Wall mounted spout outlet (Chrome finish). The spout outlet incorporates a plastic aerator. Open outlet use only. Maximum operating temperature 60.0°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

250402033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP M

Marking:

Dornbracht logo on body

Installation Requirements:

R001 R040

Expiry date:

30/04/2030

Model:

13801660

Approval Holder:

Dornbracht AG & Co. KG

Company Name

Dornbracht AG & Co. KG

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Floor standing spout outlet (chromium plated brass) incorporating a plastic aerator and a concealed brass floor mounting. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

250402056

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

DORNBRACHT on cover plate.

Installation Requirements:

R001 R010 R040

Expiry date:

30/04/2030

Model:

13672661 Meta – Bath spout for freestanding assembly 3594597090 – Concealed floor mounting

Approval Holder:

Dornbracht AG & Co. KG

Company Name

Dornbracht AG & Co. KG

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Range of chemical dosing equipment which incorporate self-closing valves within a plastic body with EPDM o-rings. The outlet of the injector incorporates a connection for injection of chemicals via venturi action. Only suitable for use with chemicals no greater than a FC3, additional backflow protection is required for chemicals greater than FC3. Maximum working pressure 9.0 bar. Maximum operating temperature 70ºC.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

250404706

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) ¾” BSP (F)

Marking:

SEKO, model and technical information on adhesive label on case.

Installation Requirements:

R001 R040 R160 R415

Expiry date:

30/04/2030

Model:

PXB1F04N PROMAX BUTTON 1P FLEX 4LPM C PXS1F04N PROMAX SLIDE 1P FLEX 4LPM C PXB4F04N PROMAX BUTTON 4P FLEX 4LPM C PXS4F04N PROMAX SLIDE 4P FLEX 4LPM C PXB1F16N PROMAX BUTTON 1P FLEX 14LPM C PXB4F16N PROMAX BUTTON 4P FLEX 14LPM C PXB1F30N PROMAX BUTTON 1P FLEX 30LPM C PXB4F30N PROMAX BUTTON 4P FLEX 30LPM C PXS1F16N PROMAX SLIDE 1P FLEX 14LPM C PXS4F16N PROMAX SLIDE 4P FLEX 14LPM C PXS1F30N PROMAX SLIDE 1P FLEX 30LPM C PXS4F30N PROMAX SLIDE 4P FLEX 30LPM C DPB1F04N DILUIT PLUS BUTTON 1P FLEX 4LPM C DPS1F04N DILUIT PLUS SLIDE 1P FLEX 4LPM C DPB4F04N DILUIT PLUS BUTTON 4P FLEX 4LPM C DPS4F04N DILUIT PLUS SLIDE 4P FLEX 4LPM C DPB1F16N DILUIT PLUS BUTTON 1P FLEX 14LPM C DPB4F16N DILUIT PLUS BUTTON 4P FLEX 14LPM C DPB1F30N DILUIT PLUS BUTTON 1P FLEX 30LPM C DPB4F30N DILUIT PLUS BUTTON 4P FLEX 30LPM C DPS1F16N DILUIT PLUS SLIDE 1P FLEX 14LPM C DPS4F16N DILUIT PLUS SLIDE 4P FLEX 14LPM C DPS1F30N DILUIT PLUS SLIDE 1P FLEX 30LPM C DPS4F30N DILUIT PLUS SLIDE 4P FLEX 30LPM C

Approval Holder:

SEKO S.p.A

Company Name

SEKO S.p.A

Address

Via Giuseppe Di Vittorio n. 25 – 20068 Peschiera Borromeo (MI)

Country

Italy

View All Listings by this Company

‘LFLF10xx’ range of stainless steel press-fit fittings incorporating EPDM ‘O’-rings for use with ‘LFLP1001’ stainless-steel pipe. Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250415017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

LOFFREY, material code and size on fitting body. LOFFREY, material code, size, EN 10312 and date of manufacture (YYYY/M/D) on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

