Range of vertical multistage booster pumps, with stainless steel bodies and impellors (AISI304 or 316 see model). Maximum working pressure (model dependent): 4.0 bar models: BMVET(I) 32-10-1 to BMVET(I) 32-40. BMVET(I) 42-10-1 to BMVET(I) 42-20. BMVET(I) 65-10-1 to BMVET(I) 65-20-2. BMVET(I) 85-10-1 to BMVET(I) 85-10. 10.0 bar models: BMVET(I) 1-2 to BMVET(I)1-36. BMVET(I) 2-2 to BMVET(I) 2-11. BMVET(I) 3-2 to BMVET(I) 3-29. BMVET(I) 4-2 to BMVET(I) 4-10. BMVET(I) 8-2 to BMVET(I) 8-20. BMVET(I) 12-2 to BMVET(I) 12-18. BMVET(I) 16-2 t BMVET(I) 16-16. BMVET(I) 20-1 to BMVET(I) 20-17. BMVET(I) 32-50-2 to BMVET(I) 32-100. BMVET(I) 42-30-2 to BMVET(I) 42-50. BMVET(I) 65-20-1 to BMVET(I) 65-30. BMVET(I) 85-20-2 to BMVET(I) 85-30-2. 15.0 bar models: BMVET(I) 2-13 to BMVET(I) 2-26. BMVET(I) 3-31 to BMVET(I) 3-36. BMVET(I) 4-12 to BMVET(I) 4-22. BMVET(I) 32-110-2 to BMVET(I) 32-140. BMVET(I) 42-60-2 to BMVET(I) 42-130-2. BMVET(I) 65-40-2 to BMVET(I) 65-80-1. BMVET(I) 85-30-1 to BMVET(I) 85-60. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2009028

Size:

DN25 (Pumps with 1, 2 or 3 m³/h rated flow rates). DN32 (Pumps with 4 m³/h rated flow rates). DN40 (Pumps with 8 m³/h rated flow rates). DN50 (Pumps with 12, 16 or 20 m³/h rated flow rates). DN65 (Pumps with 32 m³/h rated flow rates). DN80 (Pumps with 42 m³/h rated flow rates). DN100 (Pumps with 65 or 85 m³/h rated flow rates).

Marking:

EFAFLU and other technical information on data plate. Flow arrow, PN and DN on body.

Installation Requirements:

R001 R415

Expiry date:

30/09/2025

Model:

BMVE T X - Y - Z. BMVE TI X - Y - Z. Model key: BMVE = Pump series name. T = Stainless Steel AISI304. TI = Stainless Steel AISI316. X = rated flow rate in m³/h (1, 2, 3, 4, 8, 12, 16, 20, 32, 42, 65, 85). Y = number of stages (2-140). Z = number of small impellors (blank, 1 or 2).

Product Images

Approval Holder:

EFAFLU BOMBAS E VENTILADORES S.A

Company Name

EFAFLU BOMBAS E VENTILADORES S.A

Phone

+351 252 298 700

General Email

geral@efaflu.pt

View All Listings by this Company

CM(E)(C) range of electronically operated pumps available in stainless steel, (‘EN 1.4301/AISI304’ or ‘EN 1.4401 /AISI316’) and cast iron. (CMEC models were added October 2023). The pumps are supplied with Sic-Sic mechanical shaft seals and FKM or EPDM seals. Cast iron models: Maximum working pressure 10.0 bar. Cold water use only. Stainless steel models: Maximum working pressure 16.0 bar. Maximum operating temperature 60°C for self-priming models, 99°C for all other models.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2011907

Size:

1” - 2” BSP (F) or NPT inlet and outlet.

Marking:

Grundfos and Grundfos logo, type, model and technical information on adhesive label either on the terminal box or fan cover.

