Range of single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies, various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Depending on model the products are supplied with either a stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection or 10mm copper tail (see models). Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

250502024

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The products are not supplied with anything to connect between the solenoid valves (15mm compression) and the copper tails (10mm spigot) or the braided hose (15mm spigot), this must be sourced by the installer. R007 applies only to models that are supplied with PEX lined connecting hose assemblies.

Size:

15mm compression

Marking:

DVS logo on body

Installation Requirements:

R001 R006 R007 R010

Expiry date:

31/05/2030

Model:

Aquarius A32: AT03-001 (Stainless steel and braided hose) AT03-002 (Stainless steel and copper tails) AT03-003 (Polished stainless steel and braided hose) AT03-004 (Polished stainless steel and copper tails) Aquarius A45: AT03-011 (Stainless steel and braided hose) AT03-012 (Stainless steel and copper tails) AT03-013 (Polished stainless steel and braided hose) AT03-014 (Polished stainless steel and copper tails) Aquarius A45 Doc M: AT03-021 (Stainless steel and braided hose) AT03-022 (Stainless steel and copper tails) AT03-023 (Polished stainless steel and braided hose) AT03-024 (Polished stainless steel and copper tails) Aquarius Short Neck: AT03-031 (Stainless steel and braided hose) AT03-032 (Stainless steel and copper tails) AT03-033 (Polished stainless steel and braided hose) AT03-034 (Polished stainless steel and copper tails) Aquarius High Neck: AT03-041 (Stainless steel and braided hose) AT03-043 (Polished stainless steel and braided hose) Aquarius Pillar Tap: AT03-051 (Chrome and braided hose) AT03-061 (Chrome and braided hose)

Approval Holder:

KWC DVS Ltd.

Company Name

KWC DVS Ltd.

Address

Kemmings Close, Long Road, Paignton, Devon

Postcode

TQ4 7TW

Country

United Kingdom

Phone

01246 458 900

General Email

richard.lamb@kwc.com

View All Listings by this Company

Manufacturer:

KWC DVS Ltd.

Company Name

KWC DVS Ltd.

Address

Kemmings Close, Long Road, Paignton, Devon

Postcode

TQ4 7TW

Country

United Kingdom

Phone

01246 458 900

General Email

richard.lamb@kwc.com

View All Listings by this Company

Floor standing single hole, single outlet (fixed) combination tap assembly (chrome plated brass) body, incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3). The outlet to the shower incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C

Section:

0466 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)

WRAS Approval Number:

250502037

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F)

Marking:

SONAS on operating member

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2030

Model:

UBR0146 (in Chrome) UBR0147 (in Matt Black) UBR0148 (in Brushed Nickel) UBR0149 (in Brushed Gold)

Approval Holder:

Sonas Bathrooms

Company Name

Sonas Bathrooms

Address

103 Northwest Business Park Ballycoolin, Dublin 15

Postcode

D15 R88

Country

Ireland

View All Listings by this Company

Range of shower kits with a shower hose, handset and shower rail. Maximum operating temperature 60 °C. Open outlet use only.

Section:

1670 Shower Outlets

Section Subtitle:

Shower kit(s)

WRAS Approval Number:

250512003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F)

Marking:

Sonas on body

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2030

Model:

USH0213 USH0214 USH0215 Model added August 2025: USH0233 (Brushed Gold)

Approval Holder:

Sonas Bathrooms

Company Name

Sonas Bathrooms

Address

103 Northwest Business Park Ballycoolin, Dublin 15

Postcode

D15 R88

Country

Ireland

View All Listings by this Company

Manufacturer:

Sonas Bathrooms

Company Name

Sonas Bathrooms

Address

103 Northwest Business Park Ballycoolin, Dublin 15

Postcode

D15 R88

Country

Ireland

View All Listings by this Company

Range of hand showers and shower arm kits with (brass bodies - various finishes. The inlets of the hand showers and the inlet elbows incorporate approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. Open outlet use only. Maximum operating temperature 65°C.

