Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2312364

“CN Pressure vessel” range incorporating a HDPE liner. The products have a separate outer layer (with black, blue, grey or natural finishes). The CN Pressure vessel 24x72” D-4 model has a top and bottom opening. Maximum operating pressure 10.5 bar. Cold water use only.

Section:: 2470 Water Softeners
Section Subtitle:: Components, pressure vessels.
WRAS Approval Number:: 2312364
Size:: Models ending 2.5”: 2½” BSP (F). Models ending 4”: 4” BSP (F).
Marking:: Canature and technical information (including maximum pressure) on adhesive label on body.
Installation Requirements:: R001 R008
Expiry date:: 31/12/2028
Model:: “CN Pressure vessel” range: CN Pressure vessel 05x13” Regular-2.5”, CN Pressure vessel 05x17” Regular-2.5”, CN Pressure vessel 05x20” Regular-2.5”. CN Pressure vessel 06x12” Regular-2.5”, CN Pressure vessel 06x15” Regular-2.5”, CN Pressure vessel 06x17” Regular-2.5”, CN Pressure vessel 06x18” Regular-2.5”, CN Pressure vessel 06x22” Regular-2.5”, CN Pressure vessel 06x30” Regular-2.5”, CN Pressure vessel 06x35” Regular-2.5”. CN Pressure vessel 07x13” Regular-2.5”, CN Pressure vessel 07x15” Regular-2.5”, CN Pressure vessel 07x17” Regular-2.5”, CN Pressure vessel 07x19” Regular-2.5”, CN Pressure vessel 07x22” Regular-2.5”, CN Pressure vessel 07x24” Regular-2.5”, CN Pressure vessel 07x30” Regular-2.5”, CN Pressure vessel 07x35” Regular-2.5”, CN Pressure vessel 07x44” Regular-2.5”. CN Pressure vessel 08x13” Regular-2.5”, CN Pressure vessel 08x15” Regular-2.5”, CN Pressure vessel 08x17” Regular-2.5”, CN Pressure vessel 08x18” Regular-2.5”, CN Pressure vessel 08x22” Regular-2.5”, CN Pressure vessel 08x24” Regular-2.5”, CN Pressure vessel 08x25” Regular-2.5”, CN Pressure vessel 08x26” Regular-2.5”, CN Pressure vessel 08x30” Regular-2.5”, CN Pressure vessel 08x35” Regular-2.5”, CN Pressure vessel 08x37” Regular-2.5”, CN Pressure vessel 08x40” Regular-2.5”, CN Pressure vessel 08x44” Regular-2.5”. CN Pressure vessel 09x13” Regular-2.5”, CN Pressure vessel 09x14” Regular-2.5”, CN Pressure vessel 09x15” Regular-2.5”, CN Pressure vessel 09x16” Regular-2.5”, CN Pressure vessel 09x17” Regular-2.5”, CN Pressure vessel 09x18” Regular-2.5”, CN Pressure vessel 09x22” Regular-2.5”, CN Pressure vessel 09x24” Regular-2.5”, CN Pressure vessel 09x26” Regular-2.5”, CN Pressure vessel 09x30” Regular-2.5”, CN Pressure vessel 09x35” Regular-2.5”, CN Pressure vessel 09x40” Regular-2.5”, CN Pressure vessel 09x42” Regular-2.5”, CN Pressure vessel 09x48” Regular-2.5”. CN Pressure vessel 10x13” Regular-2.5”, CN Pressure vessel 10x15” Regular-2.5”, CN Pressure vessel 10x16” Regular-2.5”, CN Pressure vessel 10x17” Regular-2.5”, CN Pressure vessel 10x18” Regular-2.5”, CN Pressure vessel 10x19” Regular-2.5”, CN Pressure vessel 10x24” Regular-2.5”, CN Pressure vessel 10x26” Regular-2.5”, CN Pressure vessel 10x30” Regular-2.5”, CN Pressure vessel 10x35” Regular-2.5”, CN Pressure vessel 10x36” Regular-2.5”, CN Pressure vessel 10x40” Regular-2.5”, CN Pressure vessel 10x44” Regular-2.5”, CN Pressure vessel 10x47” Regular-2.5”, CN Pressure vessel 10x54” Regular-2.5”. CN Pressure vessel 11x35” Regular-2.5”, CN Pressure vessel 11x44” Regular-2.5”. CN Pressure vessel 12x17” Regular-2.5”, CN Pressure vessel 12x17” Regular-4”, CN Pressure vessel 12x35” Regular-2.5”, CN Pressure vessel 12x36” Regular-2.5”, CN Pressure vessel 12x48” Regular-2.5”, CN Pressure vessel 12x48” Regular-4”, CN Pressure vessel 12x52” Regular-2.5”, CN Pressure vessel 12x52” Regular-4”. CN Pressure vessel 13x24” Regular-2.5”, CN Pressure vessel 13x24” Regular-4”, CN Pressure vessel 13x44” Regular-2.5”, CN Pressure vessel 13x44” Regular-4”, CN Pressure vessel 13x54” Regular-2.5”, CN Pressure vessel 13x54” Regular-4”. CN Pressure vessel 14x52” Regular-2.5”, CN Pressure vessel 14x52” Regular-4”, CN Pressure vessel 14x65” Regular-2.5”, CN Pressure vessel 14x65” Regular-4”. CN Pressure vessel 16x36” Regular-2.5”, CN Pressure vessel 16x36” Regular-4”, CN Pressure vessel 16x44” Regular-2.5”, CN Pressure vessel 16x44” Regular-4”, CN Pressure vessel 16x52” Regular-2.5”, CN Pressure vessel 16x52” Regular-4”, CN Pressure vessel 16x65” Regular-2.5”, CN Pressure vessel 16x65” Regular-4”. CN Pressure vessel 18x36” Regular-4”, CN Pressure vessel 18x53” Regular-4”, CN Pressure vessel 18x65” Regular-4”, CN Pressure vessel 21x53” Regular-4”, CN Pressure vessel 21x62” Regular-4”. CN Pressure vessel 24x72” Regular-4”, CN Pressure vessel 24x72” D-4”.