Installation Requirements:

R001 R415

Expiry date:

30/11/2025

Model:

CM(E)(C)1, CM(E)(C)3 and CM(E)(C)5: CM(E)(C)1, cast iron / AISI304 2 – 8 stages. CM(E)(C)3, cast iron / AISI304 2 – 8 stages. CM(E)(C)5, cast iron / AISI304 2 – 8 stages. CM(E)(C)1, AISI316 2 - 14 stages. CM(E)(C)3, AISI316 2 - 14 stages. CM(E)(C)5, AISI316 2 - 13 stages. CM(E)(C)10 CM(E)(C)15 and CM(E)(C)25: CM(E)(C)10, cast iron / AISI304 1 – 5 stages. CM(E)(C)15, cast iron / AISI304 1 – 4 stages. CM(E)(C)25, cast iron / AISI304 1 – 4 stages. CM(E)(C)10, AISI316 1 – 8 stages. CM(E)(C)15, AISI316 1 – 4 stages. CM(E)(C)25, AISI316 1 – 4 stages. Self-priming models: CM(E)1, AISI316 3 – 6 stages (S or O) CM(E)3, AISI316 3 – 6 stages (S or O) CM(E)5, AISI316 3 – 7 stages (S or O) Model key: CM/CME/CMEC X1-X2 X3 X4-X5-X6-X7-X8 X9 X10 X11 X11-X12-X13-X14 Where: CM = Centrifugal Modular. CME = Centrifugal Modular with integrated frequency converter. CMEC = Centrifugal Modular with integrated frequency converter and only core functions of the motor unit. (NOTE: CMEC models were added October 2023). X1 = Rated flow rate at 50 Hz (m³/h): 1-25. X2 = Number of impellers: 1-14. X3 = Pump Versions: A - Basic Version. E: Pumps with certificates/approvals. O: Self-priming version (maximum suction lift 8 metres). S: Self-priming version (maximum suction lift 4 metres). X4 = Pipe connection: R: Rp (ISO 7/1). S: Internal Npt thread. X5 = Material in contact with pump media: A: inlets and outlets parts EN-GJL-200, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. G: Sleeve, Pump shaft + Impellers and chambers EN 1.4401/AISI 316. I: Sleeve, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. X6 = Rubber parts in pump (excluding neck ring and shaft seal): E: EPDM. V: FKM. X7 = Shaft seal: A: O-ring seal with fixed driver. X8 = Material of rotating seal face: Q: Silicon Carbide (SIC). X9 = Material of stationary seal face: Q: Silicon Carbide (SIC). X10 =Material of secondary seal: E: EPDM. V: FKM. X11 = Supply voltage: B/B1/C/D/E/E1/F/G/H/I/J/O/S/T/U/V/X. X12 = Motor information: A/B/C/D/EF/G/H/I/J. X13 = Mains plug: A/B/C/D. X14 = Sensor: N: No sensor. Example: CM 10-3 A-R-I-E-A Q Q E C-A-A-N

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of submersible pumps with stainless steel bodies, impellers and shaft. The XPW range incorporates a strainer cowl on the suction end of the pump. The XPWA range features a stainless head which provides a threaded connection instead of the strainer. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2011326

Size:

XPW: 1¼” BSP (F). XPWA: 1¼” BSP (F) x 1½” BSP (F).

Marking:

Dutypoint, model and other technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2025

Model:

(XPW)(i)(ii)-(iii) and (XPWA)(i)(ii)-(iii) ranges. Where: XPW or XPWA = range name. (i) = Nominal flow in m³/h x 10 (3, 5 or 9). (ii) = Number of stages x 10 (040-100). (iii) = Voltage/motor speed (M = single phase 230V, T = Three phase 400V, T230 = Three phase 230V. All of which can also be prefixed with 6 for 60Hz motor speed. Std. is 50Hz). Example codes: XPW3040-M & XPWA9090-T230.

Product Images

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Range of inline circulating pumps with bronze bodies, plastic impeller and EPDM rubber seals. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2106803

Size:

Please refer to model.

