Water Regulations Approval Scheme Ltd

Tubes

Section Code 1860 : Plastic hoses.

WRAS Approval Number: #240704011

Inlet hose consisting of a EPDM inner hose layer and corrugated outer cover. The hose is fitted with an integral device consisting of a water sensitive material which expands when in contact with water. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 240704011
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP captive nut
Marking:: Wuxi Jinhua, Model, WRAS, date of manufacture (YYYY) etched on hose cover.
Installation Requirements:: R001 R150
Expiry date:: 31/07/2029
Model:: GJS-FL-115HW - Aquastop inlet hose.

Product Images

Approval Holder:: Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Company Name
Wuxi Jinhua Yiyuan Technology Co.,Ltd.
Address
No. 3, Industrial Park Binhu District Wuxi City Jiangsu Province
Country
China

View All Listings by this Company
Manufacturer:: Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Company Name
Wuxi Jinhua Yiyuan Technology Co.,Ltd.
Address
No. 3, Industrial Park Binhu District Wuxi City Jiangsu Province
Country
China

View All Listings by this Company

WRAS Approval Number: #240902020

Range of TPE shower hoses (various finishes) with EPDM seals. Open outlet use only. Maximum operating temperature 60.0°C

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 240902020
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (F) Captive nut
Marking:: Axor on nut
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: 28 282 xx0 28 284 xx0 28 286 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #240402080

Range of stainless-steel interlocked shower hoses and shower hose extension pieces (smaller length versions) incorporating PE/EPDM and PEX inner tube materials. Available with various surface finishes and end connectors. For further details see model section. Maximum working pressure open outlet use. Maximum operating temperature 85.0°C

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 240402080
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP captive nut. M15x1. All connection sizes can be used with every model of hose.
Marking:: IW, WRAS & year of manufacture (YYYY) on connector
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: Model：IW-XXXXXXXX 1st X stands for out diameter: from 13mm to 17mm +/-0.3mm (PVC tube use size 14mm and 15mm) 2nd X stands for outer material: S=stainless steel, B=brass, P=PVC，(PVC outer tube only with PVC inside tube) 3rd X stands for the surface treatment: C=chrome plated, P=stainless steel natural color, B=black, S=sliver, G=Gold,/Gray 4th X stands for fittings material: B=brass, S=stainless steel, Z=Zinc Alloy P=ABS 5th X stands for fittings size and shape: 1/2’ 3/8’ M15x1, M16x1,(M15*1,M16*1 use brass material only use size 13mm and 14mm only) Fitting shape find the attached1. 6th X stands for hose nipple material: B=brass, S=stainless steel, P=POM, N=Nylon 7th X stands for inner tube material:, PVC, EPDM，PEX (EPDM,PEX, tube only use with stainless steel and brass out side) 8th X stands for hose length from 10cm to 300cm. 9th X stands for the fitting number end connection type), which can be a number from 1 to 29, or 51 to 72 with the prefix: Nut and suffix: #, (if different end connection types are used two numbers will be provided Size 1/2” 3/8” (only used for stainless steel outer material) Size M15*1 M16*1 ( use brass material only, use size 13mm and 14mm only) Limits: 1. Size 1/2”can use all fitting number except #51 2. Size 1/2” 3/8” can use #13 and #30， but they are only used for stainless steel outer material. 3. #30 is used for stainless steel outer material and surface treatment of stainless steel natural color Size M15*1 only use #51, M15*1,M16*1 use size 13mm and 14mm only 4. ABS is only used in fitting size of 1/2’ 5. Only 14mm diameter is used nipple materials of stainless steel，POM and Nylon；other diameter only used brass material 6. EPDM,TPE tube only use with stainless steel and brass out side Model code example: IW-17SCB1/2”1/2”SPEX150 Nut 4# & 16#. This gives a 17mm hose with stainless steel interlocked outer, chrome surface finish, brass fittings, ½” end connections at each end, stainless steel nipples, PEX hose inner, 150cm length, end connections type Nut number 4 and 16.