Equal Coupling: LFLF1001-15: 15mm, LFLF1001-18: 18mm, LFLF1001-22: 22mm, LFLF1001-28: 28mm, LFLF1001-35: 35mm, LFLF1001-42: 42mm, LFLF1001-54: 54mm, LFLF1001-65: 76.1mm, LFLF1001-80: 88.9mm, LFLF1001-100: 108mm. Reducer Coupling-A: LFLF1002-018015: 18mm×15mm, LFLF1002-022015: 22mm×15mm, LFLF1002-022018: 22mm×18mm, LFLF1002-028015: 28mm×15mm, LFLF1002-028018: 28mm×18mm, LFLF1002-028022: 28mm×22mm, LFLF1002-035015: 35mm×15mm, LFLF1002-035018: 35mm×18mm, LFLF1002-035022: 35mm×22mm, LFLF1002-035028: 35mm×28mm, LFLF1002-042015: 42mm×15mm, LFLF1002-042018: 42mm×18mm, LFLF1002-042022: 42mm×22mm, LFLF1002-042028: 42mm×28mm, LFLF1002-042035: 42mm×35mm, LFLF1002-054042: 54mm×42mm. Reducer Coupling-B: LFLF1003-018015: 18mm×15mm, LFLF1003-022015: 22mm×15mm, LFLF1003-022018: 22mm×18mm, LFLF1003-028015: 28mm×15mm, LFLF1003-028018: 28mm×18mm, LFLF1003-028022: 28mm×22mm, LFLF1003-035015: 35mm×15mm, LFLF1003-035018: 35mm×18mm, LFLF1003-035022: 35mm×22mm, LFLF1003-035028: 35mm×28mm, LFLF1003-042015: 42mm×15mm, LFLF1003-042018: 42mm×18mm, LFLF1003-042022: 42mm×22mm, LFLF1003-042028: 42mm×28mm, LFLF1003-042035: 42mm×35mm, LFLF1003-054015: 54mm×15mm, LFLF1003-054018: 54mm×18mm, LFLF1003-054022: 54mm×22mm, LFLF1003-054028: 54mm×28mm, LFLF1003-054035: 54mm×35mm, LFLF1003-054042: 54mm×42mm. Adjustable coupling: LFLF1004-15: 15mm, LFLF1004-18: 18mm, LFLF1004-22: 22mm, LFLF1004-28: 28mm, LFLF1004-35: 35mm, LFLF1004-42: 42mm, LFLF1004-54: 54mm, LFLF1004-65: 76.1mm, LFLF1004-80: 88.9mm, LFLF1004-100: 108mm. Female coupling: LFLF1005-15×Rp1/2: 15mm×Rp1/2, LFLF1005-22×Rp3/4: 22mm×Rp3/4, LFLF1005-28×Rp1: 28mm×Rp1, LFLF1005-35×Rp1‐1/4: 35mm×Rp1-1/4, LFLF1005-42×Rp1‐1/2: 42mm×Rp1-1/2, LFLF1005-54×Rp2: 54mm×Rp2. Male coupling: LFLF1006-15×R1/2: 15mm×R1/2, LFLF1006-18×R1/2: 18mm×R1/2, LFLF1006-22×R3/4: 22mm×R3/4, LFLF1006-28×R1: 28mm×R1, LFLF1006-35×R1‐1/4: 35mm×R1-1/4, LFLF1006-42×R1‐1/2: 42mm×R1-1/2, LFLF1006-54×R2: 54mm×R2. Rotatable coupling: LFLF1007-15×G1/2: 15mm×G1/2, LFLF1007-18×G1/2: 18mm×G1/2, LFLF1007-22×G3/4: 22mm×G3/4, LFLF1007-28×G1: 28mm×G1, LFLF1007-35×G1‐1/4: 35mm×G1-1/4, LFLF1007-42×G1‐1/2: 42mm×G1-1/2, LFLF1007-54×G2: 54mm×G2. 