'MC-PROOF 4200 AE'. Site applied, cream coloured (once mixed), two-component urethane based coating. Mix Part A (amber liquid) with Part B (amber liquid) in a volume ratio of 1:1 and apply as per manufacturer's TDS dated 07.10.2025. Cure for 24 hours@7°C. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2305566

Expiry date:

31/05/2028

Approval Holder:

MC Bauchemie Middle East LLC

Company Name

MC Bauchemie Middle East LLC

Address

Building No. R1060, Warehouse No. 4G, Plot No. 599-1097, PO Box 215464, Jebel Ali, Dubai

Country

United Arab Emirates

View All Listings by this Company

'Berusil SM 2000'. Clear, liquid lubricant. Apply as per manufacturer's instructions. For use with water up to 85°C.

Section:

5160 Lubricants

Expiry date:

31/10/2030

Approval Holder:

Carl Bechem GmbH

Company Name

Carl Bechem GmbH

Address

Weststrasse 120, 5889 Hagen

Country

Germany

Phone

+49 2331 9350

General Email

bechem@bechem.de

View All Listings by this Company

'Tritan™ TX2001'. Clear, injection moulded copolyester (PCTM) material. For use with water up to 85°C.

Section:

5217 Polyester

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250955037

Expiry date:

30/09/2030

Approval Holder:

Eastman Chemical Company

Company Name

Eastman Chemical Company

Address

200 South Wilcox Drive, Kingsport, TN, 37660-5147

Country

United States

View All Listings by this Company

'POLYNT 1349 TAEQ20 to be used in conjunction with POLYCOR LP PA FC CLEAR 0200'. POLYNT 1349 TAEQ20 is a polyester resin and LP PA FC CLEAR 0200 is a factory applied, gel coat (when used together the material appears light pink in colour). Apply as per manufacturer's TDS ‘7206 Version: 0, 19/11/2020’. Cure for 24 hours@25°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5217 Polyester

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250955065

Expiry date:

30/09/2030

Approval Holder:

Polynt Composites UK limited

Company Name

Polynt Composites UK limited

Address

Laporte Road, Stallingborough, Nr. Grimsby, Lincolnshire

Postcode

DN41 8DR

Phone

+44 1469 572464

View All Listings by this Company

'Reno 100+'. Dual layered, extruded polyethylene pipe comprising of a black coloured inner and blue coloured outer layer. For use with water up to 23°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

250955028

Expiry date:

30/09/2030

Approval Holder:

Idrotherm 2000 SpA

Company Name

Idrotherm 2000 SpA

Address

Via Pio La Torre, 21 55032 Castelnuovo di Garfagnana (LU)

Country

Italy

View All Listings by this Company