Approval Holder:: Innowin International Co., LTD

Company Name
Innowin International Co., LTD
Address
No.377 Sec 3 Chang Tsao Road
Country
Taiwan

View All Listings by this Company

WRAS Approval Number: #241002016

Range of stainless-steel or nylon braided hoses with a PEX inner hose. The hoses are either supplied with silicone or EPDM 'O'-rings. Some hoses incorporate a isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 241002016
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model
Marking:: Shida logo, Wras and date of manufacture (YYYY) on hose ferrule. Flow arrow on isolation valve
Installation Requirements:: R001 R009
Expiry date:: 31/10/2029
Model:: SD-PEX-01 (Stainless-steel braided – PEX natural lined) Size: DN6 - F15X1, F3/8, F1/2, M8X1, M10X1, M12X1, M15X1. Size: DN8 - F15x1, F3/8, F1/2, M8X1, M10X1, M12X1, M15X1, MC3/4, MC1/2, MC3/8, CF1/2-elbow,15mm compression, 15mm compression iso valve Size: DN10 - F1/2, M10X1, M12X1, F3/4, 15mm compression, 22mm compression, 15mm compression iso valve Size: DN13 - F1/2, F3/4, 15mm compression, 22mm compression, 15mm compression iso valve SD-PEX-02 (Nylon braided – PEX natural lined) Size: DN6 - F15X1, F3/8, F1/2, M8X1, M10X1, M12X1, M15X1. Size: DN8 - F15x1, F3/8, F1/2, M8X1, M10X1, M12X1, M15X1, MC3/4, MC1/2, M3/8, CF1/2-elbow,15mm compression, 15mm compression iso valve Size: DN10 - F1/2, M10X1, M12X1, F3/4, 15mm compression, 22mm compression, 15mm compression iso valve Size: DN13 - F1/2, F3/4, 15mm compression, 22mm compression, 15mm compression iso valve

Product Images

Approval Holder:: Zhejiang Shida Pipe Co. Ltd

Company Name
Zhejiang Shida Pipe Co. Ltd
Address
Chumen Technology Industrial Zone, Wujia District, Yuhuan City, Chumen Yuhuna
Country
China
General Email
76991784@qq.com

View All Listings by this Company

WRAS Approval Number: #241002017

Range of stainless-steel or nylon braided hoses with a PEX inner hose. The hoses are supplied with either silicone or EPDM 'O'-rings. Some hoses incorporate a isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 241002017
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models below
Marking:: Shida logo, Wras and date of manufacture (YYYY) on hose ferrule. Flow arrow on isolation valve.
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: SD-PEX-03 (Stainless-steel braided – Black lined) Size:DN6 - F3/8”, F½”, M8X1, M10X1, M12X1, M15X1, F15X1. Size: DN8 - F15x1, F3/8, F1/2, M8X1, M10X1, M12X1, M15X1, MC3/4, MC1/2, MC3/8, CF1/2-elbow, 15mm compression, 15mm compression iso valve Size: DN10 - F1/2, M10X1, M12X1, F3/4, 15mm compression, 22mm compression, 15mm compression iso valve Size: DN13 - F1/2, F3/4, 15mm compression, 22mm compression, 15mm compression iso valve SD-PEX-04 (Nylon braided – Black lined) DN6 - F3/8”, F½”, M8X1, M10X1, M12X1, M15X1, F15X1. DN8 - F15x1, F3/8, F1/2, M8X1, M10X1, M12X1, M15X1, MC3/4, MC1/2, MC3/8, CF1/2-elbow,15mm compression, 15mm compression iso valve DN10 - F1/2, M10X1, M12X1, F3/4, 15mm compression, 22mm compression, 15mm compression iso valve DN 13 - F1/2, F3/4, 15mm compression, 22mm compression, 15mm compression iso valve

Approval Holder:: Zhejiang Shida Pipe Co. Ltd

Company Name
Zhejiang Shida Pipe Co. Ltd
Address
Chumen Technology Industrial Zone, Wujia District, Yuhuan City, Chumen Yuhuna
Country
China
General Email
76991784@qq.com

View All Listings by this Company