90° equal elbow-A： LFLF1008-15: 15mm, LFLF1008-18: 18mm, LFLF1008-22: 22mm, LFLF1008-28: 28mm, LFLF1008-35: 35mm, LFLF1008-42: 42mm, LFLF1008-54: 54mm, LFLF1008-65: 76.1mm, LFLF1008-80: 88.9mm, LFLF1008-100: 108mm. 90° equal elbow-B： LFLF1009-15: 15mm, LFLF1009-18: 18mm, LFLF1009-22: 22mm, LFLF1009-28: 28mm, LFLF1009-35: 35mm, LFLF1009-42: 42mm, LFLF1009-54: 54mm. Female elbow： LFLF1010-15×Rp1/2: 15mm×Rp1/2, LFLF1010-18×Rp1/2: 18mm×Rp1/2, LFLF1010-22×Rp3/4: 22mm×Rp3/4, LFLF1010-28×Rp1: 28mm×Rp1, LFLF1010-35×Rp1‐1/4: 35mm×Rp1-1/4, LFLF1010-42×Rp1‐1/2: 42mm×Rp1-1/2, LFLF1010-54×Rp2: 54mm×Rp2. Male elbow： LFLF1011-15×R1/2: 15mm×R1/2, LFLF1011-18×R1/2: 18mm×R1/2, LFLF1011-22×R1/2: 22mm×R1/2, LFLF1011-22×R3/4: 22mm×R3/4, LFLF1011-28×R1: 28mm×R1, LFLF1011-35×R1‐1/4: 35mm×R1-1/4, LFLF1011-42×R1‐1/2: 42mm×R1-1/2, LFLF1011-54×R2: 54mm×R2. 45° equal elbow-A： LFLF1012-15: 15mm, LFLF1012-18: 18mm, LFLF1012-22: 22mm, LFLF1012-28: 28mm, LFLF1012-35: 35mm, LFLF1012-42: 42mm, LFLF1012-54: 54mm. 45° equal elbow-B： LFLF1013-15: 15mm, LFLF1013-18: 18mm, LFLF1013-22: 22mm, LFLF1013-28: 28mm, LFLF1013-35: 35mm, LFLF1013-42: 42mm, LFLF1013-54: 54mm. Equal tee： LFLF1014-15: 15mm, LFLF1014-18: 18mm, LFLF1014-22: 22mm, LFLF1014-28: 28mm, LFLF1014-35: 35mm, LFLF1014-42: 42mm, LFLF1014-54: 54mm, LFLF1014-65: 76.1mm, LFLF1014-80: 88.9mm, LFLF1014-100: 108mm. Reducing tee： LFLF1015-018015: 18mm×15mm, LFLF1015-022015: 22mm×15mm, LFLF1015-022018: 22mm×18mm, LFLF1015-028015: 28mm×15mm, LFLF1015-028018: 28mm×18mm, LFLF1015-028022: 28mm×22mm, LFLF1015-035015: 35mm×15mm, LFLF1015-035018: 35mm×18mm, LFLF1015-035022: 35mm×22mm, LFLF1015-035028: 35mm×28mm, LFLF1015-042015: 42mm×15mm, LFLF1015-042018: 42mm×18mm, LFLF1015-042022: 42mm×22mm, LFLF1015-042028: 42mm×28mm, LFLF1015-042035: 42mm×35mm, LFLF1015-054015: 54mm×15mm, LFLF1015-054018: 54mm×18mm, LFLF1015-054022: 54mm×22mm, LFLF1015-054028: 54mm×28mm, LFLF1015-054035: 54mm×35mm, LFLF1015-054042: 54mm×42mm. Female tee： LFLF1016-15×Rp1/2: 15mm×Rp1/2, LFLF1016-18×Rp1/2: 18mm×Rp1/2, LFLF1016-22×Rp3/4: 22mm×Rp3/4, LFLF1016-28×Rp1/2: 28mm×Rp1/2, LFLF1016-28×Rp1: 28mm×Rp1, LFLF1016-35×Rp1‐1/4: 35mm×Rp1-1/4, LFLF1016-42×Rp1‐1/2: 42mm×Rp1-1/2, LFLF1016-54×Rp2: 54mm×Rp2. Male tee： LFLF1017-15×Rp1/2: 15mm×Rp1/2, LFLF1017-18×Rp1/2: 18mm×Rp1/2, LFLF1017-22×Rp3/4: 22mm×Rp3/4, LFLF1017-28×Rp1/2: 28mm×Rp1/2, LFLF1017-28×Rp1: 28mm×Rp1, LFLF1017-35×Rp1‐1/4: 35mm×Rp1-1/4, LFLF1017-42×Rp1‐1/2: 42mm×Rp1-1/2, LFLF1017-54×Rp2: 54mm×Rp2. Pipe： LFLP1001-15: 15mm, LFLP1001-18: 18mm, LFLP1001-22: 22mm, LFLP1001-28: 28mm, LFLP1001-35: 35mm, LFLP1001-42: 42mm, LFLP1001-54: 54mm, LFLP1001-65: 76.1mm, LFLP1001-80: 88.9mm, LFLP1001-100: 108mm.

