Range of plastic and DZR brass pushfit fittings for use with PE-x pipe (manufactured to BS7291-3), PB pipe (manufactured to BS7291-2) and copper pipes (manufactured to EN 1057). Maximum working pressure 10.0 bar, except tank connectors which are open outlet use only. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251015003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

R008 applies to the ATC tank connectors.

Size:

See model.

Marking:

Twistloc company logo (‘TLC’) and size either on body and/or collet.

Installation Requirements:

R001 R008

Expiry date:

31/10/2030

Model:

Plastic Fittings: SMF6741M-2P - 2 Ports Manifold 22mm pushfit x 10mm pushfit x 10mm pushfit. SMF6746M-2P - 2 Ports Manifold 22mm pushfit x 15mm pushfit x 15mm pushfit. SMF6741M-4P - 4 Ports Manifold 22mm pushfit x 10mm pushfit x 10mm pushfit x 10mm pushfit. ATC44M - Tank connector 22mm pushfit x ¾" BSP (M). ATC66M - Tank connector 15mm pushfit x ½” BSP (M). ATC00M - Tank connector 28mm pushfit x 1” BSP (M). ATC44MBK - Tank connector 22mm pushfit x ¾" BSP (M). ATC66MBK - Tank connector 15mm pushfit x ½” BSP (M). ATC00MBK - Tank connector 28mm pushfit x 1” BSP (M). DZR Brass Fittings: SBFCA6741M - Cylinder Adaptor 22mm pushfit x 1" BSP (F). SBFA6764M - Female Coupler 15mm pushfit x ½" BSP (F). SBFA6765M - Female Coupler 15mm pushfit x ¾" BSP (F). SBFA6745M - Female Coupler 22mm pushfit x ¾" BSP (F). SBMCC6741M - Cylinder Adaptor 22mm pushfit x 1" BSP (M). SBMC6714M - Male Coupler 10mm pushfit x ½" BSP (M). SBMC6764M - Male Coupler 15mm pushfit x ½" BSP (M). SBMC6745M - Male Coupler 22mm pushfit x ¾" BSP (M). SBBPE6764M - Back Plate Elbow 15mm pushfit x ½" BSP (F). SBMSA6764M - Male Stem Adaptor 15mm x ½" BSP (M). SBMSA6745M - Male Stem Adaptor 22mm x ¾" BSP (M). SBMSA6701M - Male Stem Adaptor 28mm x 1" BSP (M). SBFSA6764M - Female Stem Adaptor 15mm x ½" BSP (F). SBFSA6745M - Female Stem Adaptor 22mm x ¾” BSP (F).

Product Images

Approval Holder:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company

'Flomasta' range of push-fit fittings with PEX-b, polysulphone or PPE bodies, supplied with polysulphone inserts. For use with PEX pipe (manufactured to BSEN 7291 part 3), PB (manufactured to BSEN 7291 part 2) and copper pipe (EN1057). Maximum working pressure/temperature: 12.5 Bar @ 20°C. As of October 2025: Maximum working pressure/temperature 3 Bar @ 92°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250602054

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

10mm, 15mm, 22mm, 28mm

Marking:

