Directory Search Results

Print List

#2011332

Range of thermostatic mixing valves with between 1 and 6 outlets. Flow is controlled by a solenoid valve and temperature is thermostatically controlled. Models Mira Activate 1.1903.091, 1.1903.092 & 1.1903.093 incoporate a built-in pump which is set 12 litres per minute. The valves can be supplied with a shower rail, hose, handshower and/or ceiling mounted shower outlet. The inlets of the valves incorporate an isolation valve, stainless steel strainer and a single check valve cartridge however, the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Valves with ‘HP’ in model have a maximum working pressure of 5.0 bar. All other valves have a maximum working pressure of 1.0 bar. Maximum operating temperature 50°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2011332
Size:
15mm push fit connection
Marking:
Mira Showers & other technical information on body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2025
Model:
Valve only: Kohler UK 2 outlet HP valve (28209W-NA) Kohler UK 3 outlet HP valve (28210W-NA) Kohler UK 4 outlet HP valve (28211W-NA) Kohler UK 6 outlet HP valve (28212W-NA) Valve supplied with shower outlets: Mira Activate single outlet HP ceiling fed (1.1903.086) Mira Activate single outlet HP rear fed (1.1903.087) Mira Activate dual outlet HP ceiling fed (1.1903.088) Mira Activate dual outlet HP rear fed (1.1903.089) Mira Activate dual outlet HP rear fed (1.1903.090) Mira Activate single outlet pumped rear fed (1.1903.091) Mira Activate dual outlet pumped ceiling fed (1.1903.092) Mira Activate dual outlet pumped rear fed (1.1903.093)
Product Images

Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

Print This Approval


#2011005

Range of combined pre-set temperature and pressure relief valves incorporating Bronze bodies, DZR brass seat and plunger, EPDM ‘O’-rings, PTFE seal and silicone diaphragm. The valves incorporate a manually operated lever easing gear. The valves are factory pre-set between 0.4 bar and 12.5 bar. Maximum operating temperature 90°C.

Section:
2030 Valves
Section Subtitle:
Combined thermal and pressure relief.
WRAS Approval Number:
2011005
Size:
½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 2 ½” BSP (M) inlet/BSP (F) outlet
Marking:
SEETRU, date of assembly (DD/MM/YY), pressure rating, size, model and flow arrow on body. CR on inlet connector.
Installation Requirements:
R001
Expiry date:
30/11/2025
Model:
LGS P&T DN15 ½”, LGS P&T DN20 ¾” LGS P&T DN25 1” LGS P&T DN32 1 ¼” LGS P&T DN40 1 ½” LGS P&T DN50 2” LGS P&T DN65 2 ½” All valves can be factory set between 0.4 to 12.5 bar with various springs.
Product Images

Approval Holder:
Seetru Limited
Company Name
Seetru Limited
Address
Albion Dockside Works Bristol
Postcode
BS1 6UT
Country
United Kingdom
Phone
01179306137
General Email
jason.carter@seetru.com

View All Listings by this Company
Manufacturer:
Seetru Limited
Company Name
Seetru Limited
Address
Albion Dockside Works Bristol
Postcode
BS1 6UT
Country
United Kingdom
Phone
01179306137
General Email
jason.carter@seetru.com

View All Listings by this Company

Print This Approval


#2011081

Combined temperature and pressure relief valve incorporating a gunmetal body and manually operated lever-type easing gear. Factory set at 7.0 bar. Maximum operating temperature 95°C.

Section:
2030 Valves
Section Subtitle:
Combined thermal and pressure relief.
WRAS Approval Number:
2011081
Size:
15mm compression inlet x ½” BSP outlet
Marking:
RWC and technical information on cap. Flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/11/2025
Model:
PTEM200009
Product Images

Approval Holder:
Reliance Worldwide Corporation
Company Name
Reliance Worldwide Corporation
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2012333

Range of ‘J2 10 series’ of equilibrium float valves with cast iron (epoxy coated) bodies and EPDM seals. Available with either standard or extended arms. Maximum working pressure 10 bar. Cold water use only.

Section:
2100 Valves
Section Subtitle:
Float operated, equilibrium, metal.
WRAS Approval Number:
2012333
Size:
See model.
Marking:
Bayard by Talis, model & technical information on adhesive label on body.
Installation Requirements:
R001 R280
Expiry date:
31/12/2025
Model:
J2 10 series Extended lever arms FH015500 – DN50 flanged inlet FH015501 – DN80 flanged inlet FH015502 – DN100 flanged inlet FH015504 – DN150 flanged inlet Standard lever arms WA015610 – DN50 flanged inlet WA015710 – DN65 flanged inlet WA015810 – DN80 flanged inlet WA015910 – DN100 flanged inlet WA016100 – DN150 flanged inlet
Product Images

Approval Holder:
Talis-UK Ltd
Company Name
Talis-UK Ltd
Address
Brackla Industrial Estate Bridgend Mid Glamorgan
Postcode
CF31 2AX
Country
United Kingdom
Phone
0845 077 9797
General Email
enquiries@talis-group.com

View All Listings by this Company
Manufacturer:
Bayard
Company Name
Bayard
Address
4 Avenue Lionel Terray, 69330, Meyzieu
Country
France
General Email

View All Listings by this Company

Print This Approval


#2010005

Range of flow control valves with blue epoxy coated ductile Iron bodies and EPDM ‘O’-rings. Auxiliary components include stainless steel tube with fittings and ball valves. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
2165 Valves
Section Subtitle:
Flow control, pilot operated control.
WRAS Approval Number:
2010005
Size:
DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300.
Marking:
ACMO logo, PN, DN, GJS, Flow arrow. On body. Product info on Adhesive label.
Installation Requirements:
R001
Expiry date:
31/10/2025
Model:
879 Series
Product Images

Approval Holder:
AC.MO S.r.l.
Company Name
AC.MO S.r.l.
Address
Via T. Da Modena, 28 Roncade
Postcode
31056
Country
Italy
General Email
info@acmospa.com

View All Listings by this Company
Manufacturer:
AC.MO S.r.l.
Company Name
AC.MO S.r.l.
Address
Via T. Da Modena, 28 Roncade
Postcode
31056
Country
Italy
General Email
info@acmospa.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 22 of 852

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.