Range of cold water in tank booster sets incorporating an ‘AG’ air gap, consisting of a GRP water storage cistern incorporating a float operated inlet valve, with a copper float and submersible pump or pumps (depending on model). The products incorporate an externally mounted stainless-steel manifold with servicing valve(s), expansion vessel, pressure gauge and a digital control panel. The pumps are connected to the external components via a discharge assembly of internal pipework including an in-line non-verifiable single check valve assembly (suitable for backflow prevention of Fluid Category 2). Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2111366

Note:

These cisterns are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Section 7, Paragraph 4, of the Water Supply (Water Fittings) Regulations 1999. The products incorporate a Fluid Category 3 air gap arrangement.

Size:

1" BSP (M)

Marking:

Fluid Water or Stuart Turner, address, product ref, capacity, job ref and contact information on adhesive label on tank body. Fluid Water or Stuart Turner, model, year of manufacturer and serial no on control box.

Installation Requirements:

R001 R280 R415

Expiry date:

30/11/2026

Proviso:

If implemented, the overflow and warning pipe discharge to drain must be via a type `AA` `AB` or `AD` airgap in accordance with EN 1717.

Model:

IT-A-V-B-C-D-E-F-G-AG Where: IT = Product range name (In Tank). A = Number of pumps (1,2, or 3 pumps). V = Variable speed. B = Maximum flow (l/min per pump - 80 or 120l/min). C = Maximum head (m per Pump, e.g. 60). D = Controller type (MAB). E = Power input (T = 3 Phase – M = 1Phase). F = Vessel Capacity (8 = 8 litre, 24= 24 litre). G = Tank size (Nominal capacity in litres - 250-3000). AG = ‘AG’ air gap. Example: IT-3V-8060-MAB-M/24-1000-AG In Tank booster set with 3 pumps, variable speed, 80l/min max. flow and 60m max. head, MAB controller, 1 phase, 24 litre expansion vessel, 1000 litre capacity with an AG air gap.

Product Images

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of cold water in tank booster sets incorporating an ‘AB’ air gap, consisting of a GRP water storage cistern incorporating a float operated inlet valve, with a copper float and submersible pump or pumps (depending on model). The products incorporate an externally mounted stainless-steel manifold with servicing valve(s), expansion vessel, pressure gauge and a digital control panel. The pumps are connected to the external components via a discharge assembly of internal pipework including an in-line non-verifiable single check valve assembly (suitable for backflow prevention of Fluid Category 2). Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2111367

Note:

These cisterns are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Section 7, Paragraph 4, of the Water Supply (Water Fittings) Regulations 1999. The products incorporate a Fluid Category 5 air gap arrangement.

Size:

1" BSP (M)

Marking:

Fluid Water or Stuart Turner, address, product ref, capacity, job ref and contact information on adhesive label on tank body. Fluid Water or Stuart Turner, model, year of manufacturer and serial no on control box.

Installation Requirements:

R001 R280 R415

Expiry date:

30/11/2026

Proviso:

If implemented, the warning pipe discharge to drain must be via a type `AA` `AB` or `AD` airgap in accordance with EN 1717.

Model:

IT-A-V-B-C-D-E-F-G-AB Where: IT = Product range name (In Tank). A = Number of pumps (1,2, or 3 pumps). V = Variable speed. B = Maximum flow (l/min per pump - 80 or 120l/min). C = Maximum head (m per Pump, e.g. 60). D = Controller type (MAB). E = Power input (T = 3 Phase – M = 1Phase). F = Vessel Capacity (8 = 8 litre, 24= 24 litre). G = Tank size (Nominal capacity in litres - 250-3000). AB = ‘AB’ air gap. Example: IT-3V-8060-MAB-M/24-1000-AB In Tank booster set with 3 pumps, variable speed, 80l/min max. flow and 60m max. head, MAB controller, 1 phase, 24 litre expansion vessel, 1000 litre capacity with an AB air gap.

Product Images

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of pumps with stainless steel bodies and plastic impellors. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2112057

Size:

1½” BSP (M) or 2” (M) inlet/outlet.

