Range of plastic filter heads and housings. Maximum working pressure 8.6 bar. Cold water use only.

Section:

1050 Filters and Housings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Aqua Cure Ltd. model and operating parameters on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

30/06/2030

Model:

Filter heads - ¼” & 3/8” Push Fit: 22010240 & 22010245. Filter housings - 32.55mm ØD to 32.71mm ØD: 22012458, 22000542, 22000548, 22000540 & 22000566. 22000454 – ¼” push fit.

Approval Holder:

Aqua Cure Limited

Company Name

Aqua Cure Limited

Address

3A & 3B Dakota business park Dakota way Burscough Lancashire

Postcode

L408AF

Country

United Kingdom

Phone

01704 516916

General Email

Phill.mayer@aquacure.co.uk

View All Listings by this Company

‘GM50xx’ range of stainless steel (SS304 or SS316L) press-fit fittings incorporating EPDM ‘O’-rings for use with *- STPT304 and *- STPT316 stainless steel pipes. The GM5004 prefix models also incorporates an EPDM gasket on the union nut. Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250615009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15 - 108mm. ½” - 3” BSP (M). ½” - 2” BSP (F).

Marking:

Kasinpress (brand of WENZHOU KASIN VALVE PIPE FITTING CO., LTD), size, WRAS and material grade on fitting body. WRAS, Kasinpress (brand of WENZHOU KASIN VALVE PIPE FITTING CO., LTD), size, material grade, EN10312 and date of manufacture (YYYY/MM) on pipe.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Adapter 90 with female thread: GM5016-1505: 15×Rp½. GM5016-1805: 18×Rp½. GM5016-22075: 22×Rp¾. Adapter with female thread: GM5002-1505: 15×Rp½. GM5002-1805: 18×Rp½. GM5002-22075: 22×Rp¾. GM5002-281: 28×Rp1. GM5002-351025: 35×Rp1¼. GM5002-42105: 42×Rp1½. GM5002-542: 54×Rp2. Bridge with plain ending: GM5035-18: 18. GM5035-22: 22. GM5035-28: 28. Cap: GM5024-15: 15. GM5024-18: 18. GM5024-22: 22. GM5024-28: 28. GM5024-35: 35. GM5024-42: 42. GM5024-54: 54. GM5024-76: 76.1. GM5024-89: 88.9. GM5024-108: 108. Elbow 45 with press ending: GM5008-15: 15. GM5008-18: 18. GM5008-22: 22. GM5008-28: 28. GM5008-35: 35. GM5008-42: 42. GM5008-54: 54. GM5008-76: 76.1. GM5008-89: 88.9. GM5008-108: 108. Elbow 45 with plain ending: GM5009-15: 15. GM5009-18: 18. GM5009-22: 22. GM5009-28: 28. GM5009-35: 35. GM5009-42: 42. GM5009-54: 54. GM5009-76: 76.1. GM5009-89: 88.9. GM5009-108: 108. Elbow 90 with press ending: GM5006-15: 15. GM5006-18: 18. GM5006-22: 22. GM5006-28: 28. GM5006-35: 35. GM5006-42: 42. GM5006-54: 54. GM5006-76: 76.1. GM5006-89: 88.9. GM5006-108 -108. Elbow 90 with female thread: GM5021-1505: 15×Rp½. GM5021-1805: 18×Rp½. GM5021-22075: 22×Rp¾. GM5021-281: 28×Rp1. GM5021-351024: 35×Rp1¼. GM5021-42105: 42×Rp1½. GM5021-542: 54×Rp2. Elbow: 90 with: male thread: GM5010-1505: 15×R½. GM5010-1805: 18×R½. GM5010-22075: 22×R¾ Elbow 90 with plain ending: GM5007-15: 15. GM5007-18: 18. GM5007-22: 22. GM5007-28: 28. GM5007-35: 35. GM5007-42: 42. GM5007-54: 54. GM5007-76: 76.1. GM5007-89: 88.9. GM5007-108: 108. Reducer coupling with plain ending: GM5005-1815: 18×15. GM5005-2218: 