Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250408018

PVC flexible hose assembly for use with washing machines. Maximum working pressure 10.0 Bar. Cold water use only – not for wholesome water use.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 250408018
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Not for wholesome water use.
Size:: ¾” x ¾” BSP captive nut
Marking:: Manufacturers name and product info on hose
Installation Requirements:: R001 R008
Expiry date:: 30/04/2030
Model:: WL-025-01-NC

Manufacturer:: Guangdong Willer electrical technology Co Ltd

Company Name
Guangdong Willer electrical technology Co Ltd
Address
No. 3-1 West Ring Road, South District; Zhongshan Guangdong;
Country
China

View All Listings by this Company

WRAS Approval Number: #250404005

Range of stainless steel or polymeric braided, PERT and LDPE lined flexible hose assemblies with EPDM O-rings. Available with a variety of end connections for each size and model. Compression connection to be used with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 250404005
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: TUCAI, NT, WRAS, DN, YY (year of manufacture)
Installation Requirements:: R001 R008
Expiry date:: 30/04/2030
Model:: TAQ SLIM DN6 a mix of PERT and LDPE inner flexible hose OD (outer diameter) 8.3mm, stainless steel braided assemblies with a variety of end connections. TAQ SLIM ACB DN6 a mix of PERT and LDPE inner flexible hose OD (outer diameter) 8.3mm, polymeric braided (ACB) assemblies with a variety of end connections TAQ SLIM BB DN6 a mix of PERT and LDPE inner flexible hose OD (outer diameter) 10mm = BB, stainless steel braided assemblies with a variety of end connections TAQ SLIM BB ACB DN6 a mix of PERT and LDPE inner flexible hose OD (outer diameter) 10mm = BB, polymeric braided (ACB) assemblies with a variety of end connections Fittings for all above models: M8X1 M10X1 M11X1 M12X1 M15X1 9/16-24UNEF 1/2-14NPSM G3/8 G1/2 5/16-24UNF LISO6 LISO8 LISO10 CLIP 9 CLIP 10 CLIP 11 BICO8 BICO10

Approval Holder:: Tucai, S.A.

Company Name
Tucai, S.A.
Address
Llobateras, 10-12. Polígono Industrial Santiga, 08210 Barberà del Vallès (Barcelona)
Country
Spain
Phone
+34 93 718 95 62
General Email
info@tucai.com

View All Listings by this Company
Manufacturer:: Ningbo Tucai Flexible Pipe Co., Ltd.

Company Name
Ningbo Tucai Flexible Pipe Co., Ltd.
Address
No. 1 Beixing Road, Mazhu Town Yuyao, Zheijiang, 31450
Country
China
General Email

View All Listings by this Company

WRAS Approval Number: #250804007

Range of flexible hoses assemblies incorporating a braided outer with TPSiV liner and various brass end connections. Maximum operating temperature 85°C. Open outlet use only.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 250804007
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Marking:: FQR , date of manufacture (YY), nominal diameter & WRAS on ferrule.
Installation Requirements:: R001
Expiry date:: 31/08/2030
Model:: P6K, P6KL, P6KZ - DN6 available with the following end connection options: 8X1, 10x1, 12X1, 15x1, 14x1, F1/2, F15X1, F14X1, M3/8, F3/8 conical, F1/2 conical & T8. P9K, P9KL, P9KZ - DN8 available with the following end connection options: 10x1, 12X1, 15x1, 14x1, F1/2, F15X1, F14X1, M3/8, F3/8 conical, F1/2 conical & T8.

Approval Holder:: F.Q.R. Frattini S.R.L.