Marking:

WILO, PN, flow arrow, serial number, date of manufacture (YYWW) and other technical information on body.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

STAR-Z 20/1 - 1” BSP (M). STAR-Z 25/2 - 1½” BSP (M). STAR-Z 20/2-3(15-130) - 1” BSP (M). STAR-Z 20/4-3(150) - 1¼” BSP (M). STAR-Z 20/5-3(150) - 1¼” BSP (M). STAR-Z 25/6 - 1½” BSP (M). STAR-Z 20/7-3(150) - 1¼” BSP (M). STAR-ZD 25/6 - 1½” BSP (M).

Approval Holder:

Wilo

Company Name

Wilo

Address

80 BD de I'industrie, BP0527 - 53005 Laval, Cedex

Country

France

View All Listings by this Company

Dutypoint ‘VS’ range of cold water supply booster sets, incorporating 2 to 8 pumps with a modular stainless steel manifold system. The booster sets also incorporate spherical valves, non-return valves, pressure switches/sensors and expansion vessels.. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2011357

Size:

DN80 flanged inlet/outlet.

Marking:

Dutypoint logo, model no, serial no, company address and other technical information on control box.

Expiry date:

30/11/2025

Model:

VS(i)-(ii)-(iii)(iv)(v) VS = Product range prefix (i) = Number of pumps: 2, 3, 4, 6 or 8 (6 and 8 pump variants will be 2 x 3 pump units or 2 x 4 pump units coupled together). (ii) = Pump Model (4 digits): 3040, 3060, 3080, 3100, 5040, 5060, 5080, 5100, 9040, 9060, 9070 & 9090. (iii) Motor kW size (multiplied by 10): 005, 007, 011, 015, 022, 030. (iv) Power supply type: M (single phase) or T (three phase). Model code example: VS4-9090-030T.

Product Images

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Manufacturer:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Range of positive displacement diaphragm pumps with plastic bodies, EPDM ‘O’-rings and TPE diaphragm. The product incorporates an integral bypass relief valve. For use with John Guest LLDPE Pipe. Maximum working pressure 11.03 Bar (Bypass) and 7.0 Bar (Operating).

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2011067

Size:

¼” Push fit.

Marking:

AQUATEC and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

584X-2X0W (without motor). 584X-2X0W-XXXX (with motor) Model Code Denotes: 1st & 2nd designators = 58 - Series Demand Delivery Pumps. 3rd designator is port size for pumphead housing, where ‘4’ = ¼”. 4th designator is cam angle for flow performance variation only. X can be 0 to 9. 5th designator ‘2’ indicates that pump has bypass relief control. 6th designator is for pressure setting of relief valve. X can be A to Z depending on pressure setting. 7th designator ‘0’ is a code for the specific materials in this model, e.g. Nylon pumphead housing. 8th designator ‘W’ = WRAS Compliant 9th - 12th designators XXXX can be any alphanumeric characters to denote electrical motor and motor mounting base plate combination.

Product Images

Approval Holder:

Aquatec International Inc

Company Name

Aquatec International Inc

Address

17422 Pullman Street, Irvine, CA 92614, U.S.A.

View All Listings by this Company

Manufacturer:

Aquatec International Inc

Company Name

Aquatec International Inc

Address

17422 Pullman Street, Irvine, CA 92614, U.S.A.

View All Listings by this Company

Range of pumps with either brass or stainless-steel bodies, stainless steel impellor and NBR ‘O’ rings. 20 & 33 brass series have a maximum working pressure of 16.0 bar. 33 stainless-steel series has a maximum working pressure of 20.0 bar. 22, 24 ,26, 38, 31, 32 & 34 series have a maximum working pressure of 20.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2101029

Size:

Please refer to model.

Marking:

Fluid-o-tech, logo and other technical info on adhesive label. Fluid-o-tech logo and flow arrow on body.

