Water Regulations Approval Scheme Ltd

Tubes

Section Code 1863 : Elastomeric.

WRAS Approval Number: #241202067

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections. Maximum working pressure: 6.0 bar @ 65°C Maximum working pressure: 12.0 bar @ 20°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 241202067
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: 12BAR @ 20°C
Size:: See model
Marking:: Qualflex, QWRAS, 6bar@65°c /12 bar @20°c, DOM (M.YY) stamped on ferrule
Installation Requirements:: R001 R008
Expiry date:: 31/12/2029
Model:: (HOSE900001): DN10 x Brass 3/4BSP Female Elbow x Brass 1/2BSP Female straight. (HOSE202105): DN10 x Brass 3/4BPP Female Straight x Brass 3/4BSP Male (HOSE900004): DN10 x Brass 3/8BSP Female Elbow x Brass 1/2BSP Female straight (HOSE202107): DN10 x Brass 3/4BSP Female Elbow x Brass 3/4BSP Female straight. (HOSE265012) : DN10 x Brass 15mm Compression x Brass 3/8NPT Male

Approval Holder:: Reliance Worldwide Corporation

Company Name
Reliance Worldwide Corporation
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company
Manufacturer:: Hydralectric Group Ltd.

Company Name
Hydralectric Group Ltd.
Address
5 High Road, Byfleet, Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200
General Email
jamie.balkwill@hydralectric.com

View All Listings by this Company
Manufacturer:: Hydralectric Group Ltd.

Company Name
Hydralectric Group Ltd.
Address
5 High Road, Byfleet, Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200
General Email
jamie.balkwill@hydralectric.com

View All Listings by this Company

WRAS Approval Number: #2301375

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2301375
Size:: DN8 with end connections: M10, M12, F3/8”, F1/2”, 14.7mm & 15mm. DN10 with end connections: M10, M12, F3/8”, F1/2”, F3/4”, 14.7mm, 15mm & 22mm. DN13 with end connections: F1/2”, F3/4”, 14.7mm, 15mm & 22mm.
Marking:: Aqua Pro, WRAS & year of manufacture YYYY on ferrule
Installation Requirements:: R001
Expiry date:: 31/01/2028
Model:: APSS5360 SS FLEXIBLE PIPE 1/2" X 1/2" X 60CM APSS5345 SS FLEXIBLE PIPE 1/2" X 1/2" X 45CM APSS5330 SS FLEXIBLE PIPE 1/2" X 1/2" X 30CM APSS5390 SS FLEXIBLE PIPE 1/2" X 1/2" X 90CM APSS3860 SS FLEXIBLE PIPE 3/8" X 3/8" X 60CM APSS3845 SS FLEXIBLE PIPE 3/8" X 3/8" X 45CM APSS3830 SS FLEXIBLE PIPE 3/8" X 3/8" X 30CM APSS123860 SS FLEXIBLE PIPE 1/2" X 3/8" X 60CM APSS123845 SS FLEXIBLE PIPE 1/2" X 3/8" X 45CM

Approval Holder:: Ultimate Trading Co(L.L.C.)

Company Name
Ultimate Trading Co(L.L.C.)
Address
No 2 Street 13D Nakheei Road, Deira Dubai
Country
U.A.E

