Directory Search Results

Print List

#2306060

Range of wall mounted combination boilers providing domestic hot water via a plate heat exchanger and pressurised central heating system. The primary circuit incorporates a pressure relief valve set at 3.0 bar and an expansion vessel. The products are supplied with a temporary filling loop which incorporates a combined isolation valve and double check valve assembly (suitable for backflow protection against Fluid Category 3), stainless steel braided EPDM lined flexible hose assembly and an isolation valve. The secondary circuit (DHW) incorporates a stainless-steel strainer. The primary circuit incorporates isolation valves on the flow and return. Maximum working pressures: DHW: 10.0 Bar CH:2.5 Bar Maximum operating Temperatures: DHW: 65.0°C CH: 85.0°C

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2306060
Size:
DHW: 15mm compression CH: 22mm compression
Marking:
Vailant on front cover. Vailant, Model,Pressure, Temperature and other information on adhesive label on rear of body
Installation Requirements:
R001 R140 R360
Expiry date:
30/06/2028
Model:
VUW 20/26CS/1-5 (N-GB) ecoTEC plus 826 VUW 25/32CS/1-5 (N-GB) ecoTEC plus 832 VUW 30/36CS/1-5 (N-GB) ecoTEC plus 836 VUW 30/40CS/1-5 (N-GB) ecoTEC plus 840 VUI 30/40CS/1-5 (N-GB) ecoTEC plus 940
Product Images

Approval Holder:
Vaillant GmbH
Company Name
Vaillant GmbH
Address
Berghauser Strasse, 40 D-42859 Remscheid
Country
Germany
Phone
Tel: +49 2191 182126

View All Listings by this Company
Manufacturer:
Vaillant Industrial UK Ltd
Company Name
Vaillant Industrial UK Ltd
Address
Nottingham Road Belper Derbyshire
Postcode
DE56 1JT
Phone
01773 824141

View All Listings by this Company

Print This Approval


#2303365

Range of flow and temperature sensors with gunmetal bodies and EPDM ‘O’-rings Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1505 Water Meters
Size:
¾” BSP (M) - 2 3/8” BSP (M).
Marking:
Kemper logo and flow arrow on body. Kemper on cover.
Installation Requirements:
R001
Expiry date:
31/03/2028
Model:
Control-Plus range: 1384G0XX00, 1386G0XX00. XX stands for 10, 15, 20, 25, 32, 40 or 50 related to the dimension of the sensor.
Product Images

Approval Holder:
Gebr. Kemper GmbH+Co. KG
Company Name
Gebr. Kemper GmbH+Co. KG
Address
Harkortstr. 5 57462 Olpe Germany
Phone
+49 2761 8910
General Email
info@kemper-olpe.de

View All Listings by this Company

Print This Approval


#2212096

Range of water meters with brass bodies, plastic turbines and EPDM washers. Inlets incorporate a plastic filter. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 50°C

Section:
1505 Water Meters
Size:
DN15 – DN 40 - ¾” – 2” Male BSP, DN 50 – DN50 Flange.
Marking:
GAER Brand logo and other technical info on meter face. GAER on cover. Size and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/12/2027
Model:
GMM DN15 – ¾” BSP (M), GMM DN 20 – 1” BSP (M), GMM DN 25 – 1 ¼” BSP (M), GMM DN 32 - 1 ½” BSP (M), GMM DN 40 - 2” BSP (M), GMM DN 50.

Approval Holder:
Hidroglobal Tecnologia del Agua S.A.
Company Name
Hidroglobal Tecnologia del Agua S.A.
Address
C/ GARBÍ 3 Pol.Ind. Can Volart PARETS DEL VALLÈS
Postcode
08150
Country
Spain
Phone
+34 93 573 74 00
General Email
acalderon@regaber.com

View All Listings by this Company

Print This Approval


#2305058

Range of water meters with brass (CW724R & CC770S) and plastic (Composite) bodies, incorporating plastic strainers and EPDM ‘O’- rings. Maximum working pressure 16.0 Bar. Temperature: 60.0°C for brass (CW724R & CC770S) models & Cold water use only for composite models.

Section:
1505 Water Meters
Size:
DN15 – 3.4” BSP (M), DN20 – 1” BSP (M), DN25 – 1.1/4” BSP (M) or DN25 Flanged, DN32 – 1.1/2” BSP (M) or DN32 Flanged, DN40 – 2” BSP (M) or DN40 Flanged.
Marking:
Hydrus, Diehl Metering and product info on casing. Flow arrow on body and cover.
Installation Requirements:
R001
Expiry date:
31/05/2028
Model:
HYDRUS 2 (CW724R): DN15 – Lengths 110, 165 & 170mm, DN20 – Lengths 105, 130, 165, 175, 190 & 220mm, DN25 – Lengths 135, 150, 175 & 260mm, DN32 – Length 260mm, DN40 – Lengths 200 & 300mm. HYDRUS 2 (CC770S): DN25 – Length 260mm, DN32 – Length 260mm, DN40 – Length 300mm. HYDRUS 2 (Composite): DN15 – Lengths 110, 115, 165 & 170mm, DN20 – Length 190mm.
Product Images

Approval Holder:
Diehl Metering GmbH & Diehl Metering Poland.
Company Name
Diehl Metering GmbH & Diehl Metering Poland.
Address
Industiestrasse 13 91522 Ansbach Germany

View All Listings by this Company
Manufacturer:
Diehl Metering GmbH & Diehl Metering Poland.
Company Name
Diehl Metering GmbH & Diehl Metering Poland.
Address
Industiestrasse 13 91522 Ansbach Germany

View All Listings by this Company

Print This Approval


#2301054

Re-circulation valve with a plastic body and EPDM O-rings. The product is supplied with a pressure relief valve set at 10.0 bar. Supplied with stainless steel braided EPDM line flexible hoses. Compression connection for use with copper pipe manufactured to BS EN1057. Maximum working pressure 9.5 Bar. Maximum operating temperature 82°C

Section:
1530 Miscellaneous Fittings
Size:
15mm compression inlet/outlet
Marking:
Navien, NSF, flow arrow on body
Installation Requirements:
R001
Expiry date:
31/01/2028
Model:
30029753 - NaviCirc
Product Images

Approval Holder:
KD Navien Co Ltd
Company Name
KD Navien Co Ltd
Address
4F Koami Bldg, 22 Gukhoe daero, 76-gil, Yeongdeungpo-gu, Seoul, 07238 Korea
Phone
+82 2 3489 2200
General Email
www.navien.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 207 of 454

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.