Range of wall mounted spout outlets (brass bodies – various finishes) incorporating NBR O-rings and plastic aerators. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

240688001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Villeroy & Boch logo on cover plate. Model (TVT105505110xx) Villeroy & Boch logo on spout.

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

TVT103505000xx, TVT104505000xx, TVT105505110xx, TVT125002000xx. Where xx denotes the surface finish (which is a non-water contact part): 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Range of wall mounted or floor standing spout outlets (fixed or swivel - see model in various finishes). All models incorporate a plastic flow straightener, except for the 93-Floor Mounted Bath Filler which has a plastic aerator.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2303079

Note:

Open outlet use only.

Size:

½” BSP (F).

Marking:

ABI on tab base

Installation Requirements:

R001 R040

Expiry date:

31/03/2028

Model:

Floor Mounted Bath Filler 12126 – Matte Black 12128 – Brushed Brass 12127 – Brushed Nickel 12125 - Chrome 12130 – Brushed Copper 12131 - White 12129 – Brushed Gunmetal Wall Mounted Spout 15386 – Brushed Nickel 15388 – Matte Black 15385 – Brushed Gunmetal 16704 – Tumbled Aged Brass 15383 – Brushed Brass 15384 – Brushed Copper 11666 - White 15387 - Chrome Mini Wall Mounted Spout 15379 – Brushed Nickel 15381 – Matte Black 15376 – Brushed Brass 12292 – Brushed Copper 15380 - Chrome 12293 - White 12291 – Brushed Gunmetal Kingsley Wall Mounted Spout 15367 - Chrome 14654 – Matte Black 15366 – Brushed Nickel 15365 – Brushed Brass 16929 – Brushed Copper

Approval Holder:

ABI INTERIORS PTY LTD

Company Name

ABI INTERIORS PTY LTD

Address

316 DESIGN CENTRE EAST LONDON

Postcode

SW10 0XE

View All Listings by this Company

Range of chemical dosing equipment. The outlet of the injector incorporates a connection for injection of chemicals via venturi action. Max operating pressure 5.9 bar. Cold water only

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

240704714

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Only suitable for use with chemicals no greater than a FC3, additional backflow protection is required for chemicals greater than FC3. When used where the risk is greater than FC3, IRN 415 applies.

Size:

¾” BSP (F) Captive nut

Marking:

HYDRO on front panel.

Installation Requirements:

R001 R040 R160

Expiry date:

31/07/2029

Model:

HYDSP0121 LiquidSense Pro HYDSP0122 LiquidSense Pro HYDSP0123 LiquidSense Pro HYDSP6347 Penguin Pro HYDSP6348 Penguin Pro HYDSP6997 Penguin HYD85125GB EvoDose HYD850353GB EvoDose HYD859411GB EvoDose HYD39111GB Accudose 2 HYD39101GB Accudose 2

Approval Holder:

PSG Hydro

Company Name

PSG Hydro

Address

Hochstrasse 150-152 47228 Duisburg

Country

Germany

View All Listings by this Company

Manufacturer:

PSG Hydro

Company Name

PSG Hydro

Address

Hochstrasse 150-152 47228 Duisburg

Country

Germany

View All Listings by this Company

Range of cylindrical or tubular expansion vessels with epoxy coated carbon steel bodies. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” or 1” BSP (M)

Marking:

Trade-Tec, Zilmet and technical information on adhesive label

Installation Requirements:

R001 R530

Expiry date:

30/06/2029

Model:

11GS000804 (8L Tradetec). 11GS001204 (12L Tradetec). 11GS001904 (18L Tradetec). 11GS002404 (24L Tradetec). 11GS003504 (35L Tradetec). 11GS005004 (50L Tradetec). 11GS006004 (80L Tradetec). 11GS008004 (100L Tradetec).

Approval Holder:

Zilmet UK Limited

Company Name

Zilmet UK Limited

Address

Airfield Industrial Estate, Hixon, Stafford

Postcode

ST18 0PF

Phone

01889 272 185

General Email

sales@zilmet.co.uk

View All Listings by this Company

Manufacturer:

Zilmet Spa

Company Name

Zilmet Spa

Address

35010 Limena (Padova) Via Del Santo 242 Italy

Phone

+ 49 8840662 Fax: + 49 767321 Telex: 430181

General Email

View All Listings by this Company

Range of expansion vessels with butyl membranes. Maximum working pressure 8.0, 10.0, 16.0 or 20.0 bar (please refer to model). Maximum operating temperature 70 or 100°C (please refer to model).

Section:

1000 Expansion Vessels

WRAS Approval Number:

2207089

Note:

Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.

Size:

Please refer to model.

Marking:

CORE model, capacity, maximum operating pressure and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

CORE (35, 50, 80, 100 & 150 Litres) Vertical: 10.0 Bar, 100°C, 1” BSP (M). CORE (200, 300 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). CORE (8, & 12 Litres): 10.0 Bar, 100°C, ¾” BSP (M). CORE (18 & 24 Litres): 10.0 Bar, 100°C, 1” BSP (M).

Approval Holder:

Smith Brothers Stores Limited

Company Name

Smith Brothers Stores Limited

Address

Unit V2 Winchester Avenue, Blaby, Leicester

Postcode

LE8 4GZ

Phone

0116 222 7330

General Email

kel.phillips@sbs.co.uk

View All Listings by this Company