View All Listings by this Company

WRAS Approval Number: #250404006

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Models with compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 250404006
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN8 bore diameter hose with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 20= M10*(12‐110) with single O‐ring or double O-ring 21= M11*(12‐110) with single O‐ring or double O-ring 22= M12*(12‐110) with single O‐ring or double O-ring 23= M14*(12‐110) with single O‐ring or double O-ring 24= M15*(12‐110) with single O‐ring or double O-ring 25= M16*(12‐110) with single O‐ring or double O-ring 26= F15 27= 15mm smooth tube 31= 15mm compression fitting 35= 10mm pushfit 38= 22mm pushfit 39= 10mm pushfit isolation valve 41= 15mm pushfit isolation valve 42= 22mm pushfit isolation valve DN10 bore diameter hose with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 16= F1 17= F1 elbow 18= M1 20= M10*(12‐110) with single O‐ring or double O-ring 21= M11*(12‐110) with single O‐ring or double O-ring 22= M12*(12‐110) with single O‐ring or double O-ring 23= M14*(12‐110) with single O‐ring or double O-ring 24= M15*(12‐110) with single O‐ring or double O-ring 25= M16*(12‐110) with single O‐ring or double O-ring 27= 15mm smooth tube 28= 22mm smooth tube 31= 15mm compression fitting 35= 10mm pushfit 38= 22mm pushfit 39= 10mm pushfit isolation valve 41= 15mm pushfit isolation valve 42= 22mm pushfit isolation valve DN13 bore diameter hose with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 16= F1 17= F1 elbow 18= M1 24= M15*(12‐110) with single O‐ring or double O-ring 25= M16*(12‐110) with single O‐ring or double O-ring 27= 15mm smooth tube 28= 22mm smooth tube 31= 15mm compression fitting 38= 22mm pushfit 41= 15mm pushfit isolation valve 42= 22mm pushfit isolation valve DN19 bore diameter hose with the following end connections: 13= F3/4 14= F3/4 elbow 15= M3/4 16= F1 17= F1 elbow 18= M1 28= 22mm smooth tube 38= 22mm pushfit 42= 22mm pushfit isolation valve Sizes added July 2025: DN8 09= F1/2 10= F1/2 wing nut 29= 10mm compression fitting 30= 12mm compression fitting 32= 22mm compression fitting 33= 15mm isolation valve 34= 22mm isolation valve 36= 12mm pushfit 37= 15mm pushfit 40= 12mm pushfit isolation valve DN10 09= F1/2 10= F1/2 wing nut 30= 12mm compression fitting 32= 22mm compression fitting 33= 15mm isolation valve 34= 22mm isolation valve 36= 12mm pushfit 37= 15mm pushfit 40= 12mm pushfit isolation valve DN13 09= F1/2 10= F1/2 wing nut 32= 22mm compression fitting 33= 15mm isolation valve 34= 22mm isolation valve 37= 15mm pushfit Dn19 32 = 22mm Compression fitting 34 = 22mm isolation valve
Marking:: Justlink, WRAS, ‘it’ and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: JL – A*B – XX – D – Eit – XXX A*B denotes connection size and type and is replaced with a two digit number (please refer to size). XX denotes bore diameter of hose and is replaced with a two digit number (please refer to size). D denotes the outer braided material and is replaced with: SS = stainless steel wire, SN = stainless steel wire plus black nylon wire, N = Nylon wire. E denotes the liner material and is replaced with 1 for EPDM. XXX denotes the length of the hose between 15cm & 200cm and is replaced with a number.

Product Images

Approval Holder:: Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company

WRAS Approval Number: #2103354

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103354
Size:: DN8 (denoted by 08) bore diameter available with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter available with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter available with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring
Marking:: GENEBRE, date of manufacture (MMYY) GENEBRE label on the product.
Installation Requirements:: R001
Expiry date:: 31/03/2026
Model:: GEFLEX A*B XX D E XXX A*B denotes connection size and type and is replaced with a two digit number (please refer to size). XX denotes bore diameter of hose and is replaced with a two digit number (please refer to size). D denotes the outer braided material and is replaced with: SS = stainless steel wire, SN = stainless steel wire plus black nylon wire N = Nylon wire. E denotes the liner material and is replaced with 0 for EPDM. XXX denotes the length of the hose (15cm to 200cm) and is replaced with a number.

Approval Holder:: Genebre, S.A

Company Name
Genebre, S.A
Address
Poligono Industrial Pedrosa, Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat
Postcode
08908
Country
Spain
Phone
(+34) 93 298 80 00
General Email
cazorla@genebre.es

View All Listings by this Company

WRAS Approval Number: #250602048

Range of stainless steel braided EPDM lined flexible hose assemblies with EPDM seals & EPDM washers, available with a variety of end connections. For use with copper pipe manufactured to EN1057 & HEP20 PB pipe. Maximum working pressure; 6 Bar Maximum operating temperature; 65°c

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 250602048
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models below. PF = Pushfit
Marking:: On cap: Wavin, Hep20. Collor: BS7291, Size, and KEYLESS. On ferule: DOM (YYYY) GCE and WRAS
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: 3093476 KL425A-15 15mm PF X ½ BSP (F) 3093488 KL125A-15 15mm PF X ½ BSP (F) 3093567 KL125B-15 15mm PF X 3/4 BSP (F) 3093484 KL125C-22 22mm PF X ¾ BSP (F) 3093477 KL125B-22 22mm PF X ¾ BSP (F) 3093487 KL225A-15 15mm PF X ½ BSP (F) 3093478 KL225B-15 15mm PF X 3/4 BSP (F) 3093515 KL225C-22 22mm PF X ¾ BSP (F) 3093512 KL225B-22 22mm PF X ¾ BSP (F) 3093493 KL325A-15 15mm PF X ½ BSP (F) 3093583 KL325B-22 22mm PF X ¾ BSP (F) 3093586 KL125H-15 15mm PF 3093579 KL125H-22 22mm PF 3093601 KL225H-15 15mm PF 3093518 KL225H-22 22mm PF 3093593 KL125D-15 15mm PF X ½ BSP (F) 3093501 KL125F-15 15mm PF M10 threaded 3093496 KL125G-15 15mm PF M12 threaded

Manufacturer:: Wavin Ltd.

Company Name
Wavin Ltd.
Address
Edlington Lane, Edlington Doncaster
Postcode
DN12 1BY
Country
United Kingdom
Phone
01709 856300

View All Listings by this Company