TLC (TwistLoc logo) and size on body

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

‘Flomasta’ range comprising of models: SRDE6764M 15mmX1/2"BSP DROP EAR ELBOW SRF6764M 15mmX1/2"BSP FEMALE ADAPTOR SRF6765M 15mmX3/4"BSP FEMALE ADAPTOR SRF6745M 22mmX3/4"BSP FEMALE ADAPTOR SRF6701M 28mmX1"BSP FEMALE ADAPTOR SPU6711M 10mm STR UNION SPU6766M 15mm STR UNION SPU6744M 22mm STR UNION SPU6700M 28mm STR UNION SPU6761M 15mmX10mm REDUCING STR UNION SPU6746M 22mmX15mm REDUCING STR UNION SRSE6714M 10mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6764M 15mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6765M 15mmX3/4"BSP SWIVEL ELBOW (Hand Tighten) SRSE6714BM 10mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6764BM 15mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6765BM 15mmX3/4"BSP SWIVEL ELBOW (Brass Nut) SPSU6714M 10mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6764M 15mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6765M 15mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6745M 22mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6714BM 10mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6764BM 15mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6765BM 15mmX3/4"BSP SWIVEL UNION (Brass Nut) SPSU6745BM 22mmX3/4"BSP SWIVEL UNION (Brass Nut) SPST671M 10mm END STOP SPST676M 15mm END STOP SPST674M 22mm END STOP SRST670M 28mm END STOP SPE6711M 10mm ELBOW SPE6766M 15mm ELBOW SPE6744M 22mm ELBOW SPE6700M 28mm ELBOW SPE6761M 15mmX10mm REDUCING ELBOW SPE6746M 22mmX15mm REDUCING ELBOW SPATE6766M 15mm-135o STEM ELBOW SPATE6744M 22mm-135o STEM ELBOW SPR6716M 10mmX15mm REDUCER SPR6764M 15mmX22mm REDUCER SPR6760M 15mmX28mm REDUCER SPR6740M 22mmX28mm REDUCER SPT67111M 10mm TEE SPT67666M 15mm TEE SPT67444M 22mm TEE SPT67000M 28mm TEE SPT67611M 15mmX10mmX10mm REDUCING TEE SPT67661M 15mmX15mmX10mm REDUCING TEE SPT67664M 15mmX15mmX22mm REDUCING TEE SPT67466M 22mmX15mmX15mm REDUCING TEE SPT67464M 22mmx15mmx22mm REDUCING TEE SPT67441M 22mmx22mmx10mm REDUCING TEE SPT67446M 22mmX22mmX15mm REDUCING TEE SPT67044M 28mmX22mmX22mm REDUCING TEE SPT67040M 28mmX22mmX28mm REDUCING TEE SPT67001M 28mmX28mmX10mm REDUCING TEE SPT67006M 28mmX28mmX15mm REDUCING TEE SPT67004M 28mmX28mmX22mm REDUCING TEE SPTT67441M 22mX22mmX10mm TUBE TEE SPTT67446M 22mX22mmX15mm TUBE TEE SPTE6711M 10mm TUBE ELBOW SPTE6716M 10mmx15mm TUBE ELBOW SPTE6766M 15mm TUBE ELBOW SPTE6744M 22mm TUBE ELBOW SRMC6764M 15mmX1/2"BSPT MALE CONNECTOR SRME6764M 15mmX1/2"BSPT MALE ELBOW SRFWC6741M 22mmX10mm 4WAY MANIFOLD SRU6766SM 15mm SLIP UNION SRU6744SM 22mm SLIP UNION STS10M 10mm PIPE INSERT STS15M 15mm PIPE INSERT STS22M 22mm PIPE INSERT STS28M 28mm PIPE INSERT SRAV63M 15mm AIR-VENT CONNECTOR

Approval Holder:

Kingfisher International Products B.V

Company Name

Kingfisher International Products B.V

Address

Rapenburgerstraat 175E, 1011 VM Amsterdam

Country

Netherlands

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

View All Listings by this Company

Range of brass press fittings with EPDM ‘O’-rings for use with copper pipe (manufactured to EN1057). Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251115005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Taizhou Double Winners Copper Co., Ltd logo (dbw in a box) and size on body.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

6243G Coupler Male: 15x1/2", 15x3/4", 22x1/2", 22x3/4", 22x1", 28x3/4", 28x1", 35x1", 35x11/4", 42x11/2", 54x2". 6270G Coupler Female: 15x1/2", 15x3/4", 22x1/2", 22x3/4", 22x1", 28x3/4", 28x1", 35x1", 35x11/4", 42x11/2", 54x2". 6359G Straight Swivel: 15x1/2", 15x3/4", 22x1/2", 22x3/4", 22x1", 28x1", 28x11/4". 6092G Male Elbow: 15x1/2", 15x3/4", 22x3/4", 22x1", 28x1". 6090G Female Elbow: 15x1/2", 15X3/4", 22x3/4", 22x1", 28x1". 6472G Female Wallplate Elbow: 15x1/2", 22x3/4". 6130G Branch Tee (left x right x middle): 15x15x1/2", 22x22x1/2", 22x22x3/4", 28x28x1/2", 28x28x3/4", 28x28x1", 35x35x1/2", 35x35x3/4", 35x35x1", 42x42x1/2", 54x54x1/2". 6246G Female Adaptor: 1/2"x15, 3/4"x22. 6361G Male Union: 15x1/2", 22x3/4", 28x1". 6330G Female Union: 15x1/2", 22x3/4", 28x1".