Company Name
F.Q.R. Frattini S.R.L.
Address
Via Per Borgomanero 71 Briga Novarese (No)
Postcode
28010
Country
Italy
Phone
+39 0322 94100
General Email
fqr3@fqrfrattini.com

View All Listings by this Company

WRAS Approval Number: #250412002

Range of stainless steel or nylon braided, PEX lined flexible hose assemblies with various brass end connections. Maximum working pressure 10.0 Bar. Maximum operating temperature 85 °C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 250412002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Justlink, WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001 R008
Expiry date:: 30/04/2030
Model:: JL – A*B – XX – D – 2 – XXX Where model = JL – Connection A * Connection B – DN – Outer braided material – Inner tube material – Length JL = abbreviation of manufacturer’s company name Jianglin. A*B = Connection A and Connection B. XX = DN (Dimension from 06 to 10): DN6 = 06, DN8 = 08, DN10 = 10. D = Outer braided material, SS = stainless steel wire, SN = stainless steel wire plus black nylon wire, N = Nylon Braided. Inner tube material, 2 = PEX XXX = Length (15cm to 200cm) 015 = 15cm … 200 = 200cm For example: JL-09*11-08-SS-2-045 would be for F1/2 x F1/2 elbow, DN8, stainless steel braided, PEX inner tube, 45cm long. DN6 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12‐110) with single O‐ring 20= M10*(12‐110) with single O‐ring 21= M11*(12‐110) with single O‐ring 22= M12*(12‐110) with single O‐ring 24= M15*(12‐110) with single O‐ring 26= F15 29= 10mm compression fitting 30= 12mm compression fitting 31= 15mm compression fitting 33= 15mm isolation valve 35= 10mm pushfit 36= 12mm pushfit 37= 15mm pushfit 39= 10mm pushfit isolation valve 40= 12mm pushfit isolation valve 41= 15mm pushfit isolation valve 45= M8*(12‐110) with double O-ring 46= M10*(12‐110) with double O-ring 47= M11*(12‐110) with double O-ring 48= M12*(12‐110) with double O-ring 50= M15*(12‐110) with double O-ring DN8 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 19= M8*(12‐110) with single O‐ring 20= M10*(12‐110) with single O‐ring 21= M11*(12‐110) with single O‐ring 22= M12*(12‐110) with single O‐ring 24= M15*(12‐110) with single O‐ring 26= F15 29= 10mm compression fitting 30= 12mm compression fitting 31= 15mm compression fitting 33= 15mm isolation valve 35= 10mm pushfit 36= 12mm pushfit 37= 15mm pushfit 39= 10mm pushfit isolation valve 40= 12mm pushfit isolation valve 41= 15mm pushfit isolation valve 45= M8*(12‐110) with double O-ring 46= M10*(12‐110) with double O-ring 47= M11*(12‐110) with double O-ring 48= M12*(12‐110) with double O-ring 50= M15*(12‐110) with double O-ring DN10 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 20= M10*(12‐110) with single O‐ring 21= M11*(12‐110) with single O‐ring 22= M12*(12‐110) with single O‐ring 24= M15*(12‐110) with single O‐ring 30= 12mm compression fitting 31= 15mm compression fitting 33= 15mm isolation valve 35= 10mm pushfit 36= 12mm pushfit 37= 15mm pushfit 39= 10mm pushfit isolation valve 40= 12mm pushfit isolation valve 41= 15mm pushfit isolation valve 46= M10*(12‐110) with double O-ring 47= M11*(12‐110) with double O-ring 48= M12*(12‐110) with double O-ring 50= M15*(12‐110) with double O-ring

Approval Holder:: Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road Yuhuan Economic Development Zone Yuhuan Zhejiang
Postcode
317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company
Manufacturer:: Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road Yuhuan Economic Development Zone Yuhuan Zhejiang
Postcode
317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company

WRAS Approval Number: #250412004

Stainless steel braided hose incorporating an EPDM liner and NBR ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 250412004
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: B404-A 1/2” BSP (F) X M10*1 B405-A 3/8” BSP (F) X M10*1
Marking:: Jiasiya, WRAS & year of production (YYYY) on nut.
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: B404-A B405-A

Approval Holder:: Kaiping Jiasiya Sanitary Ware Co, Ltd.

Company Name
Kaiping Jiasiya Sanitary Ware Co, Ltd.

View All Listings by this Company