Directory Search Results

Fittings Materials
Print List

#2103559

'0713.17/55 (shore hardness 55) & 0713.17/70 (shore hardness 70)'. Black coloured, compression moulded EPDM rubber materials. Tested in-radii size 1.1mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2103559
Expiry date:
31/03/2026
Approval Holder:
Luebke & Vogt. GmbH & Co. KG
Company Name
Luebke & Vogt. GmbH & Co. KG
Address
Hustener Strasse 43 - 45, D - 59846 Sundern, Germany

View All Listings by this Company

Print This Approval

#2110525

'QC'. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2110525
Expiry date:
31/10/2026
Approval Holder:
Tianjin Qichang Valve Co. Ltd
Company Name
Tianjin Qichang Valve Co. Ltd
Address
16 Huoju Road Beizhakou Economic Development Zone Jinnan District
Country
Tianjin

View All Listings by this Company

Print This Approval

#2106549

'HYPRESS12V'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.1mm. Between June 2021 and August 2022, the material was for use with water up to 23°C. Between September 2022 and June 2026, the material is for use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106549
Expiry date:
30/06/2026
Approval Holder:
HYPRESS RUBBER MFG. CO.
Company Name
HYPRESS RUBBER MFG. CO.
Address
Gat no. 323, Plot No. 2, VILLAGE SHINDEWADI – SHIRWAL, TALUKA – KHANDALA DISTRICT – SATARA, PIN - 412801 MAHARASHTRA
Country
India

View All Listings by this Company

Print This Approval

#2103560

'EPDM BW 5920 D 50'. Black coloured, compression moulded EPDM material. Shore hardness 50. Tested in-radius size 1.0mm. For use with water up to 70°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2103560
Expiry date:
31/03/2026
Approval Holder:
Prabhat Elastomers Pvt. Ltd.
Company Name
Prabhat Elastomers Pvt. Ltd.
Address
'Prabhat Bhavan', 96 L.B.S. Marg, Vikhroli West, Mumbai, Maharashtra 400083
Country
India
Phone
+91 22 3294 6102
General Email
prabhatin@vsnl.com

View All Listings by this Company

Print This Approval

#2109552

'S/EP-50, S/EP-60, S/EP-70 & S/EP-80'. Black coloured, compression moulded EPDM materials with a shore hardness of between 50A & 80A. Tested in-radius size 1.05mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2109552
Expiry date:
30/09/2026
Approval Holder:
Waheguru Rubber Manufacturing Co. (P) Ltd
Company Name
Waheguru Rubber Manufacturing Co. (P) Ltd
Address
732/A, Delhi Road, Post Office - Belumilki, Dist. - Hooghly, West Bengal - 712223
Country
India

View All Listings by this Company

Print This Approval

#2106550

'ILPEA 70-90 EPDM COMPOUND WRAS AF'. Black coloured, compression moulded EPDM material. Shore hardness 80. Tested in-radius size 1.25mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106550
Expiry date:
30/06/2026
Approval Holder:
Industrie ILPEA spa
Company Name
Industrie ILPEA spa
Address
Viale Industrie, 887, 21020 Malgesso (VA)
Country
Italy

View All Listings by this Company

Print This Approval

#2108540

'EPDM-W E267'. Black coloured, compression moulded EPDM material. Shore hardness 80A. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2108540
Expiry date:
31/08/2026
Approval Holder:
Alfa Laval Lund AB
Company Name
Alfa Laval Lund AB
Address
PO Box 74, SE-22100, Lund
Country
Sweden

View All Listings by this Company

Print This Approval

#2102544

'Coru177'. Black coloured, compression moulded EPDM rubber. Shore hardness 70. Tested in-radius size 1.5mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2102544
Expiry date:
28/02/2026
Approval Holder:
Accrasystem Ltd. T/A Coruba
Company Name
Accrasystem Ltd. T/A Coruba
Address
Units 28-30 Purdeys Way, Rochford, Essex
Postcode
SS4 1ND

View All Listings by this Company

Print This Approval

#2102545

'SM177'. Black coloured, compression moulded EPDM rubber. Shore hardness 70. Tested in-radius size 1.5mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2102545
Expiry date:
28/02/2026
Approval Holder:
Accrasystem Ltd. T/A Metroseal
Company Name
Accrasystem Ltd. T/A Metroseal
Address
Unit 28-30 Purdeys Way, Rochford, Essex
Postcode
SS4 1ND