Approval Holder:: Canature Health Technology Group Co.,Ltd.

Company Name
Canature Health Technology Group Co.,Ltd.
Address
No.508 & 518, Chuanda Road, Pudong New Area, Shanghai City
Country
China

View All Listings by this Company

WRAS Approval Number: #240255047

'JERLAC Bituminous sealer coat black'. Factory applied, black coloured Bitumen coating. Apply as per manufacturer's TDS reference 'BN433', dated '27/07/2023', revision '00'. Cure for 12 hours@30°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 240255047
Expiry date:: 28/02/2029

Approval Holder:: M/S German Polymers and Coatings (PVTE) Limited

Company Name
M/S German Polymers and Coatings (PVTE) Limited
Address
No-18, Othivakkam Village Kumuzhi Panchayat, Chengalpet District, Pin-603202, Tami Nadu
Country
India

View All Listings by this Company

WRAS Approval Number: #2311560

'Pentaline 1000 HT Red'. Factory applied, red coloured (once mixed), two-component epoxy coating. Mix base and hardener in a volume ratio of 3:1 and apply as per manufacturer's instructions 'Chembur R&D/PI/23/02' dated 28/12/2023. Cure for 7 days@30°C. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2311560
Expiry date:: 30/11/2028

Approval Holder:: Grauer & Weil India Ltd.

Company Name
Grauer & Weil India Ltd.
Address
Growel Corporate, Akruli Road, Kandivali (East), Mumbai 400001
Country
India

View All Listings by this Company

WRAS Approval Number: #240255031

'Hempaline® Defend 630 Cure 72', blue coloured coating. Between February 2024 and April 2025, the blue coloured coating was for use with water up to 50°C. Between May 2025 and February 2029, the blue coloured coating is for use with water up to 80°C. In May 2025, 'Hempaline® Defend 630 Cure 72', white coloured coating was added to the approval. For use with water up to 80°C. Factory applied, two-part epoxy phenolic coatings consisting of a base and curing agent. Mix base and curing agent in a 4:1 volume ratio and apply as per manufacturer's Product Data Sheet dated May 2025. Cure for 6 days@20°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 240255031
Expiry date:: 28/02/2029

Approval Holder:: Hempel A/S

Company Name
Hempel A/S
Address
Lundtoftevej 150, DK-2800, Lyngby
Country
Denmark
Phone
+45 4593 3800 Fax: +45 4288 5518

View All Listings by this Company

WRAS Approval Number: #240255048

'JERLAC Solventless Epoxy Grey'. Factory applied, grey coloured, two-component Epoxy coating. Mix Base:Curing Agent in a 2:1 volume ratio and apply as per manufacturer's TDS reference 'BN434', dated '24/07/2023', revision '01/03.12.2025'. Cure for 7 days@30°C. For use with water up to 85°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 240255048
Expiry date:: 28/02/2029

Approval Holder:: M/S German Polymers and Coatings (PVTE) Limited

Company Name
M/S German Polymers and Coatings (PVTE) Limited
Address
No-18, Othivakkam Village Kumuzhi Panchayat, Chengalpet District, Pin-603202, Tami Nadu
Country
India

View All Listings by this Company