Directory Search Results

Print List

#241202710

Range of near boiling hot water dispensers with stainless steel tanks and flow is controlled via float switch. Maximum working pressure 3 Bar. Maximum operating temperature 98°C.

Section:
1380 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
241202710
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/8” BSP M inlet/outlet
Marking:
New Lanbiao logo on label on front of body. Model and product info on label on rear of body.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
51023, 51006, 51022-H, 51005-H, 51022-B, 51005-B
Product Images

Approval Holder:
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Company Name
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Address
JIAOXI INDUSTRIAL ZONE, QINGGANG, YUHUAN, TAIZHOU
Country
China

View All Listings by this Company

Print This Approval


#241215012

Range of ultrasonic water meters with brass or stainless steel bodies and plastic or stainless steel transducers. The SC-F models incorporate a spherical valve operated via a motor controlled by computer software. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
SC7 series: ¾” x ¾” BSP (M) (DN15), 1” x 1” BSP (M) (DN20), 1¼” x 1¼” BSP (M) (DN25), 1½” x 1½” BSP (M) (DN32), 2” x 2” BSP (M) (DN40). SC-F series: ¾” x ¾” BSP (M) (DN15), 1” x 1” BSP (M) (DN20), 1¼” x 1¼” BSP (M) (DN25).
Marking:
Weihai Ploumeter Co., Ltd. logo, WEIHAI PLOUMETER CO., LTD, Type (SC& or SC-F), DN size, Q3, Class , MAP, IP, Production date (YYYY.MM), battery expire date (YYYY.MM) and other technical information on meter face. Flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
SC7 series: Variants: SUS meter body and plastic transducer with communication cable, SUS meter body and plastic transducer without communication cable, Brass meter body and SUS transducer with communication cable, Brass meter body and SUS transducer without communication cable. SC-F series: Variants: Brass meter body and SUS transducer with communication cable, SUS meter body and plastic transducer without communication cable.
Product Images

Approval Holder:
Weihai Ploumeter Co., Ltd.
Company Name
Weihai Ploumeter Co., Ltd.
Address
No. 576 South of Torch Road, Huancui District, Weihai, Shandong Province
Country
China

View All Listings by this Company
Manufacturer:
Weihai Ploumeter Co., Ltd.
Company Name
Weihai Ploumeter Co., Ltd.
Address
No. 576 South of Torch Road, Huancui District, Weihai, Shandong Province
Country
China

View All Listings by this Company

Print This Approval


#241202051

Range of in-line water meters with stainless steel bodies Maximum working pressure 10.0 Bar. Maximum operating temperature 50.0°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
2” - 14” Flanges
Marking:
HSCMT on meter body and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
AQUA-W
Product Images

Approval Holder:
HSCMT CO., LTD.
Company Name
HSCMT CO., LTD.
Address
103, 16-25, Dongbaekjungang-ro 16beon-gil, Giheung-gu, Yongin-si, Gyeonggi-do, Republic of Korea
Phone
+82-31-702-0402
General Email
cmsonic@hsmct.co.kr

View All Listings by this Company

Print This Approval


#241204028

Range of water meter manifolds with plastic bodies. The inlets incorporate a spherical valve. Models ending in ‘CGDM’ incorporate a single check valve cartridge and models ending in ‘CGDCVDM’ incorporate two, single check valve cartridges however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (F) & 2” BSP (F).
Marking:
Atplas logo on body.
Installation Requirements:
R001 R008
Expiry date:
31/12/2029
Model:
MB40403036CGDM Matrix. MB40403034CGDM Matrix. MB40408036CGDM Matrix. MB40408034CGDM Matrix. MB40408036CGDCVDM Matrix. MB40408034CGDCVDM Matrix.
Product Images

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval


#241204036

Range of water meter manifolds with plastic bodies, incorporating plastic pushfit inlets and plastic pushfit outlets. The inlets incorporate a spherical ball valve. Models MB40408256DCVDM & MB40408254DCVDM incorporate two single check valve cartridges, all other models incorporate one single check valve however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see models
Marking:
Atplas logo and flow arrow on inlet and outlet.
Installation Requirements:
R001 R008
Expiry date:
31/12/2029
Model:
MB40425256DM 25mm x 25mm MB40425254DM 25mm x 25mm MB40432326DM 32mm x 32mm MB40432324DM 32mm x 32mm MB40408256DM 2” x 25mm MB40408254DM 2” x 25mm MB40408326DM 2” x 32mm MB40408324DM 2” x 32mm MB40408256DCVDM 2” x 25mm MB40408254DCVDM 2” x 25mm
Product Images

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2018 of 2264

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.