Section:

1670 Shower Outlets

Section Subtitle:

Shower kit(s)

WRAS Approval Number:

250602017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2" BSP female (with a ½” BSPP male adaptor for international use) for hand showers. 1/2" NPT male for shower arm.

Marking:

Waterworks logo on handset (BHS010, HNHS010 & CNHS10) Waterworks on escutcheon (BHS010 & BSH001CO)

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

Hand Showers: BHS010XZZ BHS010ZZ HNHS010ZZ CNHS10ZZ Shower Arm: BSH001XZZ Where XX denotes the finish and can be replaced by: AC = Antique Copper AB = Architectural Bronze AQB = Antique Brass BZ = Architectural Bronze C = Polished Chrome CO = Concordia DN = Dark Nickel G = Gold L = Lumin M = Matte Nickel MC = Matte Chrome MG = Matte Gold MS = Matte Silver N = Polished Nickel S = Silver SC = Shiny Copper SO = Sovereign UB = Unlacquered Brass Where XX denotes the handle components and can be replaced by: 0 = Less Handles 1 = Cross Handle 2 = Two‐Tone Cross Handle 3 = Coin Edge Cross Handle 10 = Solo Series Lever Handle 11 = Lever Handle 12 = Two‐Tone Lever Handle 13 = Coin Edge Lever Handle 14 = Walnut Lever Handle 15 = Leather Lever Handle 20 = Solo Series Straight Lever Handle 2A = Tandem Series Guilloche Lines Lever Handle 2B = Tandem Series Two‐Tone Lever Handle 2C = Union Series Guilloche Link Lever Handle 2D = Union Series Enamel Guilloche Lines Lever Handle 2E = Union Series Guilloche Pinstripe Lever Handle 2P = Solo Series Two‐Piece Straight Lever Handle 2S = Bond Rally Series Lever Handle 2T = Teak Lever Handle 30 = Solo Series Knob Handle 3S = Bond Rally Series Knob Handle 4A = Tandem Series Guilloche Lines Knob Handle 4B = Tandem Series Two‐Tone Guilloche Knob Handle 4D = Union Series Enamel Guilloche Lines Knob Handle 5C = Union Series Guilloche Link Knob Handle 7A = Tandem Series Guiloche Lines Lever handles with Gland Cover 7B = Tandem Series Two Tone Lever handles with Gland Cover 7C = Union Series Guiloche Link Lever handles with Gland Cover 7D = Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E = Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P = Solo Series Two Piece Straight Lever handle with Gland Cover 7S = Bond Rally Series Lever Handle With Gland Cover 7T = Tandem Series Teak lever with Gland Cover 8Z = Straight Lever Handle 90 = Solo Series Straight Lever handles with Gland Cover

Approval Holder:

Waterworks

Company Name

Waterworks

Address

60 Backus Ave, Danbury, CT 06810

Country

USA

Phone

(203) 546 6140

View All Listings by this Company

Range of one piece (black) plastic storage cisterns supplied with a screened vent. Cold water use only.

Section:

0120 Cisterns Storing Water for Domestic Purposes

Section Subtitle:

Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.

WRAS Approval Number:

250604716

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Harlequin, model and product information on adhesive label on body.

Installation Requirements:

R001 R270 R350

Expiry date:

30/06/2030

Model:

PW920SL – 920 litre slimline. PW1100SL – 1100 litre slimline. PW1200LP – 1200 litre low profile. PW1400VT – 1400 litre vertical. PW1800VT – 1800 litre vertical, PW2700VT – 2700 litre vertical. PW3800VT – 3800 litre vertical. PW5700VT – 5700 litre vertical. PW7500VT – 7500 litre vertical. PW9250VT – 9250 litre vertical.

Approval Holder:

Harlequin Manufacturing Limited

Company Name

Harlequin Manufacturing Limited

Address

21 Clarehill Road, Moira, Co Armagh, N. Ireland

Postcode

BT67 0PB

Phone

02892 611 077

General Email

info@harlequin-mfg.com

View All Listings by this Company