Product Images

Approval Holder:

Taizhou Double Winners Copper Co., Ltd

Company Name

Taizhou Double Winners Copper Co., Ltd

Address

#2‐902, Z Center, No. 185 Wenxue Road, Jiaojiang, Taizhou, 31800, Zhejiang, China

View All Listings by this Company

“>B<Press NZ” range of press fittings incorporating copper (EN12165 CW024A) or copper alloy (CC499K-DW) bodies. For use with copper tube (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251108015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

>B< (Conex logo) & size on body.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

Copper alloy bodies: PIR4090G; - Threaded Elbow PIR4090G040400 – ½” x ½” BSP (F), PIR4090G060600 – ¾” x ¾” BSP (F). PIR4092G; - Press Elbow PIR4092G040400 – ½” x ½”, PIR4092G060600 – ¾” x ¾”. PIR4243G; - Male Adaptor PIR4243G040400 – ½” x ½” BSP (M), PIR4243G040600 – ½” x ¾” BSP (M), PIR4243G060400 – ¾” x ½” BSP (M), PIR4243G060600 – ¾” x ¾” BSP (M), PIR4243G080600 – 1” x ¾” BSP (M), PIR4243G080800 – 1” x 1” BSP (M). PIR4471G; - Female Wallplate Elbow PIR4471G040400 – ½” x ½” BSP (F), PIR4471G060600 – ¾” – ¾” BSP (F). PIR4473G; - Male Wall plate Elbow PIR4473G040400 – ½” BSP (M). PIR4270G; - Female Adaptor PIR4270G040400 – ½” x ½” BSP (M), PIR4270G060600 – ¾” x ¾” BSP (M), PIR4270G080800 – 1” x 1” BSP (M). Copper bodies: PIR5040; - 45° Street Elbow PIR5040 040000 – ½”, PIR5040 060000 – ¾”, PIR5040 080000 – 1”. PIR5001; - 90° Street Bend PIR5001 040000 – ½”, PIR5001 060000 – ¾”, PIR5001 080000 – 1”. PIR5240; - Reducing Coupler PIR5240 060400 – ¾” x ½”, PIR5240 080400 – 1” x ½”, PIR5240 080600 – 1” x ¾”. PIR5130; - Tee Reduced PIR5130 060604 – ¾” x ¾” x ½”. PIR5002; - 90° Bend PIR5002 040000 – ½”, PIR5002 060000 – ¾”, PIR5002 080000 – 1”. PIR5041; - 45° Elbow PIR5041 040000 – ½”, PIR5041 060000 – ¾”, PIR5041 080000 – 1”. PIR5130; - Equal Tee PIR5130 040000 – ½”, PIR5130 060000 – ¾”, PIR5130 080000 – 1”. PIR5270; - Coupler PIR5270 040000 – ½” PIR5270 060000 – ¾” PIR5270 080000 – 1” PIR5301; – Stop End PIR5301 040000 – ½”, PIR5301 060000 – ¾”, PIR5301 080000 – 1”. PIR5130RB; - Tee Reduced Branch PIR5130 060406 – ¾” x ½” x ¾” PIR5130 080408 – 1” x ½” x 1” PIR5130 080608 – 1” x ¾” x 1” PIR5275; - Slip Coupler PIR5275 040000 – ½” PIR5275 060000 – ¾” PIR5275 080000 – 1” PIR5243; - Fitting Reducer PIR5243 060400 – ¾” x ½”, PIR5243 080400 – 1” x ½”, PIR5243 080600 – 1” x ¾”. PIR5130REB - Tee Reduced End & Branch PIR5130 060404 – ¾” x ½” x ½”, PIR5130 080806 – 1” X 1” X ¾”, PIR5130 040604 – ½” X ¾” X ½”, PIR5130 060806 – ¾“ X 1” X ¾”, PIR5130 040804 – ½” X 1” X ½”, PIR5130 080404 – 1” X ½” X ½”, PIR5130 080604 – 1” X ¾” X ½”, PIR5130 080406 – 1” X ½” X ¾”.

