'Jerlac High Build Bituminous Black'. Factory applied, black coloured bituminous coating. Apply as per manufacturer's work instruction document 'GPC/WI/10' issue no. '01', dated 03/01/2018. Cure for 72 hours@30°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

250255052

Expiry date:

28/02/2030

Approval Holder:

M/S German Polymers and Coatings (PVTE) Limited

Company Name

M/S German Polymers and Coatings (PVTE) Limited

Address

No-18, Othivakkam Village Kumuzhi Panchayat, Chengalpet District, Pin-603202, Tami Nadu

Country

India

View All Listings by this Company

'Tuffkote Bituminous Aluminium'. Factory applied, grey coloured, two-component crude oil bitumen coating. Mix in a 17.1:2.9 volume ratio and apply as per manufacturer's data sheet 'SPL/PMG/2019100166', 'Rev 2', dated '04/2024'. Cure for 7 days@30°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

250355077

Expiry date:

31/03/2030

Approval Holder:

Shalimar Paints Ltd.

Company Name

Shalimar Paints Ltd.

Address

A1 & A2, UPSIDC Industrial Area, Sikandrabad, Distt. Bulandshahr, Sikandrabad, Uttar Pradesh, 203205

Country

India

View All Listings by this Company

'HT 204'. Grey coloured carbon bearing, pressed, sintered, impregnated with phenolic resin and rebaked. For use with water up to 85°C.

Section:

5022 Carbon

Expiry date:

31/03/2030

Approval Holder:

Eurocarbo S.p.A

Company Name

Eurocarbo S.p.A

Address

Via S. Scolastica 35, Corropoli, 64013

Country

Italy

Phone

0861 839020

General Email

info@eurocarbo.it

View All Listings by this Company

NY Blue PP. Blue coloured, factory applied nylon powder coating. Apply as per manufacturer's instructions for 'NY Blue PP nylon powder' dated 01-05-25, then post cure for 20 minutes@210°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5028 Coatings, Paints & Linings

Section Subtitle:

Factory applied metal coatings.

WRAS Approval Number:

250155076

Expiry date:

31/01/2030

Approval Holder:

Karna International

Company Name

Karna International

Address

Village Baloke, Bachan Singh Marg Haibowal Kalan Ludhiana (Punjiab)

Country

India

View All Listings by this Company

'EM6/35/7541/1'. Factory applied, dark blue coloured Porcelain (vitreous) enamel coating. Apply as per manufacturer's instructions 'IS_003', 'rev. 01'. Cure for 16 min 875°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250355074

Expiry date:

31/03/2030

Approval Holder:

Fiorini Industries S.r.l.

Company Name

Fiorini Industries S.r.l.

Address

Via Zampeschi n.119, CAP: 47122, Forlì (FC)

Country

Italy

View All Listings by this Company