Range of gate valves with blue epoxy coated ductile iron bodies and EPDM wedges. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

240402093

Size:

DN40, 50, 60, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 500, 600 flanged inlet and outlet.

Marking:

T.I.S, size, PN and product info on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

A20-29-PN10/16 Series 14/15 BS5163 type A/B

Approval Holder:

T.I.S Service SpA

Company Name

T.I.S Service SpA

Address

Via Lago d'Iseo 4/6 24060 Bolgare (Bergamo) Italy

View All Listings by this Company

Range of gate valves incorporating blue epoxy coated ductile iron bodies. EPDM coated ductile iron wedges and a non-rising spindle headwork. Some models incorporate a bypass. Maximum working pressure 16.0 bar. Maximum operating temperature 45°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

260188006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

AVK, PN and DN on both the body and label on body.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

2105035#140069 2108035#140069 2110035#140069 2115035#140069 2120035#140069 2125035#140069 2130035#140069 2135035#140069 2140035#140069 Where # is: 2 – Clockwise to close, fitted with BS 5163 stemcap (white insert) (All sizes) 3 - Clockwise to open, fitted with BS 5163 stemcap (red insert) (All sizes) G – Clockwise to close, fitted with BS 5163 stemcap (white insert), Bypass fitted (DN350+400 ONLY) H - Clockwise to open, fitted with BS 5163 stemcap (red insert), Bypass fitted (DN350+400 ONLY)

Approval Holder:

AVK UK Ltd.

Company Name

AVK UK Ltd.

Address

8 Rushmills, Northampton

Postcode

NN4 7YB

Country

United Kingdom

Phone

01246479100

General Email

chle@avkuk.co.uk

View All Listings by this Company

Manufacturer:

AVK UK Ltd.

Company Name

AVK UK Ltd.

Address

8 Rushmills, Northampton

Postcode

NN4 7YB

Country

United Kingdom

Phone

01246479100

General Email

chle@avkuk.co.uk

View All Listings by this Company

‘Safecure Super’. White coloured, spray applied SBR latex solution intended to act as a concrete curing membrane. Apply as per manufacturer`s 'Tech Data Sheet no. 306', 'Revision no. v4', dated '02.01.2026'. Cure for 14 days at 25°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5057 Concrete, Cement and Mortar

Section Subtitle:

Curing compounds.

WRAS Approval Number:

260155016

Expiry date:

31/01/2031

Approval Holder:

Adomast Manufacturing Ltd.

Company Name

Adomast Manufacturing Ltd.

Address

Units 1 & 2 Barkston Road, Carlton Industrial Estate, Barnsley

Postcode

S71 3HU

View All Listings by this Company

'PPE HY3140GYellow' & 'PPE HY3140GBlack'. Yellow or black coloured, injection moulded PPE materials. For use with water up to 85°C.

Section:

5253 Polyphenylene Ether (PPE)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

260155026

Expiry date:

31/01/2031

Approval Holder:

Hunan Henyl Advanced Materials Co., Ltd.

Company Name

Hunan Henyl Advanced Materials Co., Ltd.

Address

Xianghong Industrical Park, Xinhua Economic and Technological Development Zone, Loudi City, Hunan 417600

Country

China

View All Listings by this Company

'Smart S-IRV'. Site applied, grey coloured, two-part (resin & hardener is automatically mixed in a 10:1 volume ratio through dispensing nozzle) anchor resins. Apply and cure as per ’T Load’ cures set out in Table B3 of European Technical Assessment ‘ETA 14/0141’, dated ‘29/11/2023’. For use with water up to 23°C. If the cure conditions are varied from those specified in ’T Load’ cures set out in set out in Table B3 of European Technical Assessment ‘ETA 14/0104’ then the materials are not covered by the scope of the approval. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water.

Section:

5311 Resin Anchors

Expiry date:

30/06/2030

Approval Holder:

PGB-Polska

Company Name

PGB-Polska

Address

Ul. Fryderyka Wilhelma Redena 3, 41-807 Zabrze

Country

Poland

View All Listings by this Company