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

IBP Atcosa S.L & IBP Instalfittings Sp z o.o.,

Company Name

IBP Atcosa S.L & IBP Instalfittings Sp z o.o.,

Address

IBP Atcosa S.L - Polígono Industrial Quintos-Aeropuerto, 14005 Córdoba Spain & IBP Instalfittings Sp z o.o., - ul. Stanisława Zwierzchowskiego 29, 61-249 Poznań, Poland

General Email

View All Listings by this Company

Range of copper press fittings (‘M’ type crimp profile) and brass threaded adaptor fittings, for use with copper pipe (manufactured to EN1057). Maximum working pressure and operating temperatures: 16.0 bar @ 30°C and 10.0 bar @ 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240904040

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm - 54mm, ½” - 2” BSP. Sizes added December 2024: 66.7mm - 108mm. 2½” - 4” BSP.

Marking:

"CORE" and size, EN1253 & batch number on fitting.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Copper Coupler: CCP1015 - 15mm x 15mm, CCP1022 - 22mm x 22mm, CCP1028 - 28mm x 28mm, CCP1035 - 35mm x 35mm, CCP1042 - 42mm x 42mm, CCP1054 - 54mm x 54mm, CCP1067 - 66.7mm x 66.7mm, CCP1076 - 76.1mm x 76.1mm, CCP1108 - 108mm x 108mm. Copper Elbow: CCP12015 - 15mm x 15mm, CCP12022 - 22mm x 22mm, CCP12028 - 28mm x 28mm, CCP12035 - 35mm x 35mm, CCP12042 - 42mm x 42mm, CCP12054 - 54mm x 54mm, CCP12067 - 66.7mm x 66.7mm, CCP12076 - 76.1mm x 76.1mm, CCP12108 - 108mm x 108mm. Copper 90 Degree Street Elbow: CCP12S015 - 15mm x 15mm, CCP12S022 - 22mm x 22mm, CCP12S028 - 28mm x 28mm, CCP12S035 - 35mm x 35mm, CCP12S042 - 42mm x 42mm, CCP12S054 - 54mm x 54mm, CCP12S067 - 66.7mm x 66.7mm, CCP12S076 - 76.1mm x 76.1mm, CCP12S108 - 108mm x 108mm. Copper 45 Degree Elbow: CCP21015 - 15mm x 15mm, CCP21022 - 22mm x 22mm, CCP21028 - 28mm x 28mm, CCP21035 - 35mm x 35mm, CCP21042 - 42mm x 42mm, CCP21054 - 54mm x 54mm, CCP21067 - 66.7mm x 66.7mm, CCP21076 - 76.1mm x 76.1mm, CCP21108 - 108mm x 108mm. Copper 45 Degree Street Elbow: CCP21S015 - 15mm x 15mm, CCP21S022 - 22mm x 22mm, CCP21S028 - 28mm x 28mm, CCP21S035 - 35mm x 35mm, CCP21S042 - 42mm x 42mm, CCP21S054 - 54mm x 54mm, CCP21S067 - 66.7mm x 66.7mm, CCP21S076 - 76.1mm x 76.1mm, CCP21S108 - 108mm x 108mm. Copper Fitting Reducer: CCP6022015 - 22mm x 15mm, CCP6028015 - 28mm x 15mm, CCP6028022 - 28mm x 22mm, CCP6035022 - 35mm x 22mm, CCP6035028 - 35mm x 28mm, CCP60042022 - 42mm x 22mm, CCP6042028 - 42mm x 28mm, CCP6042035 - 42mm x 35mm, CCP6054028 - 54mm x 28mm, CCP6054035 - 54mm x 35mm, CCP6054042 - 54mm x 42mm, CCP6067028 - 66.7mm x 28mm, CCP6067035 - 66.7mm