Installation Requirements:

R001 R415

Expiry date:

31/01/2026

Model:

20 series – Brass - TW030, TW031, TW034, TW034Z, TW050, TW051, TW054, TW054Z, TW070, TW071, TW074,TW074Z, TW100, TW101, TW104, TW104Z, TW150, TW151, TW154, TW154Z, TW180, TW181, TW184, TW184Z,TW200 , TW201, TW204, TW204Z – 3/8” GAS or 3/8” NPT (F) Inox - TW0310, TW0311, TW0314, TW0314Z, TW0510, TW0511, TW0514, TW0514Z, TW0710, TW0711,TW0714, TW0714Z, TW110, TW111, TW114, TW114Z, TW1510, TW1511, TW1514, TW1514Z, TW1810, TW1811,TW1814, TW1814Z, TW210, TW211, TW214, TW214Z – 3/8” GAS or 3/8” NPT (F) 22 series – Brass – PW070, PW071, PW071X, PW074, PW074Z, PW074X, PW074XZ, PW100, PW101, PW101X,PW104, PW104Z, PW104X, PW104XZ, PW150, PW151, PW151X, PW154, PW154Z, PW154X, PW154XZ, PW200,PW201, PW201X, PW204, PW204Z, PW204X, PW204XZ, PW250, PW251, PW251X, PW254, PW254Z, PW254X,PW254XZ, PW300, PW301, PW301X, PW304, PW304Z, PW304X, PW304XZ, PW350, PW351, PW351X, PW354, PW354Z,PW354X, PW354XZ, PW400, PW401, PW401X, PW404, PW404Z, PW404X, PW404XZ - 3/8” GAS or 3/8” NPT (F) Inox - PW0710, PW0711, PW0711X, PW0714, PW0714Z, PW0714X, PW0714XZ, PW110, PW111,PW111X, PW114 PW114Z, PW114X, PW114XZ, PW1510, PW1511, PW1511X, PW1514, PW1514Z, PW1514X,PW1514XZ, PW210, PW211, PW211X, PW214, PW214Z, PW214X, PW214XZ, PW2510, PW2511, PW2511X, PW2514,PW2514Z, PW2514X, PW2514XZ, PW310, PW311, PW311X, PW314, PW314Z, PW314X, PW314XZ, PW3510,PW3511, PW3511X, PW3514, PW3514Z, PW3514X, PW3514XZ, PW410, PW411, PW411X, PW414, PW414Z PW414X, PW414XZ - 3/8” GAS or 3/8” NPT (F) 24 series – Brass – CW031, CW034, CW034Z, CW051, CW054, CW054Z, CW071, CW074, CW074Z, CW101, CW104, CW104Z, CW151, CW154, CW154Z, CW181, CW184, CW184Z, CW201, CW204, CW204Z - 3/8” GAS or 3/8” NPT (F) 26 series – Brass – MW030, MW031, MW034, MW034Z, MW050, MW051, MW054, MW054Z, MW070, MW071, MW074,MW074Z, MW100, MW101, MW104, MW104Z, MW150, MW151, MW154, MW154Z, MW180, MW181, MW184,MW184Z, MW200, MW201, MW204, MW204Z - 3/8” GAS or 3/8” NPT (F) Inox - MW0310, MW0311, MW0314, MW0314Z, MW0510, MW0511, MW0514, MW0514Z, MW0710,MW0711, MW0714, MW0714Z, MW110, MW111, MW114, MW114Z, MW1510, MW1511, MW1514, MW1514Z, MW1810,MW1811, MW1814, MW1814Z, MW210, MW211, MW214, MW214Z - 3/8” GAS or 3/8” NPT (F)

