Directory Search Results

Print List

#241002717

WC dual flush valve incorporating a plastic body with a silicone seal. The valves are operated via plastic levers for either a full or reduced flush and incorporate an internal overflow. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
241002717
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Ø67mm
Marking:
WRAS and HONJIM logo on body
Installation Requirements:
R001 R571 R582
Expiry date:
31/10/2029
Model:
B2010
Product Images

Manufacturer:
Zhejiang Honjim Intelligent Technology Co., Ltd
Company Name
Zhejiang Honjim Intelligent Technology Co., Ltd
Address
Port-neighboring Industrial estate, Jiantiao Town, Sanmen County, Taizhou City, Zhejiang Province,China

View All Listings by this Company

Print This Approval


#2112373

Jet range of water meters with brass blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure16.0 bar. Maximum operating temperature 85°C.

Section:
1505 Water Meters
Size:
see model
Marking:
JET, WRAS and other technical info on dial.
Installation Requirements:
R001 R120
Expiry date:
31/12/2026
Model:
¾” BSP (M) 172033 JET NON PULSED COLD WATER METER 15 FTG 172035 JET PULSED COLD WATER METER 15 FTG 172041 JET PULSED HOT WATER METER 15 FTG 1” BSP (M) 172034 JET NON PULSED COLD WATER METER 20 FTG 172036 JET PULSED COLD WATER METER 20 FTG 172042 JET PULSED HOT WATER METER 20 FTG 1 ¼” BSP (M) 172037 JET PULSED COLD WATER METER 25 FTG 172043 JET PULSED HOT WATER METER 20 FTG 1 ½” BSP (M) 171038 JET PULSED COLD WATER METER 32 FTG 172044 JET PULSED COLD WATER METER 20 FTG 2” BSP (M) 172039 JET PULSED COLD WATER METER 32 FTG 172045 JET PULSED COLD WATER METER 20 FTG 2 ½” BSP (M) 172040 JET PULSED COLD WATER METER 32 FTG 172046 JET PULSED COLD WATER METER 20 FTG

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#240602077

Range of water meters with brass bodies and plastic impellers. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN15, DN20, DN25, DN32, DN40, DN50.
Marking:
Aquamotion, WRAS and technical information on meter face. Flow arrow and size on body.
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
MJH range.

Approval Holder:
Aquamotion
Company Name
Aquamotion
Address
Unit 7 Woodland Close Mansfield Nottinghamshire
Postcode
NG21 9BF
Country
United Kingdom
Phone
01623 664030
General Email
info@aqua-motion.co.uk

View All Listings by this Company

Print This Approval


#241002081

Range of in-line water meters with brass bodies and plastic turbines. The inlets incorporate plastic filters, and the outlets incorporate non-return valves (not suitable for backflow protection). Maximum working pressure 16.0 Bar. Maximum operating temperature 65.0°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M) ¾” BSP (M
Marking:
GWF, model code and other info on meter box
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
Sonico Nano DN15 Q3=2,5 R*** Sonico Nano DN20 Q3=2,5 R*** Sonico Nano DN20 Q3=4 R*** Body lengths DN15: 105 mm / 110mm / 115mm/ 134m / 142mm / 145mm / 160mm / 165mm / 170mm / 190mm / 220mm DN20: 105mm / 110mm / 115mm / 139mm /160mm / 165mm / 190mm / 220mm

Approval Holder:
GWF AG
Company Name
GWF AG
Address
Obergrundstrasse 119 Lucerne
Postcode
6005
Country
Switzerland
Phone
+41 41 319 51 77
General Email
moritz.roettger@gwf.ch

View All Listings by this Company

Print This Approval


#241002708

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
241002708
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:
U 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. U 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:
Pentax logo, model code and other technical information on data plate on body.
Installation Requirements:
R001 R415
Expiry date:
31/10/2029
Model:
ULTRA S range: U X(S) - XX/Y (T) Where: U = pump type (ULTRA), X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. U 3S models: U 3S-50/2; U 3S-70/3; U 3S-90/4; U 3S-100/5; U 3S-120/6; U 3S-150/7. U 5S models: U 5S-70/2; U 5S-80/3; U 5S-120/4; U 5S-150/5; U 5S-180/6; U 5S-200/7. U 7S models: U 7S-100/2; U 7S-120/3; U 7S-180/4; U 7S-250/5; U 7S-300/6. U 9S models: U 9S-100/2; U 9S-150/3; U 9S-200/4; U 9S-250/5. U 3S models: U 3S-50/2 T; U 3S-70/3 T; U 3S-90/4 T; U 3S-100/5 T; U 3S-120/6 T; U 3S-150/7 T. U 5S models: U 5S-70/2 T; U 5S-80/3 T; U 5S-120/4 T; U 5S-150/5 T; U 5S-180/6 T; U 5S-200/7 T. U 7S models: U 7S-100/2 T; U 7S-120/3 T; U 7S-180/4 T; U 7S-250/5 T; U 7S-300/6 T; U 7S-350/7 T. U 9S models: U 9S-100/2 T; U 9S-150/3 T; U 9S-200/4 T; U 9S-250/5 T. U 18S models: U 18S-180/2 T; U 18S-250/3 T; U 18S-400/4 T.
Product Images

Approval Holder:
PENTAX INDUSTRIES SpA
Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Country
Italy
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company
Manufacturer:
PENTAX INDUSTRIES SpA
Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Country
Italy
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1867 of 2242

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.