Marking:

Wilo SE, model and product info on data plate on body

Installation Requirements:

R001 R415

Expiry date:

31/12/2026

Model:

Para MAXO-Z 25-180-08. Para MAXO-Z 25-180-10. Para MAXO-Z 30-180-08. Para MAXO-Z 30-180-10.

Product Images

Approval Holder:

Wilo SE

Company Name

Wilo SE

Address

Werk Hof, Heimgartenstr. 1-3, 95030 Hof/Saale

Country

Germany

View All Listings by this Company

Range of multistage pumps with brass suction and discharge bodies, stainless steel housing, shaft and impeller, and EPDM ‘O’-rings and seals. Maximum working pressure: 6.0 bar (41491 & 41492 models) or 9.0 bar (41493 & 41494 models). Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2203051

Size:

1¼” BSP (F) inlet x 1" BSP (F) outlet

Marking:

STUART TURNER, model number, maximum pressure and temperature and other technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/03/2027

Model:

41491 - Multistage Pump 30, 41492 - Multistage Pump 40, 41493 - Multistage Pump 50, 41494 - Multistage Pump 60.

Product Images

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Manufacturer:

Fujian Fuan Wendy Electrical Machinery Co Ltd

Company Name

Fujian Fuan Wendy Electrical Machinery Co Ltd

Address

Qinxiyang Industrial Zone Fuan Fujian

Country

China

General Email

View All Listings by this Company

Range of overhead showers with brass and plastic bodies (various finishes - see models). The inlet incorporates a stainless-steel strainer and a plastic strainer. Products to be used with basic sets with brass bodies and EPDM O-rings. Open outlet use only

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2106044

Note:

Open outlet use only.

Size:

35296000 model: 12mm spigot. 35286000 and 35297000 models: 15mm plastic pipe. All other models: ½” BSP (M) Basic sets models added October 2023: 35361180 – 1/2" BSP (F) 35363180 – stainless steel braided silicone lined flexible hose assemblies with 1/2" BSP (M & F)

Marking:

Axor on showerhead face Basic sets models added October 2023: 35361180 – Hansgrohe and model on adhesive label on body. 35363180 – Hansgrohe on adhesive label on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2026

Model:

35284XXX - Axor Overhead shower 250 1jet with shower arm. 35286XXX - Axor Overhead shower 250 1jet with ceiling connection. 35287XXX - Axor Overhead shower 250 1jet ceiling. 35296XXX - Axor Overhead shower 250 2 jet with shower arm. 35297XXX - Axor Overhead shower 250 2 jet with ceiling connection. 35298XXX - Axor Overhead shower 250 2jet ceiling connection. 35300XXX - Axor Overhead shower 300 1jet with shower arm. 35301XXX - Axor Overhead shower 300 1jet with ceiling connection. 35302XXX - Axor Overhead shower 300 1jet ceiling. 35303XXX - Axor Overhead shower 300 with shower arm. 35304XXX - Axor Overhead shower 300 2jet with ceiling connection. 35305XXX - Axor Overhead shower 300 2jet ceiling. 35306XXX - Axor Overhead shower 250/250 1 jet with shower arm. 35308XXX - Axor overhead shower 250/250 1jet ceiling connection. 35309XXX - Axor Overhead shower 250/250 1jet ceiling. 35310XXX - Axor overhead shower 250/250 2jet with shower arm. 35312XXX - Axor overhead shower 250/250 2jet with ceiling connection. 35313XXX - Axor Overhead shower 250/250 2jet ceiling. 35314XXX - Axor Overhead shower 300/300 1jet with shower arm. 35316XXX - Axor Overhead shower 300/300 1jet with ceiling connection. 35317XXX - Axor Overhead shower 300/300 1jet with ceiling connection. 35318XXX - Axor Overhead shower 300/300 2jet with shower arm. 35320XXX - Axor Overhead shower 300/300 2jet ceiling connection. 35321XXX - Axor Overhead shower 300/300 2jet ceiling. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish. Basic sets models added October 2023: 35361180 – Basic set for overhead shower 2jet with shower arm 35363180 – Basic set for overhead shower ceiling

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company