22×18. GM5005-2818: 28×18. GM5005-3522: 35×22. GM5005-3528: 35×28. GM5005-4222: 42×22. GM5005-4228: 42×28. GM5005-4235: 42×35. GM5005-5428: 54×28. GM5005-5435: 54×35. GM5005-5442: 54×42. Reducer coupling with press ending: GM5011-1815: 18×15. GM5011-2215: 22×15. GM5011-2218: 22×18. GM5011-2815: 28×15. GM5011-2818: 28×18. GM5011-2822: 28×22. GM5011-3515: 35×15. GM5011-3518: 35×18. GM5011-3522: 35×22. GM5011-3528: 35×28. GM5011-4215: 42×15. GM5011-4218: 42×18. GM5011-4222: 42×22. GM5011-4228: 42×28. GM5011-4235: 42×35. GM5011-5415: 54×15. GM5011-5418: 54×18. GM5011-5422: 54×22. GM5011-5428: 54×28. GM5011-5435: 54×35. GM5011-5442: 54×42. GM5011-6735: 67×35. GM5011-6754: 67×54. GM5011-7654: 76×54. GM5011-8954: 89×54. GM5011-8976: 89×76. GM5011-10854: 108×54. GM5011-10876: 108×76. GM5011-10889: 108×89. Reducer Tee with press ending: GM5015-1815: 18×15×18. GM5015-2215: 22×15×22. GM5015-2218: 22×18×22. GM5015-2815: 28×15×28. GM5015-2818: 28×18×28. GM5015-2822: 28×22×28. GM5015-3522: 35×22×35. GM5015-3528: 35×28×35. GM5015-4222: 42×22×42. GM5015-4228: 42×28×42. GM5015-4235: 42×35×42. GM5015-5422: 54×22×54. GM5015-5428: 54×28×54. GM5015-5435: 54×35×54. GM5015-5442: 54×42×54. GM5015-7642: 76.1×42×76.1. GM5015-7654: 76.1×54×76.1. GM5015-8954: 88.9×54×88.9 GM5015-10854: 108×54×108. GM5015-10876: 108×76.1×108. GM5015-10889: 108×88.9×108 Equal coupling with press ending: GM5001-15: 15. GM5001-18: 18. GM5001-22: 22 GM5001-28: 28. GM5001-35: 35. GM5001-42: 42. GM5001-54: 54. GM5001-76: 76.1. GM5001-89: 88.9. GM5001-108: 108 Adapter with male thread: GM5003-1505: 15×R½. GM5003-1805: 18×R½. GM5003-18075: 18×R¾. GM5003-2205: 22×R½. GM5003-22075: 22×R¾. GM5003-281: 28×R1. GM5003-351025: 35×R1¼. GM5003-42105: 42×R1½. GM5003-542: 54×R2. GM5003-76205: 76.1×R2½. GM5003-893: 88.9×R3. Slip coupling with press ending: GM5019-15: 15. GM5019-18: 18. GM5019-22: 22. GM5019-28: 28. GM5019-35: 35. GM5019-42: 42 GM5019-54: 54. Tee with press ending: GM5012-15: 15. GM5012-18: 18. GM5012-22: 22. GM5012-28: 28. GM5012-35: 35. GM5012-42: 42. GM5012-54: 54. GM5012-76: 76.1. GM5012-89: 88.9. GM5012-108: 108. Tee with male thread: GM5013-1505: 15×R½. GM5013-1805: 18×R½. GM5013-2205: 22×R½. GM5013-22075: 22×R¾. GM5013-2805: 28×R½. GM5013-28075: 28×R¾. GM5013-281: 28×R1. GM5013-3505: 35×R½. GM5013-351025: 35×R1¼. GM5013-421025: 42×R1¼. GM5013-54105: 54×R1½. GM5013-542: 54×R2. Tee with female thread:: GM5014-1505: 15×Rp½. GM5014-1805: 18×Rp½. GM5014-2205: 22×Rp½. GM5014-22075: 22×Rp¾. GM5014-2805: 28×R½. GM5014-28075: 28×Rp¾. GM5014-281: 28×Rp1. GM5014-3505: 35×Rp½. GM5014-351025: 35×Rp1¼. GM5014-421025: 42×Rp1¼. GM5014-54105: 54×1½. GM5014-542: 54×Rp2. Adaptor with union nut: GM5004-1505: 15×G½. GM5004-1805: 18×G½. GM5004-18075: 18×G¾. GM5004-2205: 22×G½. GM5004-22075: 22×G¾. GM5004-221: 22×G1. GM5004-281: 28×G1. GM5004-351025: 35×G1¼. GM5004-421075: 42×G1¾. GM5004-542: 54×G2. Stainless steel pipe (SS304 or SS316L): *- STPT304 (SS304). *- STPT316L (SS316L). Where * = size in mm between 15 and 108 (in whole numbers: 15, 18, 22, 28, 35, 42, 54, 67, 76/76.1, 88.9/89, 108).