28 series – Brass – PW500, PW501, PW504, PW600, PW601, PW604, PW700, PW701, PW704, PW800, PW801, PW804, PW900, PW901, PW904, PW1000, PW1001, PW1004 – 1/2” GAS or 1/2” NPT (F) Inox - PW510, PW511, PW514, PW610, PW611, PW614, PW710, PW711, PW714, PW810, PW811,PW814, PW910, PW911, PW914, PW1010, PW1011, PW1014 - 1/2” GAS or 1/2” NPT (F) 31 series – Inox -TSFRSS070AW, TSFRSS071AW, TSFRSS074AW, TSFRSS100AW, TSFRSS101AW,TSFRSS104AW, TSFRSS150AW, TSFRSS151AW, TSFRSS154AW, TSFRSS200AW, TSFRSS201AW,TSFRSS204AW, TSFRSS250AW, TSFRSS251AW, TSFRSS254AW, TSFRSS300AW, TSFRSS301AW,TSFRSS304AW, TSFRSS350AW, TSFRSS351AW, TSFRSS354AW, TSFRSS400AW, TSFRSS401AW, TSFRSS404AW - 3/8” NPT (F) 32 series – Brass – TMFROT030AW, TMFROT031AW, TMFROT034AW, TMFROT050AW, TMFROT051AW, TMFROT054AW, TMFROT070AW, TMFROT071AW, TMFROT074AW, TMFROT100AW, TMFROT101AW, TMFROT104AW, TMFROT150AW, TMFROT151AW, TMFROT154AW, TMFROT180AW, TMFROT181AW, TMFROT184AW, TMFROT200AW, TMFROT201AW, TMFROT204AW - 3/8” NPT (F) Inox - TMFRSS030AW, TMFRSS031AW, TMFRSS034AW, TMFRSS050AW, TMFRSS051AW, TMFRSS054AW, TMFRSS070AW, TMFRSS071AW, TMFRSS074AW, TMFRSS100AW, TMFRSS101AW, TMFRSS104AW, TMFRSS150AW, TMFRSS151AW, TMFRSS154AW, TMFRSS180AW, TMFRSS181AW,TMFRSS184AW, TMFRSS200AW, TMFRSS201AW, TMFRSS204AW - 3/8” GAS (F) 33 series – Brass – TW500, TW501, TW504, TW600, TW601, TW604, TW700, TW701, TW704, TW800, TW801, TW804, TW900, TW901, TW904, TW1000, TW1001, TW1004 – 1/2” GAS or 1/2” NPT (F) Inox - TW510, TW511, TW514, TW610, TW611, TW614, TW710, TW711, TW714, TW810, TW811, TW814, TW910, TW911, TW914, TW1010, TW1011, TW1014 – 1/2” GAS or 1/2” NPT (F) 34 series - Inox - TW310, TW311, TW314, TW410, TW0411, TW0414 - 3/8” GAS or NPT (F)

Product Images

Approval Holder:

Fluid-o-Tech (Italy) & Fluid-o-Tech Asia (Shanghai) Co. Ltd.

Company Name

Fluid-o-Tech (Italy) & Fluid-o-Tech Asia (Shanghai) Co. Ltd.

View All Listings by this Company

Manufacturer:

Fluid-o-Tech (Italy) & Fluid-o-Tech Asia (Shanghai) Co. Ltd.

Company Name

Fluid-o-Tech (Italy) & Fluid-o-Tech Asia (Shanghai) Co. Ltd.

View All Listings by this Company

Range of circulating pumps, with plastic or stainless steel bodies (cast EN 1.4308 or plate EN 1.4301) and a plastic impeller. Maximum working pressure 10.0 bar (stainless steel bodied pumps), 3.0 bar (plastic bodied pumps). Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2012924

Size:

Composite (plastic body) (15 models): 1” BSP (M). Stainless steel body (25 models): 1½” BSP (M).