x 35mm, CCP6067042 - 66.7mm x 42mm, CCP6067054 - 66.7mm x 54mm, CCP6076035 - 76.1mm x 35mm, CCP6076042 - 76.1mm x 42mm, CCP6076054 - 76.1mm x 54mm, CCP6076067 - 76.1mm x 66.7mm, CCP6108042 - 108mm x 42mm, CCP6108054 - 108mm x 54mm, CCP6108067- 108mm x 66.7mm, CCP6108076 - 108mm x 76.1mm. Copper Equal Tee: CCP24015 - 15mm x 15mm x 15mm, CCP24022 - 22mm x 22mm x 22mm, CCP24028 - 28mm x 28mm x 28mm, CCP24035 - 35mm x 35mm x 35mm, CCP24042 - 42mm x 42mm x 42mm, CCP24054 - 54mm x 54mm x 54mm, CCP24067 - 66.7mm x 66.7mm x 66.7mm, CCP24076 - 76.1mm x 76.1mm x 76.1mm, CCP24108 - 108mm x 108mm x 108mm. Copper Reducer Tee: CCP28015015022 - 15mm x 15mm x 22mm, CCP27022015015 - 22mm x 15mm x 15mm, CCP26022015022 - 22mm x 15mm x 22mm, CCP25022015 - 22mm x 22mm x 15mm, CCP28022022028 - 22mm x 22mm x 28mm, CCP26028015028 - 28mm x 15mm x 28mm, CCP27028022015- 28mm x 22mm x 15mm, CCP27028022022 - 28mm x 22mm x 22mm, CCP26028022028 - 28mm x 22mm x 28mm, CCP25028015- 28mm x 28mm x 15mm, CCP25028022 - 28mm x 28mm x 22mm, CCP28028028035 - 28mm x 28mm x 35mm, CCP27035022022 - 35mm x 22mm x 22mm, CCP26035022035 - 35mm x 22mm x 35mm, CCP27035028022 - 35mm x 28mm x 22mm, CCP27035028028 - 35mm x 28mm x 28mm, CCP26035028035 - 35mm x 28mm x 35mm, CCP25035015 - 35mm x 35mm x 15mm, CCP25035022 - 35mm x 35mm x 22mm, CCP25035028 - 35mm x 35mm x 28mm, CCP27042035035 - 42mm x 35mm x 35mm, CCP25042015 - 42mm x 42mm x 15mm, CCP25042022- 42mm x 42mm x 22mm, CCP25042028 - 42mm x 42mm x 28mm, CCP25042035 - 42mm x 42mm x 35mm, CCP25054022 - 54mm x 54mm x 22mm, CCP25054028 - 54mm x 54mm x 28mm, CCP25054035 - 54mm x 54mm x 35mm, CCP25054042 - 54mm x 54mm x 42mm. Reducer Tee: CCP25067028- 66.7mm x 66.7mm x 28mm, CCP25067035 - 66.7mm x 66.7mm x 35mm, CCP25067042 - 66.7mm x 66.7mm x 42mm, CCP25067054 - 66.7mm x 66.7mm x 54mm, CCP25076022 - 76.1mm x 76.1mm x 22mm, CCP25076028 - 76.1mm x 76.1mm x 28mm, CCP25076035 - 76.1mm x 76.1mm x 35mm, CCP25076042 - 76.1mm x 76.1mm x 42mm, CCP25076054 - 76.1mm x 76.1mm x 54mm, CCP250108054 - 108mm x 108mm x 54mm, CCP250108067 - 108mm x 108mm x 66.7mm, CCP250108076 - 108mm x 108mm x 76.1mm. Copper End Cap: CCP61015 - 15mm, CCP61022 - 22mm, CCP61028 - 28mm, CCP61035 - 35mm, CCP61042 - 42mm, CCP61054 - 54mm, CCP61067 - 66.7mm, CCP61076 - 76.1mm, CCP61108 - 108mm. Copper Slip Coupler: CCP1S015 - 15mm x 15mm, CCP1S022 - 22mm x 22mm, CCP1S028 - 28mm x 28mm, CCP1S035 - 35mm x 35mm, CCP1S042 - 42mm x 42mm, CCP1S054 - 54mm x 54mm, CCP1S067 - 66.7mm x 66.7mm, CCP1S076 - 76.1mm x 76.1mm, CCP1S108 - 108mm x 108mm. Brass