Product Images

Approval Holder:

WENZHOU KASIN VALVE PIPE FITTING CO., LTD

Company Name

WENZHOU KASIN VALVE PIPE FITTING CO., LTD

Address

NO.2‐1802 Caizhi Building, No. 88, Binhang Road, Yongzhong Sub‐District, Longwan District, Wenzhou, Zhejiang

Country

China

View All Listings by this Company

Range of stainless-steel press fittings with EPDM ‘O’-rings for use with stainless-steel pipe to EN10312. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

GD Press, size, 304L, model number on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Coupling GDC5001 OD15 GDC5002 OD18 GDC5003 OD22 GDC5004 OD28 GDC5005 OD35 GDC5006 OD42 GDC5007 OD54 GDC6501 OD66.7 GDC5008 OD76.1 GDC5009 OD88.9 GDC5010 OD108 Long Coupling GDC5011 OD15 GDC5012 OD18 GDC5013 OD22 GDC5014 OD28 GDC5015 OD35 GDC5016 OD42 GDC5017 OD54 GDC6502 OD66.7 GDC5018 OD76.1 GDC5019 OD88.9 GDC5020 OD108 Reducer with Plain End GDC5021 OD18×OD15 GDC5022 OD22×OD15 GDC5023 OD22×OD18 GDC5024 OD28×OD15 GDC5025 OD28×OD18 GDC5026 OD28×OD22 GDC5048 OD35×OD15 GDC5027 OD35×OD18 GDC5029 OD35×OD22 GDC5030 OD35×OD28 GDC5031 OD42×OD15 GDC5032 OD42×OD18 GDC5033 OD42×OD22 GDC5034 OD42×OD28 GDC5035 OD42×OD35 GDC5036 OD54×OD15 GDC5037 OD54×OD18 GDC5038 OD54×OD22 GDC5039 OD54×OD28 GDC5040 OD54×OD35 GDC5041 OD54×OD42 GDC6503 OD66.7×OD42 GDC6504 OD66.7×OD54 GDC5028 OD76.1×OD42 GDC5042 OD76.1×OD54 GDC6505 OD76.1×OD66.7 GDC5049 OD88.9×OD42 GDC5043 OD88.9×OD54 GDC6506 OD88.9×OD66.7 GDC5044 OD88.9×OD76.1 GDC5045 OD108×OD54 GDC6507 OD108×OD66.7 GDC5046 OD108×OD76.1 GDC5047 OD108×OD88.9 90° Elbow GDC6051 OD15 GDC6052 OD18 GDC6053 OD22 GDC6054 OD28 GDC6055 OD35 GDC6056 OD42 GDC6057 OD54 GDC6511 OD66.7 GDC6058 OD76.1 GDC6059 OD88.9 GDC6060 OD108 90° Elbow with Plain End GDC6071 OD15 GDC6072 OD18 GDC6073 OD22 GDC6074 OD28 GDC6075 OD35 GDC6076 OD42 GDC6077 OD54 GDC6512 OD66.7 GDC6078 OD76.1 GDC6079 OD88.9 GDC6080 OD108 45° Elbow GDC6101 OD15 GDC6102 OD18 GDC6103 OD22 GDC6104 OD28 GDC6105 OD35 GDC6106 OD42 GDC6107 OD54 GDC6513 OD66.7 GDC6108 OD76.1 GDC6109 OD88.9 GDC6110 OD108 45° Elbow with