Directory Search Results

Print List

#2010564

‘Promag’. Factory applied coating system, black coloured, consisting of two component primer and three component polyurethane top coat. Mix primer in a ratio 2:1 by weight (component A:B), apply and cure for 2 hours at 23°C, then mix topcoat in a ratio 100:5.6:2.4 by weight (component A:B:C) before applying and curing for 20 seconds at 23°C. This approval covers the following manufacturing sites: France and China. For use with water up to 23°C.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2010564
Expiry date:
31/10/2025

Approval Holder:
Endress + Hauser Flowtec AG
Company Name
Endress + Hauser Flowtec AG
Address
Christoph Merian-Ring 4 Reinach
Postcode
CH-4153
Country
Switzerland
Phone
Tel: +41 61715 6752 Fax: +41 61711 0626
General Email
info.ch@endress.com

View All Listings by this Company

Print This Approval


#2103525

'Krystaline 1'. Grey coloured, site applied cement based coating, intended to be used to waterproof concrete. Mix coating with water in a volume ratio of 5:2. Apply to pre-wetted cement and allow to cure for 1 hour@5°C. Pre-wet the cement before applying a second coat and then dry cure for 2 hours@5°C before wet curing for 48 hours@5°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:
5055 Concrete, Cement and Mortar
Section Subtitle:
Waterproofers.
WRAS Approval Number:
2103525
Expiry date:
31/03/2026

Approval Holder:
Krystaline Technology S.A.
Company Name
Krystaline Technology S.A.
Address
C/ Nicolás de Bussi 52, Parque Empresarial, 03203 Elche (Alicante)
Country
Spain

View All Listings by this Company

Print This Approval


#2103543

'Crystal Concentrado'. Grey coloured, site applied cement based coating, intended to be used to waterproof concrete. Mix coating with water in a volume ratio of 5:2. Apply to pre-wetted cement and allow to cure for 1 hour@5°C. Pre-wet the cement before applying a second coat and then dry cure for 2 hours@5°C before wet curing for 48 hours@5°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:
5055 Concrete, Cement and Mortar
Section Subtitle:
Waterproofers.
WRAS Approval Number:
2103543
Expiry date:
31/03/2026

Approval Holder:
Uno Crystal Peru SAC
Company Name
Uno Crystal Peru SAC
Address
Mza. D Lote, 24 Programa de Vivienda (Villa de Oquendo, Primera Etapa), Callao
Country
Peru

View All Listings by this Company

Print This Approval


#2107550

`DR-PNL-WT Tank Panel`. Grey coloured GRP panel manufactured by hydraulic press moulding. For use with water up to 50°C.

Section:
5120 Glass Reinforced Plastics (GRP)
Section Subtitle:
Components.
WRAS Approval Number:
2107550
Expiry date:
31/07/2026

Approval Holder:
Doori Co. Ltd.
Company Name
Doori Co. Ltd.
Address
911-1 Geumbak-ro, Daechang-myeon, Yeongcheon
Country
Gyeongbuk,

View All Listings by this Company

Print This Approval


#2107561

`HYUNDAE Tank Panel`. Grey coloured GRP panel manufactured by hydraulic press moulding. For use with water up to 50°C.

Section:
5120 Glass Reinforced Plastics (GRP)
Section Subtitle:
Components.
WRAS Approval Number:
2107561
Expiry date:
31/07/2026

Approval Holder:
Doori Co. Ltd.
Company Name
Doori Co. Ltd.
Address
911-1 Geumbak-ro, Daechang-myeon, Yeongcheon
Country
Gyeongbuk,

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 26 of 202

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.