Male Adaptor: CCP3015 - 15mm x 1/2", CCP3015020 - 15mm x 3/4", CCP3022- 22mm x 1/2", CCP3022015 - 22mm x 3/4", CCP3022025 - 22mm x 1", CCP3028 - 28mm x 1", CCP3035 - 35mm x 1.1/4", CCP3042 - 42mm x 1.1/2", CCP3054- 54mm x 2", CCP3067 - 66.7mm x 2.1/2", CCP3076065 - 76.1mm x 2.1/2", CCP3076 - 76.1mm x 3", CCP3108 - 108mm x 4". Brass Female Adaptor: CCP2015 - 15mm x 1/2", CCP2022015 - 22mm x 1/2", CCP2022 - 22mm x 3/4", CCP2028 - 28mm x 1", CCP2035 - 35mm x 1.1/4", CCP2042 - 42mm x 1.1/2", CCP2054 - 54mm x 2", CCP2076065 - 76.1mm x 2.1/2", Brass Female Tee: CCP30015 - 15mm x 15mm x 1/2", CCP30022015 - 22mm x 22mm x 1/2", CCP30022020 - 22mm x 22mm x 3/4", CCP30028015 - 28mm x 28mm x 1/2", CCP30028020 - 28mm x 28mm x 3/4", CCP30035015 - 35mm x 35mm x 1/2", CCP30042015 - 42mm x 42mm x 1/2", CCP30054015- 54mm x 54mm x 1/2", CCP30076015 - 76.1mm x 76.1mm x 1/2", CCP30076020 - 76.1mm x 76.1mm x 3/4". Brass Straight Swivel Connector: CCP68015 - 15mm x 3/4", CCP68022025 - 22mm x 1", CCP68022 - 22mm x 3/4", Brass Male Elbow: CCP13015- 15mm x 1/2", CCP13022 - 22mm x 3/4", CCP13028 - 28mm x 1", CCP13035 - 35mm x 1.1/4", CCP13042 - 42mm x 1.1/2", CCP13054 - 54mm x 2", CCP14015- 15mm x 1/2", CCP14022 - 22mm x 3/4", CCP14028 - 28mm x 1", CCP14035 - 35mm x 1.1/4", CCP14042 - 42mm x 1.1/2", CCP14054 - 54mm x 2", CCP15015 - 15mm x 1/2", Brass Union Coupler: CCP11015 - 15mm, CCP11022 - 22mm, CCP11028 - 28mm, CCP11035 - 35mm, CCP11042 - 42mm, CCP11054 - 54mm. Male Insert Adaptor: CCP8015 - 15mm x 1/2", CCP022- 22mm x 3/4", CCP028 - 28mm x 1", CCP035 - 35mm x 1.1/4", CCP8042 - 42mm x 1.1/2", CCP8054 - 54mm x 2". Female Insert Adaptor: CCP7015- 15mm x 1/2", CCP7022 - 22mm x 1/2", CCP7022015 - 22mm x 3/4", CCP7028 - 28mm x 1", CCP7035 - 35mm x 1.1/4", CCP7042 - 42mm x 1.1/2", CCP7054 - 54mm x 2". Brass Male Union: CCP69015 - 15mm x 1/2", CCP69022 - 22mm x 3/4", CCP69028 - 28mm x 1", CCP69035 - 35mm x 1.1/4", CCP69042 - 42mm x 1.1/2", CCP69054 - 54mm x 2". Brass Female Union: CCP69F015 - 15mm x 1/2", CCP69F022 - 22mm x 3/4", CCP69F028 - 28mm x 1", CCP69F035- 35mm x 1.1/4", CCP69F042 - 42mm x 1.1/2", CCP69F054 - 54mm x 2". Dual Port Tee: CCP32067015 - 66.7mm x 66.7mm x 1/2", CCP32076015- 76.1mm x 76.1mm x 1/2", CCP32108020 - 108mm x 108mm x 1/2".

Product Images

Approval Holder:

Smith Brothers Stores Limited

Company Name

Smith Brothers Stores Limited

Address

Unit V2 Winchester Avenue, Blaby, Leicester

Postcode

LE8 4GZ

Phone

0116 222 7330

General Email

kel.phillips@sbs.co.uk

View All Listings by this Company