Directory Search Results

Print List

#250655008

'Lettergold External Leak Sealer'. Clear silicone sealant. Apply as per manufacturer's TDS 'Version 1', dated '16/07/2025'. Cure for 96 hours@23°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5440 Sealants - Flat Faced Joints
Section Subtitle:
General.
WRAS Approval Number:
250655008
Expiry date:
30/06/2030

Approval Holder:
Lettergold Plastics Limited
Company Name
Lettergold Plastics Limited
Address
Unit 4 Hammond Close, Newmarket, Suffolk
Postcode
CB8 0AZ
Phone
+44 (0) 1638 666888
General Email
info@lettergold.co.uk

View All Listings by this Company

Print This Approval


#250555033

‘Grilamid TR 30 natural, TR 30 LS natural (appear colourless, translucent), TR 30 LS blue 4345, TR 30 LS blue 4387 & TR 30 LS blue 4396 (blue coloured)’. Injection moulded, PA 61/X materials. For use with water up to 85°C.

Section:
5585 Thermoplastic Moulding Compound
Expiry date:
31/05/2030

Approval Holder:
EMS-CHEMIE AG
Company Name
EMS-CHEMIE AG
Address
Via Innovativa 1, CH-7013 Domat/Ems
Country
Switzerland
Phone
+41 81 632 78 78
General Email
welcome@emsgrivory.com

View All Listings by this Company

Print This Approval


#251102002

Range of side entry BS1212-4 (2016), delayed action or non-delayed action type float operated valves for WC flushing cisterns. The inlet incorporates an optional flow restrictor. Maximum working pressure 10.0 Bar Maximum operating temperature Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
251102002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Model B3230 can be supplied with either a brass or plastic ½” connection, a plastic 3/8” connection and either delayed or non-delayed action type float valve.
Size:
3/8” BSP (M) 1/2” BSP (M) (brass or plastic inlet connection)
Marking:
WDI, Model number, WRAS, BS1212-4 and datum level on valve body
Installation Requirements:
R001 R550
Expiry date:
30/11/2030
Model:
B3230

Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#250602712

Concealed WC dual flushing cistern with a vertical BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 Bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
250602712
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
My life, Wras and model number on cistern, 6 Litre mark inside cistern.
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2030
Model:
MLSOLCC
Product Images

Approval Holder:
MyLife Bathrooms Limited
Company Name
MyLife Bathrooms Limited
Address
Greenbank Industrial Estate Rampart Road Newry Co. Down BT342QU Ireland

View All Listings by this Company

Print This Approval


#250602901

Section:
0531 Combination Tap Assemblies
Description:
A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)
Wall Mounted Supplied with offset unions Undefinable Air Gap - See IRN's
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R030
Expiry date:
30/06/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
71 440 xx0Various1/2" BSP (M)10 bar60 °CHansgrohe Operating MemberYesCeramic cartridgeNot ApplicableAerator
71 450 xx0Various1/2" BSP (M)10 bar60 °CHansgrohe Operating MemberYesCeramic cartridgeNot ApplicableAerator

Notes & Further Information

Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2092 of 2345

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.