitttings incorporate EPDM O-rings. Crimp joint is achieved by a M profile crimp jaws. Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312317

Size:

see models

Marking:

Fittings - PIPRESS, size and stainless steel grade (SUS316L or SUS304). Pipe - PIPRESS, size and stainless steel grade (SUS316L or SUS304).

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Stainless Steel Press Connector: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Adjustable Connector: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Reducing connector: 18x15mm, 22x15mm, 22x18mm, 28x15mm, 28x18mm, 28x22mm, 35x15mm, 35x18mm, 35x22mm, 35x28mm, 42x15mm, 42x18mm, 42x22mm, 42x28mm, 42x35mm, 54x15mm, 54x18mm, 54x22mm, 54x28mm, 54x35mm, 54x42mm, 76.1x54mm, 88.9x54mm, 88.9x76.1mm, 108x54mm, 108x76.1mm, 108x88.9mm. Stainless Steel Press B-type reducing connector: 18x15mm, 22x15mm, 22x18mm, 28x15mm, 28x18mm, 28x22mm, 35x15mm, 35x18mm, 35x22mm, 35x28mm, 42x15mm, 42x18mm, 42x22mm, 42x28mm, 42x35mm, 54x15mm, 54x18mm, 54x22mm, 54x28mm, 54x35mm, 54x42mm, 76.1x54mm, 88.9x54mm, 88.9x76.1mm, 108x54mm, 108x76.1mm, 108x88.9mm. Stainless Steel Press A-type 90°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press B-type 90°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press A-type 45°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press B-type 45°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press End cap: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Equal tee: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Reducing Tee: 18×15mm, 22×15mm, 22×18mm, 28×15mm, 28×18mm, 28×22mm, 35×15mm, 35×18mm, 35×22mm, 35×28mm, 42×15mm, 42×18mm, 42×22mm, 42×28mm, 42×35mm, 54×15mm, 54×18mm, 54×22mm, 54×28mm, 54×35mm, 54×42mm, 76.1×22mm, 76.1×28mm, 76.1×35mm, 76.1×42mm, 76.1×54mm, 88.9×22mm, 88.9×28mm, 88.9×35mm, 88.9×42mm, 88.9×54mm, 88.9×76.1mm, 108×22mm, 108×28mm, 108×35mm, 108×42mm, 108×54mm, 108×76.1mm, 108×88.9mm. Stainless Steel Pipe Bridge: 15mm, 18mm, 22mm, 28mm. Stainless Steel Press Female adapter: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×3/4'', 28mm×1'', 35mm×1'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/4'', 42mm×1-1/2'', 54mm×1-1/2'', 54mm×2'', 76.1mm×2-1/2'', 88.9mm×3'', 108mm×4''. Stainless Steel Press Female Swivel adapter: 15mm×1/2'', 15mm×3/4'', 18mm×1/2'', 18mm×3/4'', 22mm×3/4'', 22mm×1‘’, 28mm×1'', 28mm×1-1/4'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/2'', 42mm×2'', 54mm×2'', 76.1mm×2-1/2'', 88.9mm×3'', 108mm×4''. Stainless Steel Press Male threaded adapter: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×3/4'', 28mm×1'', 35mm×1'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/4'', 42mm×1-1/2'', 54mm×1-1/2'', 54mm×2'', 76.1mm×2-1/2'', 88.9mm×3'', 108mm×4''. Stainless Steel Press Female threaded 90°elbow: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×1'', 35mm×1-1/4'', 42mm×1-1/2'', 54mm×2''. Stainless Steel Press Female threaded 90°elbow with bracket: 15mm×1/2'', 18mm×1/2'', 22mm×1/2'', 22mm×3/4'', 28mm×1'', 35mm×1-1/4''. Stainless Steel Press Female Short 90°elbow: 15mm×1/2'', 18mm×1/2'', 22mm×1/2'', 22mm×3/4'', 28mm×1'', 35mm×1-1/4''. Stainless Steel Press Male threaded 90°elbow: 15mm× 1/2'', 18mm× 1/2'', 22mm× 1/2'', 22mm× 3/4'', 28mm× 1'', 35mm× 1-1/4'', 42mm× 1-1/2'', 54mm× 1-1/2'', 54mm× 2''. Stainless Steel Press Female Threaded Tee: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×1/2'', 28mm×3/4'', 28mm×1'', 35mm×1/2'', 35mm×3/4'', 35mm×1'', 35mm×1-1/4'', 42mm×1/2'', 42mm×3/4'', 42mm×1-1/2'', 54mm×1/2'', 54mm×3/4'', 54mm×2'', 76.1mm×3/4'', 76.1mm×2'', 88.9mm×3/4'', 88.9mm×2'', 108mm×3/4'', 108mm×2''. Stainless Steel Press Male Threaded Tee: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×1/2'', 28mm×3/4'', 28mm×1'', 35mm×3/4'', 35mm×1-1/4'', 42mm×3/4'', 42mm×1-1/2'', 54mm×3/4'', 54mm×2'', 76.1mm×3/4'', 76.1mm×2'', 88.9mm×3/4'', 88.9mm×2'', 108mm×3/4'', 108mm×2''. Stainless Steel Press Flange: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press 3Pcs Union Male swivel adapter: 15mm×1/2'', 15mm×3/4'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 22mm×1'', 28mm×3/4'', 28mm×1'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/2'', 54mm×2'', 76.1mm×3/4'', 76.1mm×2'', 88.9mm×3/4'', 88.9mm×2'', 108mm×3/4'', 108mm×2''. PIPRESS-Stainless Steel Pipe: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm.

