Directory Search Results

Print List

#2303313

Range of screw down stop valves with plastic bodies, EPDM washers and ‘O’ rings. For use with polyethylene pipe (manufactured to EN 12201). The products are supplied with loose pipe inserts. For above and below ground use. Maximum working pressure 16 bar. Cold water use only.

Section:
2320 Valves
Section Subtitle:
Stop, plastic, screw down.
WRAS Approval Number:
2303313
Size:
20mm, 25mm and 32mm pushfit, & ¾” BSP.
Marking:
Talbot, PN, flow arrow, size and water moulded on body.
Installation Requirements:
R001 R120
Expiry date:
31/03/2028
Model:
E5252 - S/COCK WIS 4-23-04 PF 20MM SDR9 S/KEY, E5874 - S/COCK WIS 4-23-04 PF 25MM SDR11S/KEY, E5882 - S/COCK WIS 4-23-04 PF 32MM SDR9 S/KEY, E7616 - S/COCK WIS 4-23-04 PF 20MM S/KEY euro, E7617 - S/COCK WIS 4-23-04 PF 25MM S/KEY euro, E7618 - S/COCK WIS 4-23-04 PF 32MM S/KEY euro, SA2020303AM - S/COCK WIS 4-32-04 FI ¾ IN BSP.
Product Images

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval


#2303019

Range of combination valves consisting of an in-line adjustable pressure reducing valve (between 1.5 and 6.0 bar) and a pressure relief valve, with DZR Brass bodies, EPDM `O`-rings and an EPDM diaphragm. CWIC110004 model - Pressure reducing valve pre-set at 3.5 bar and pressure relief valve set at 6.0 bar. CWIC200055 model - Pressure reducing valve pre-set at 3.0 bar and pressure relief valve set at 4.5 bar. The product incorporates a stainless-steel mesh and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). For use with copper pipe (manufactured to BS EN 1057). Maximum supply pressure 16.0 bar. Outlet pressure range 1.5 bar to 6.0 bar (both models). Maximum operating temperature 20°C.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2303019
Size:
22mm compression inlet and outlet
Marking:
Reliance Water Controls and pressure on pressure reducing valve cap. WRAS, CR, flow arrow, PN & DN on body. Reliance Water Controls and pressure on relief valve cap.
Installation Requirements:
R001 R120
Expiry date:
31/03/2028
Model:
CWIC110004 CWIC200055
Product Images

Approval Holder:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2201098

Range of regulating valves with blue epoxy coated ductile iron bodies incorporating EPDM gaskets and hand wheel operating member. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:
2348 Valves
Section Subtitle:
Balancing.
WRAS Approval Number:
2201098
Size:
DN65 - DN300 flanged inlet and outlet connections
Marking:
Flowcon IVC, PN, DN, WRAS and other technical information on name plate on body. DN on body.
Installation Requirements:
R001
Expiry date:
31/01/2027
Model:
FSBXXXN16GF231/FSBXXXN25GF231

Approval Holder:
FlowCon International Valve Company (FIVC)
Company Name
FlowCon International Valve Company (FIVC)
Address
Trafikcenter Alle 17, DK-4200 Slagelse, Denmark
Phone
+45 2912 4363
General Email
mt@flowconivc.com

View All Listings by this Company

Print This Approval


#2301525

‘PureOne hose’ (formerly known as ‘Clearwater hose’). Multi-layered hose manufactured on a mandrill by hand, consisting of a colourless, transparent PE inner layer and a blue coloured EPDM outer layer. Please note that the hose has many layers but the approval describes only the inner and outer layers. For use with water up to 50°C.

Section:
5140 Hoses & Tubing
Expiry date:
31/01/2028

Approval Holder:
Contitech Canada INC.
Company Name
Contitech Canada INC.
Address
127 Rang Parent, St-Alphonse de Granby, QC, J0E 2A0
Country
Canada

View All Listings by this Company

Print This Approval


#2302538

'ILPEA 70-90 EPDM HOSE WRAS AF'. Black coloured, extruded EPDM hose. Shore hardness 80. Tested in-radius size 1.3mm. For use with water up to 23°C.

Section:
5140 Hoses & Tubing
Expiry date:
29/02/2028

Approval Holder:
Industrie ILPEA spa
Company Name
Industrie ILPEA spa
Address
Viale Industrie, 887, 21020 Malgesso (VA)
Country
Italy

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 227 of 446

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.