View All Listings by this Company

Print This Approval

#2111513

'Hongli IRHD50'. Black coloured, press moulded EPDM material. Shore hardness 50. Tested in-radius size 1.12mm. For use with water up to 50°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2111513
Expiry date:
30/11/2026
Approval Holder:
Maanshan Hongli Rubber Products Co., Ltd.
Company Name
Maanshan Hongli Rubber Products Co., Ltd.
Address
No. 226 Xinhua Road, HuaShan Area, Maanshan City, Anhui Province
Country
China

View All Listings by this Company

Print This Approval

#2111516

'A-KT 70-00'. Black coloured, extruded and rotocured EPDM rubber material. Shore hardness 70. Tested in-radius size 1.00mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2111516
Expiry date:
30/11/2026
Approval Holder:
Holcim Technical Solutions and Products GmbH
Company Name
Holcim Technical Solutions and Products GmbH
Address
Fred-Joachim-Schoeps-Str. 55, 68535 Edingen-Neckarhausen, Germany

View All Listings by this Company

Print This Approval

#2112507

'Sunaflex T 8289'. Black coloured, compression moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2112507
Expiry date:
31/12/2026
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2110541

'LC 50-90'. Black coloured, compression moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.33mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2110541
Expiry date:
31/10/2026
Approval Holder:
Comet Srl
Company Name
Comet Srl
Address
Via Fogliano, Trav I, 12, 25030 Coccaglio (BS)
Country
Italy
Phone
+39 035 933535
General Email
comet@cometsre.com

View All Listings by this Company

Print This Approval

#2111525

'Sunaflex T 8157'. Black coloured, compression moulded EPDM rubber material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2111525
Expiry date:
30/11/2026
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2204501

'EP50, EP55, EP60, EP65, EP70, EP75 & EP80'. Black coloured, transfer moulded EPDM material. Shore hardness between 50 & 80. Tested in-radius size 1.1mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204501
Expiry date:
30/04/2027
Approval Holder:
VIP Polymers Ltd.
Company Name
VIP Polymers Ltd.
Address
15 Windover Road, Huntingdon, Cambridgeshire
Postcode
PE29 7EB
Phone
01480 411 333
General Email
info@vip-polymers.com

View All Listings by this Company

Print This Approval

#2110545

'Athena-EPDM-XX70'. Black coloured, compression moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.33mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2110545
Expiry date:
31/10/2026
Approval Holder:
Athena SpA
Company Name
Athena SpA
Address
Via delle Albere 13, 36045 Alonte (Vicenza)
Country
Italy

View All Listings by this Company

Print This Approval

#2110547

'AS-IS'. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2110547
Expiry date:
31/10/2026
Approval Holder:
Die Erste Industry Co., Ltd.
Company Name
Die Erste Industry Co., Ltd.
Address
1F, Building 5m No. 58 Xutang Road, Songjiang District, Shanghai
Country
China

View All Listings by this Company

Print This Approval

#2112518

'EPDM60BKFG, EPDM65BKFG, EPDM70BKFG, EPDM75BKFG & EPDM80BKFG'. Black coloured, compression moulded EPDM rubbers. Shore hardness between 60A & 80A. Tested in-radius size 1.0mm. For use with water up to 70°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2112518
Expiry date:
31/12/2026
Approval Holder:
Kesaria Rubber Industries Pvt. Ltd.
Company Name
Kesaria Rubber Industries Pvt. Ltd.
Address
Binola Industrial Area, VPO Bhoda Kalan, 57/58 KM Stone, NH-8, Gurgaon, 122413, Haryana
Country
India

View All Listings by this Company

Print This Approval

#2201521

0713.23/60 (shore hardness 60A). 0713.23/65 (shore hardness 65A). 0713.23/70 (shore hardness 70A). 0713.23/75 (shore hardness 75A). 0713.23/80 (shore hardness 80A). 0713.23/85 (shore hardness 85A). Black coloured, compression moulded EPDM rubber materials. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2201521
Expiry date:
31/01/2027
Approval Holder:
Luebke & Vogt. GmbH & Co. KG
Company Name
Luebke & Vogt. GmbH & Co. KG
Address
Hustener Strasse 43 - 45, D - 59846 Sundern, Germany

View All Listings by this Company

Print This Approval

#2201525

'E2532'. Black coloured, compression moulded EPDM material. Shore hardness 55. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2201525
Expiry date:
31/01/2027
Approval Holder:
Semperit Technische Produkte GmbH
Company Name
Semperit Technische Produkte GmbH
Address
Bundesstrasse 26, 2632 Wimpassing
Country
Austria
Phone
+43 2630 310 0 Fax: +43 2630 475
General Email
office@semperit.at

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 26 of 112

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.