Approval Holder:

ZHEJIANG QILU TECHNOLOGY CO., LTD.

Company Name

ZHEJIANG QILU TECHNOLOGY CO., LTD.

Address

BUILDING24, No.1399 LIANGMU ROAD, HANGZHOU

Country

China

View All Listings by this Company

Range of press fit fittings with PPSU bodies incorporating stainless steel crimp sleeves and EPDM O-Rings for use with Multitubo multi-layer pipes. Maximum working pressure is 10.0 bar. Maximum operating temperature is 70°C.

Section:

1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer

Section Subtitle:

Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.

WRAS Approval Number:

2309926

Size:

16mm, 20mm,25mm, 32mm

Marking:

Multitubo & size on the fittings, Multitubo, material type & size on the pipe.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

Range of press fittings, dim 16 to 32 mm Press-elbow 90° 53010 16mm 53030 20mm 53040 25mm 53050 32mm Press-Tee 55010 55011 55030 55031 55032 55033 55040 55041 55042 55043 55050 55051 55052 55053 Press-coupling 57010 57030 57031 57040 57041 57042 57050 57052 Pipes 10011, 10010 & 10015 MULTITUBO 16x2- coil, box 10030 MULTITUBO 20x2,25 - coil, box 10040 MULTITUBO 25x2,5- coil, box 10051 MULTITUBO 32x3- coil, box 15012 & 15013 MULTITUBO 16x2 -bar 15030 & 15031 MULTITUBO 20x2,25-bar 15040 & 15041 MULTITUBO 25x2,5-bar 15050 & 15051 MULTITUBO 32x3-bar

Approval Holder:

DW Verbundrohr GmbH

Company Name

DW Verbundrohr GmbH

Address

Langer Rain 38, D-97437 Hassfurt

Country

Germany

Phone

+49 (0) 9521 95356-0

View All Listings by this Company

Range of Talbot pushfit fittings with polyprolylene or acetal bodies and EPDM o-rings for use with MDPE PE80 pipe (BS EN 12201). For use above and below ground use. Maximum working pressure 16 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2310389

Size:

See models for pushfit fittings. Copper compression fittings – 15mm & 22mm for use with copper (EN1057).

Marking:

Talbot, size and pressure rating moulded on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

Adaptor Male Thread - Type 1 Solid Body 20mm – 63mm: E6581; E6580; E6579; E6582; E9128; E3515; E3516; E10423. Adaptor Male Thread - Type 2 Cone and body 20mm – 32mm: E2729; E2371; E2732. Adaptor Female Thread - Type 1 Solid Body 20mm – 63mm: E11082; E5095; E3578; E5092; E5096; E3517; E8532; E6588; E8534; E8535; E8536. Adaptor Female Thread - Type 2 Cone and body 20mm – 32mm: E2730; E2735; E5094: E5098; E2736; E8625. Adaptor Female – Copper - Type 1 Solid Body 20mm for Above ground use ONLY: E4145. Adaptor Female – Copper - Type 2 Cone and Body 20mm - 25mm for Above ground use ONLY: E4147; E5182. Tank Connector - Type 1 Solid Body 25mm: E7248. Connector Body - Type 1 Solid Body 20mm – 63mm: E3520; E3521; E2831; E3522; E3523; E3995; E3524; E3525; E7283; E3996. Connector – Body Type 2 Cone and Body 20mm – 32mm: E2822; E2825; E2826; E2829; E2833. Equal Tee Connector - Type 1 Solid Body 20mm – 63mm: E3537; E3538; E3033; E3363; E3038; E3039; E3998; E3997. Equal Tee Connector - Type 2 Cone and Body 20mm – 32mm: E3032; E3037; E3042; E3036; E3040; E3041. Tee Connector P/f x F/Thread - Type 1 Solid Body 20mm – 63mm: E3035; E3043; E3044; E3045; E4355; E4356. Bend / Elbow Connector Body - Type 1 Solid Body 20mm – 63mm: E7734; E9010; E3518; E3519. Bend / Elbow Connector Body - Type 2 Cone and Body 20mm – 32mm: E2781; E2783; E2784. Elbow Connector Body P/F x F/Thread - Type 1 Solid Body 20mm – 63mm: E6151; E6152; E6153; E6154; E4353; E4354; E2787. Elbow Connector Body P/F x F/Thread - Type 2 Cone and Body 20mm – 32mm: E2782; E2789; 2788. Elbow Connector Body P/F x M/Thread - Type 1 Solid Body 25mm – 32mm: E4670; E4671. Stop End - Type 1 Solid Body 20mm – 63mm: E3364; E3365; E3366; E5097; E4375. Wall Plate Elbow - Type 1 Solid Body 20mm – 32mm: E2798; E2799; E2800. Repair Connector Straight - Type 1 Solid Body 20mm – 32mm: E7782; E7777; E7778.

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Range of blue epoxy coated ductile iron flanged dismantling fittings with EPDM sealing rings. Maximum working pressure 16.0 Bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

2312021

Size:

DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1100, DN1200, DN1400, DN1500, DN1600 & DN1800 Flanged

Marking:

Vortex Qingdao logo and size on plate on body. Size and PN on body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

WD8616B

Approval Holder:

Vortex Qingdao Pipe Fitting Co., Ltd.

Company Name

Vortex Qingdao Pipe Fitting Co., Ltd.

Address

No.4, chongxiang Road, Lancun Town, Jimo District, Qingdao, Shandong Province

Country

China

View All Listings by this Company