Directory Search Results

Print List

#250555052

'AL 83275'. Factory applied, blue coloured enamel coating. Apply as per manufacturer's TDS 'TDS-2025-AL83275-REV00', dated '03.07.2025'. Cure for 7 minutes@860°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
250555052
Expiry date:
31/05/2030

Approval Holder:
Akcoat İleri Kimyasal Kaplama Malzemeleri San. ve Tic. A.Ş.
Company Name
Akcoat İleri Kimyasal Kaplama Malzemeleri San. ve Tic. A.Ş.
Address
Sakarya 2nd IZ, No:1, Street No:18 54300 Hendek, Sakarya
Country
Turkey

View All Listings by this Company

Print This Approval


#250555054

'Resicoat PI Brown'. Factory applied, brown coloured epoxy coating. Apply as per manufacturers datasheet dated March 4, 2020. Post-cure for 20 minutes@210°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
250555054
Expiry date:
31/05/2030

Approval Holder:
Akzo Nobel Powder Coatings GmbH
Company Name
Akzo Nobel Powder Coatings GmbH
Address
Markwiesenstrasse 50, D72770 Reutlingen
Country
Germany
Phone
+49 7121 519 191
General Email
info@resicoat.com

View All Listings by this Company

Print This Approval


#250455061

'Hempaline Defend 630LT'. Factory applied, two-part, white coloured epoxy coating. Mix base and cure agent in a 3:1 volume ratio and apply as per manufacturer's PDS dated November 2024. Cure for 3 days@20°C. For use with water up to 60°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
250455061
Expiry date:
30/04/2030

Approval Holder:
Hempel A/S
Company Name
Hempel A/S
Address
Lundtoftegaardsvej 91, 2800 Kgs. Lyngby
Country
Denmark

View All Listings by this Company

Print This Approval


#2103573

'Bondrite S1016'. Site applied, grey coloured (once mixed), two-component epoxy putty. Mix Part A (white coloured putty) with Part B (cream coloured putty) in a 1:1 mass ratio and apply as per manufacturer's TDS, issue date 'April 2025'. Cure for 24 hours@20°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:
5070 Epoxy Compound
Expiry date:
31/03/2026

Approval Holder:
Bondrite Adhesives Ltd.
Company Name
Bondrite Adhesives Ltd.
Address
Unit 3H Sileby Road Industrial Estate, Barrow Upon Soar, Leicester
Postcode
LE12 8LP

View All Listings by this Company

Print This Approval


#250755009

'4300051 PVC Inner Hose (black coloured), 4300052 PVC Inner Hose (white coloured) & 4300053 PVC Inner Hose (blue coloured). Single layered, extruded PVC hoses. For use with water up to 65°C.

Section:
5140 Hoses & Tubing
Expiry date:
31/07/2030

Approval Holder:
Zhejiang Kaiyue Plastic Industrial Co., Ltd.
Company Name
Zhejiang Kaiyue Plastic Industrial Co., Ltd.
Address
No 166 Jia Xi Road, Jianshan Town, Pan An Industry Zone, Zhejiang
Country
China

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2114 of 2345

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.