Plain End GDC6121 OD15 GDC6122 OD18 GDC6123 OD22 GDC6124 OD28 GDC6125 OD35 GDC6126 OD42 GDC6127 OD54 GDC6514 OD66.7 GDC6128 OD76.1 GDC6129 OD88.9 GDC6130 OD108 Tee GDC5181 OD15 GDC5182 OD18 GDC5183 OD22 GDC5184 OD28 GDC5185 OD35 GDC5186 OD42 GDC5187 OD54 GDC6515 OD66.7 GDC5188 OD76.1 GDC5189 OD88.9 GDC5190 OD108 Reducing Tee GDC5191 OD18×OD15 GDC5192 OD22×OD15 GDC5193 OD22×OD18 GDC5194 OD28×OD15 GDC5195 OD28×OD18 GDC5196 OD28×OD22 GDC5197 OD35×OD15 GDC5198 OD35×OD18 GDC5199 OD35×OD22 GDC5200 OD35×OD28 GDC5201 OD42×OD15 GDC5202 OD42×OD18 GDC5203 OD42×OD22 GDC5204 OD42×OD28 GDC5205 OD42×OD35 GDC5206 OD54×OD15 GDC5207 OD54×OD18 GDC5208 OD54×OD22 GDC5209 OD54×OD28 GDC5210 OD54×OD35 GDC5211 OD54×OD42 GDC6517 OD66.7×OD22 GDC6518 OD66.7×OD28 GDC6519 OD66.7×OD35 GDC6520 OD66.7×OD42 GDC6521 OD66.7×OD54 GDC5212 OD76.1×OD22 GDC5213 OD76.1×OD28 GDC5214 OD76.1×OD35 GDC5215 OD76.1×OD42 GDC5216 OD76.1×OD54 GDC6522 OD76.1×OD66.7 GDC5217 OD88.9×OD22 GDC5218 OD88.9×OD28 GDC5219 OD88.9×OD35 GDC5220 OD88.9×OD42 GDC5221 OD88.9×OD54 GDC6523 OD88.9×OD66.7 GDC5222 OD88.9×OD76.1 GDC5223 OD108×OD22 GDC5224 OD108×OD28 GDC5225 OD108×OD35 GDC5226 OD108×OD42 GDC5227 OD108×OD54 GDC6524 OD108×OD66.7 GDC5228 OD108×OD76.1 GDC5229 OD108×OD88.9 Tee with Male Thread End GDC5231 OD15×R1/2 GDC5232 OD18×R1/2 GDC5239 OD22×R1/2 GDC5233 OD22×R3/4 GDC5234 OD22×R1 GDC5240 OD28×R1/2 GDC5283 OD28×R3/4 GDC5235 OD28×R1 GDC5281 OD35×Rp3/4 GDC5236 OD35×Rp1 1/4 GDC5237 OD42×Rp1 1/2 GDC5282 OD54×Rp1/2 GDC5238 OD54×Rp2 Tee with Female Thread End GDC5241 OD15×Rp1/2 GDC5242 OD18×Rp1/2 GDC5243 OD18×Rp3/4 GDC5244 OD22×Rp1/2 GDC5245 OD22×Rp3/4 GDC5246 OD28×Rp1/2 GDC5247 OD28×Rp3/4 GDC5248 OD28×Rp1 GDC5249 OD35×Rp1/2 GDC5250 OD35×Rp3/4 GDC5262 OD35×Rp1 GDC5263 OD35×Rp1 1/4 GDC5251 OD42×Rp1/2 GDC5252 OD42×Rp3/4 GDC5264 OD42×Rp1 GDC5265 OD42×Rp1 1/2 GDC5253 OD54×Rp1/2 GDC5254 OD54×Rp3/4 GDC5266 OD54×Rp1 GDC5255 OD54×Rp2 GDC6531 OD66.7×Rp1/2 GDC6532 OD66.7×Rp3/4 GDC6533 OD66.7×Rp1 1/2 GDC5256 OD76.1×Rp3/4 GDC5257 OD76.1×Rp2 GDC5258 OD88.9×Rp3/4 GDC5259 OD88.9×Rp2 GDC5260 OD108×Rp3/4 