Approval Holder:

Zhejiang Loffrey Technology Co., Ltd.

Company Name

Zhejiang Loffrey Technology Co., Ltd.

Address

No. 515 Binhai 15th Road, Xinghai Sub‐district, Wenzhou Economic and Technological Development Zone, Wenzhou City, Zhejiang Province

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Loffrey Technology Co., Ltd.

Company Name

Zhejiang Loffrey Technology Co., Ltd.

Address

No. 515 Binhai 15th Road, Xinghai Sub‐district, Wenzhou Economic and Technological Development Zone, Wenzhou City, Zhejiang Province

Country

China

View All Listings by this Company

Instantor range of copper press fittings with an EPDM ‘O’-ring for use with copper pipe to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250404025

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Sanbra Fyffe ‘S’ logo, size, CR and jaw profile ‘V1’ on fitting.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

CP310001 Straight Coupler 1/2" X 1/2" CP310002 Straight Coupler 3/4" X 3/4" CP310003 Straight Coupler 1" X 1" CP310021 Straight Reducing Coupler 3/4" x 1/2" CP310031 Straight Reducing Coupler 1" x 1/2" CP310032 Straight Reducing Coupler 1" x 3/4" CP3100S1 Slip Coupler 1/2" CP3100S2 Slip Coupler 3/4" CP3100S3 Slip Coupler 1" CP311001 Male Threaded Straight Coupler M.I 1/2" x Press 1/2" CP311002 Male Threaded Straight Coupler M.I 3/4" x Press 3/4" CP311003 Male Threaded Straight Coupler M.I 1" X Press 1" CP312001 Female Threaded Straight Coupler F.I 1/2" x Press 1/2" CP312002 Female Threaded Straight Coupler F.I 3/4" x Press 3/4" CP312003 Female Threaded Straight Coupler F.I 1" x Press 1" CP315001 90° Elbow 1/2" Press X 1/2" Press CP315002 90° Elbow 3/4" Press X 3/4" Press CP315003 90° Elbow 1" Press x 1" Press CP315021 90° Reducing Elbow 3/4" Press X 1/2" Press CP315031 90° Reducing Elbow 1" Press X 1/2" Press CP315032 90° Reducing Elbow 1" Press X 3/4" Press CP319001 Threaded Wall Plate Elbow F.I 1/2" x 1/2" Press CP319002 Threaded Wall Plate Elbow F.I 3/4" x 3/4" Press CP318001 Equal Tee 1/2" x 1/2" x 1/2" Press CP318002 Equal Tee 3/4" x 3/4" x 3/4" Press CP318003 Equal Tee 1" x 1" x 1" Press CP318112 Reducing Tee 1/2" X 1/2" X 3/4" CP318211 Reducing Tee 3/4" X 1/2" X 1/2" CP318212 Reducing Tee 3/4" X 1/2" X 3/4" CP318221 Reducing Tee 3/4" X 3/4" X 1/2" CP318223 Reducing Tee 3/4" X 3/4" X 1" CP318311 Reducing Tee 1" X 1/2" X 1/2" CP318312 Reducing Tee 1" x 1/2" X 3/4" CP318313 Reducing Tee 1" x 1/2" X 1" CP318321 Reducing Tee 1" x 3/4" X 1/2" CP318322 Reducing Tee 1" x 3/4" X 3/4" CP318323 Reducing Tee 1" x 3/4" X 1" CP318331 Reducing Tee 1" x 1" x 1/2" CP318332 Reducing Tee 1" x 1" x 3/4" CP319021 Push-in Reducer 3/4" Spigot x 1/2" Press CP319031 Push-in Reducer 1" Spigot x 1/2" Press CP319032 Push-in Reducer 1" Spigot x 3/4" Press CP325001 45° Obtuse Street Elbow 1/2" Spigot x 1/2" Press CP325002 45° Obtuse Street Elbow 3/4"Spigot x 3/4" Press CP325003 45° Obtuse Street Elbow 1" Spigot x 1" Press CP335001 90° Street Elbow 1/2" Spigot x 1/2" Press CP335002 90° Street Elbow 3/4" Spigot X 3/4" Press CP335003 90° Street Elbow 1" Spigot X 1" Press CP345001 45° Elbow 1/2" Press x 1/2" Press CP345002 45° Elbow 3/4" Press x 3/4" Press CP345003 45° Elbow 1" Press x 1" Press CP351001 Stop End 1/2" Press CP351002 Stop End 3/4" Press CP351003 Stop End 1" Press

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Conex Works, Santry Avenue, Dublin

Postcode

D09 K160

Country

Ireland

Phone

353 1 842 6255

General Email

sales@sanbra.ie

View All Listings by this Company