Marking:

Grundfos and Grundfos logo, type, model, production no. and other technical info on adhesive label on end of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008

Expiry date:

31/12/2025

Model:

Composite (plastic body): UPM2 15-** CIL2. Stainless steel body: UPMM 25-** N 180. UPML 25-** N 180. UPMXL 25-** 180 N. UPM GEO 25-** N 180. UPML GEO 25-** 180 N. UPMXL GEO 25-** 180 N. SOLAR PML 25-** 180 N. ** -stands for the lifting height of the pump in dm, that can be various 2 or 3 digit numbers

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of single stage circulating pumps with plastic impellers and stainless steel housing, (red or black external coating, and from July 2023 a yellow external coating on the 1½" model with 130mm port length). From December 2023 the UPS25 prefix models can be supplied with EPDM inlet/outlet gaskets and the UPS32 prefix models can be supplied with fibre/NBR inlet/outlet gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C (s/steel plate EN 1.4301/1.4401 models) or 99°C (s/steel cast EN 1.4308 models).

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2012925

Size:

1¼” BSP (M) inlet/outlet (EN 1.4301 plate steel) - 150mm port length. 1½”-2” BSP (M) inlet/outlet (EN 1.4308 cast steel) - 180mm port length. DN40 flanged inlet/outlet (EN 1.4308 cast steel) - 250mm port length. Sizes added July 2023: 1¼” BSP (M) inlet/outlet (EN 1.4401 plate steel) - 150mm port length. 1¼” BSP (M) inlet/outlet (EN 1.4308 cast steel) - 150mm port length. 1½” BSP (M) inlet/outlet (EN 1.4308 cast steel) - 130mm port length.

Marking:

Grundfos, Grundfos logo, type, model, Production no., manufacturing country and other technical information on data plate on top of motor.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

UP(S) XX-XX N XXX. UP(S) XX-XX FN XXX. Where: UP = Range name. S = Pumps equipped with electronic speed control. 1st XX = Nominal diameter (DN) of suction and discharge ports (mm) - Threaded models: 20 (1¼”), 25 (1½”) or 32 (2”). Flanged model: 40. 2nd XX = Maximum Head (dm). (no letter) or F = connection type: no letter - threaded, F - flanged. N = Pump housing - Stainless Steel. XXX = Port length (mm) - 1¼": 150, 1½": 130 or 180, 2": 180, DN40: 250.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of booster sets with a stainless steel manifold system connecting 2 or 3 wholesome water pumps (For 2HELIX & 3HELIX models only). The set also includes spherical valves, and a non-return valve Maximum working pressure: 10.0 Bar Maximum operating temperature: 40°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2010071

Size:

1 ¼” BSP (F) on 1 HELIX (Centrum SV) or 2 ½” BSP (M) on 2HELIX (CENTRUM DV) and 3HELIX (CENTRUM TV).

Marking:

Wilo logo (see notes), model, PN, max temp, manufacturer and other technical info on adhesive label on pump body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2025

Model:

Wilo Model Codes: Wilo CENTRUM SV406, Wilo CENTRUM SV408, Wilo CENTRUM SV605, Wilo CENTRUM SV608, Wilo CENTRUM SV1004, Wilo CENTRUM SV1006, Wilo CENTRUM DV406, Wilo CENTRUM DV408, Wilo CENTRUM DV605, Wilo CENTRUM DV608, Wilo CENTRUM DV1004, Wilo CENTRUM DV1006, Wilo CENTRUM TV406, Wilo CENTRUM TV408, Wilo CENTRUM TV605, Wilo CENTRUM TV608, Wilo CENTRUM TV1004, Wilo CENTRUM TV1006.

Product Images

Approval Holder:

Wilo UK

Company Name

Wilo UK

Address

Second Avenue Centrum 100 Burton on Trent

Postcode

DE14 2WJ

Country

Staffordshire

View All Listings by this Company

Manufacturer:

Wilo UK

Company Name

Wilo UK

Address

Second Avenue Centrum 100 Burton on Trent

Postcode

DE14 2WJ

Country

Staffordshire

View All Listings by this Company