GDC5261 OD108×Rp2 Adaptor with Male Thread End GDC5360 OD15×R3/8 GDC5361 OD15×R1/2 GDC5362 OD15×R3/4 GDC5363 OD18×R1/2 GDC5364 OD18×R3/4 GDC5365 OD22×R1/2 GDC5366 OD22×R3/4 GDC5367 OD22×R1 GDC5368 OD28×R3/4 GDC5369 OD28×R1 GDC5370 OD28×R1 1/4 GDC5371 OD35×R1 GDC5372 OD35×R1 1/4 GDC5373 OD35×R1 1/2 GDC5374 OD42×R1 1/4 GDC5375 OD42×R1 1/2 GDC5376 OD54×R1 1/2 GDC5377 OD54×R2 GDC6541 OD66.7×R2 1/2 GDC5378 OD76.1×R2 1/2 GDC5379 OD88.9×R3 GDC5380 OD108×R4 Adaptor with Female Thread End GDC5381 OD15×Rp1/2 GDC5382 OD15×Rp3/4 GDC5383 OD18×Rp1/2 GDC5384 OD18×Rp3/4 GDC5385 OD22×Rp1/2 GDC5386 OD22×Rp3/4 GDC5387 OD22×Rp1 GDC5388 OD28×Rp3/4 GDC5389 OD28×Rp1 GDC5390 OD28×Rp1 1/4 GDC5391 OD35×Rp1 GDC5392 OD35×Rp1 1/4 GDC5393 OD35×Rp1 1/2 GDC5394 OD42×Rp1 1/4 GDC5395 OD42×Rp1 1/2 GDC5396 OD54×Rp1 1/2 GDC5397 OD54×Rp2 GDC6542 OD66.7×Rp2 1/2 GDC5398 OD76.1×Rp2 1/2 GDC5399 OD88.9×Rp3 GDC5400 OD108×Rp4 Cap GDC5421 OD15 GDC5422 OD18 GDC5423 OD22 GDC5424 OD28 GDC5425 OD35 GDC5426 OD42 GDC5427 OD54 GDC6542 OD66.7 GDC5428 OD76.1 GDC5429 OD88.9 GDC5430 OD108 Adaptor with Union Nut GDC5341 OD15×G1/2 GDC5353 OD15×G3/4 GDC5342 OD18×G1/2 GDC5343 OD18×G3/4 GDC5345 OD22×G1 GDC5347 OD28×G1 GDC5348 OD28×G1 1/4 GDC5359 OD35×G1 1/4 GDC5350 OD35×G1 1/2 GDC5351 OD42×G1 3/4 GDC5346 OD42×G1 1/2 GDC5356 OD54×G2 GDC5352 OD54×G2 3/8 Adaptor with Union with Female thread GDC5451 OD15×Rp1/2 GDC5452 OD15×Rp3/4 GDC5453 OD18×Rp1/2 GDC5454 OD18×Rp3/4 GDC5455 OD22×Rp3/4 GDC5456 OD22×Rp1 GDC5457 OD28×Rp1 GDC5458 OD35×Rp1 1/4 GDC5459 OD42×Rp1 1/2 GDC5460 OD54×Rp2 Adaptor Union with Male Thread GDC5431 OD15×R1/2 GDC5432 OD15×R3/4 GDC5433 OD18×R1/2 GDC5434 OD18×R3/4 GDC5435 OD22×R1/2 GDC5436 OD22×R3/4 GDC5437 OD22×R1 GDC5438 OD28×R1 GDC5439 OD35×R1 1/4 GDC5440 OD42×R1 1/2 GDC5441 OD54×R2 Adaptor Union GDC5471 OD15 GDC5472 OD18 GDC5473 OD22 GDC5474 OD28 GDC5475 OD35 GDC5476 OD42 GDC5477 OD54 Flange with Pressing Socket GDC5301 OD15 GDC5302 OD18 GDC5303 OD22 GDC5304 OD28 GDC5305 OD35 GDC5306 OD42 GDC5307 OD54 GDC6536 OD66.7 GDC5308 OD76.1 GDC5309 OD88.9 GDC5310 OD108

