Directory Search Results

Print List

#2104553

'PMSP5072-M'. Factory applied, blue coloured vitreous enamel coating. Apply as per manufacturer's instructions 'PEM 37 edition 01' dated '14/12/2020'. Cure for 5 minutes@840°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2104553
Expiry date:
30/04/2026

Approval Holder:
Colorobbia Italia S.p.A.
Company Name
Colorobbia Italia S.p.A.
Address
Via Pietramarina 53, I-50053 Sovigliana-Vinci (Firenze)
Country
Italy

View All Listings by this Company

Print This Approval


#2104554

'PMSP5104-M'. Factory applied, blue coloured vitreous enamel coating. Apply as per manufacturer's instructions 'PEM 37 edition 01' dated '14/12/2020'. Cure for 5 minutes@840°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2104554
Expiry date:
30/04/2026

Approval Holder:
Colorobbia Italia S.p.A.
Company Name
Colorobbia Italia S.p.A.
Address
Via Pietramarina 53, I-50053 Sovigliana-Vinci (Firenze)
Country
Italy

View All Listings by this Company

Print This Approval


#2107554

"Bond-It Tanking Slurry". Site applied, grey coloured, two part (powder & water) cementitious waterproof coating. Mix and apply as per manufacturer`s instructions 'Version 9' dated 06/08/20. Cure for 12 days at 7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5038 Coatings, Paints & Linings
Section Subtitle:
Site applied concrete coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:
2107554
Expiry date:
31/07/2026

Approval Holder:
Seal It Services Ltd. T/A Bond It
Company Name
Seal It Services Ltd. T/A Bond It
Address
Unit G16, River Bank Way, Lowfields Business Park
Postcode
HX5 9DN
Country
Elland,
Phone
01422 315 300

View All Listings by this Company

Print This Approval


#2110506

`VANDEX BB 75`. Site applied, two part, grey coloured cementitious coating. Mix Part A (grey powder) with Part B (water) in a mass ratio of 5:1. Cure for 21 days@7°C. For use with water up to 23°C. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:
5042 Coatings, Paints & Linings
Section Subtitle:
Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:
2110506
Expiry date:
31/10/2026

Approval Holder:
Vandex Isoliermittel GmbH
Company Name
Vandex Isoliermittel GmbH
Country
Germany

View All Listings by this Company

Print This Approval


#2110507

`Vandex Unimotar 1`. Site applied, grey coloured, two part cementitious coating. Mix Part A (grey powder) with Part B (water) in a weight ratio of 25:3. Cure for 21 days@7°C. For use with water up to 23°C. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:
5042 Coatings, Paints & Linings
Section Subtitle:
Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:
2110507
Expiry date:
31/10/2026

Approval Holder:
Vandex Isoliermittel GmbH
Company Name
Vandex Isoliermittel GmbH
Country
Germany

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 204 of 701

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.