Approval Holder:

Grande-tek Flow Control Co., Ltd

Company Name

Grande-tek Flow Control Co., Ltd

Address

Industrial Zone of Yunhe District, Fuyang Road, Cangzhou, Hebei

Postcode

061000

Country

China

View All Listings by this Company

‘Uponor Q&E’ range of brass press-fit fittings for use with PE-Xa-PE-PE ‘Uponor Aqua Pipe AU’ multi-layered pipes. Maximum operating pressure 10 bar. Maximum operating temperature 70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604025

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm – 25mm, ½” – 1”.

Marking:

Pipe - Uponor, size, PN, temperature, SDR & PE-Xa. Fittings - Uponor logo, size and other technical information.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Uponor Aqua Pipe AU 3-layer pipes: 1126786 - Uponor Aqua Pipe AU 16x2,2 100 mt, 1126787 - Uponor Aqua Pipe AU 20x2,8 100 mt, 1126788 - Uponor Aqua Pipe AU 25x3,5 50mt. Brass fittings: Uponor Q&E Coupling LL: 1126789 - 16x16, 1126790 - 20x20, 1126791 - 25x25. Uponor Q&E Reducer LL: 1126792 - 20x16, 1126793 - 25x16, 1126794 - 25x20. Uponor Q&E Elbow LL: 1126795 - 16x16, 1126796 - 20x20, 1126797 - 25x25. Uponor Q&E Tee LL: 1126798 - 16x16x16, 1126799 - 20x20x20, 1126800 - 25x25x25. Uponor Q&E Tee Reducer LL: 1126801 - 16x20x16, 1126802 - 20x16x16, 1126803 - 20x16x20, 1126804 - 20x20x16, 1126805 - 25x16x25, 1126806 - 25x20x25. Uponor Q&E Plug LL: 1126807 - 16, 1126808 - 20. Uponor Q&E Adapter Female LL: 1126809 - 16-Rp1/2", 1126810 - 20-Rp1/2", 1126811 - 20-Rp3/4", 1126812 - 20-Rp1", 1126813 - 25-Rp1". Uponor Q&E Adapter Male LL: 1126814 - 16-R1/2", 1126815 - 16-R3/4", 1126816 - 20-R1/2", 1126817 - 20-R3/4", 1126818 - 20-R1", 1126819 - 25-R3/4", 1126820 - 25-R1". Uponor Q&E Adapter Swivel Nut: 1126821 - 16-1/2", 1126822 - 20-1/2", 1126823 - 20-3/4", 1126824 - 25-3/4", 1126825 - 25-1". Uponor Q&E Elbow Swivel Nut: 1126826 - 16-1/2", 1126827 - 20-1/2". Uponor Q&E Tap Elbow LL: 1126828 - 16-1/2", 1126829 - 20-1/2", 1126830 - 20-3/4". Uponor Q&E Elbow Adapter Male LL: 1126831 - 16-G1/2", 1126832 - 20-G1/2", 1126833 - 20-R1/2", 1126834 - 20-G3/4", 1126871 - 25-G3/4". Uponor Q&E Elbow Adapter Female LL: 1126835 - 16-1/2", 1126836 - 20-3/4", 1126837 - 25-3/4". Uponor Q&E Tee female LL: 1126838 - 25-1/2"-25, 1126839 - 25-3/4"-25. Uponor Q&E BP-Elbow LL: 1126841 - 16-1/2" MT L = 65 MM, 1126842 - 16-1/2" MT L = 90 MM, 1126843 - 16-1/2" MT L = 175 MM, 1126844 - 16-1/2" MT L = 200 MM, 1126845 - 20-1/2"MT L = 95 MM, 1126846 - 20-1/2"MT L = 200 MM, 1126847 - 20-3/4" MT L = 100 MM. Uponor Q&E Brass Adapter LL: 1126848 - 16-15 CU, 1126849 - 20-15 CU, 1126850 - 20-3/4" CU, 1126851 - 25-1" CU. Uponor Q&E Brass Adapter LL PRESS: 1126852 - 16-1/2" CU, 1126853 - 20-3/4" CU, 1126854 - 25-1" CU. Uponor Q&E adapter male thread PL: 1023003 - 16-R1/2"MT, 1023005 - 20-R1/2"MT, 1023007 - 25-R3/4"MT. Uponor Smart Aqua tap elbow term. box Q&E UP PL: 1047935 - 16-Rp1/2"FT. Uponor Smart Aqua tap elbow term. box Q&E SP PL: 1047932 - 20-Rp1/2"FT, 1047933 - 25-Rp3/4"FT.

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

‘EPH_WSP19_XXXX’ range of brass caplillary, lead free solder ring and threaded fittings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250515010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

DOZ and size on body.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

EPH_WSP19_1646 - 15mm x G1/2” Elbow: 15mm x ½” BSPP (F), EPH_WSP19_2610 - 15mm x G1/2” Elbow: 15mm x ½” BSPP (F), EPH_WSP19_2611 - 15mm x G1/2” Elbow: 15mm x ½” BSPP (M), EPH_WSP19_1642 - 15mm x R1/2” Straight: 15mm x ½” BSPT (M), EPH_WSP19_1645 - 15mm x G1/2” Straight: 15mm x ½” BSPP (F), EPH_WSP19_1643 - 22mm x G3/4” Straight: 22mm x ¾” BSPP (M).

Product Images

Approval Holder:

Hangzhou DOZ Import & Export Co., Ltd

Company Name

Hangzhou DOZ Import & Export Co., Ltd

Address

Room 302, Binke Mansion, No. 1503, Xipu Road, Binjiang District, Hangzhou Zhejiang 310053

Country

China

Phone

86 571 28180555

View All Listings by this Company

Manufacturer:

Jiangxi Avonflow Hvac Tech Co., Ltd

Company Name

Jiangxi Avonflow Hvac Tech Co., Ltd

Address

No.97, Xingye Avenue, Economic Development Zone, Shangrao City Jiangxi Province

Country

China

View All Listings by this Company