Single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

240988005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX flexible hose assemblies incorporating ½” BSP (F) captive nut end connections

Marking:

Crosswater logo on rear of body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2029

Model:

PRO714Dx Where x denotes the finish and is replaced with: C – Chrome, V - stainless steel effect, F - brushed brass, M - matt black, A – anthracite, W – white, B - brushed black chrome, N - polished nickel, L - brushed nickel, Q - unlacquered brass, RG - rose gold, BGR - brushed rose gold, P – copper, BP – Brushed Copper, AP – Antique Copper, S – stainless Steel, SF – Stainless Steel Brass Effect, SM – Black Stainless Steel, G – gunmetal, UB – unlacquered brushed brass, Z – Bronze, AZ – Antique Bronze, BZ - Brushed Bronze, GR – Graphite, G- Gold & T- Slate

Product Images

Approval Holder:

Crosswater Ltd.

Company Name

Crosswater Ltd.

Address

Lake View House, Rennie Drive, Dartford.

Postcode

DA1 5FU

Country

United Kingdom

Phone

01322 475 739

General Email

david.cheshire@bathroombrands.com

View All Listings by this Company

Manufacturer:

Crosswater Ltd.

Company Name

Crosswater Ltd.

Address

Lake View House, Rennie Drive, Dartford.

Postcode

DA1 5FU

Country

United Kingdom

Phone

01322 475 739

General Email

david.cheshire@bathroombrands.com

View All Listings by this Company

Range of wall mounted, two-hole, single outlet, (fixed), combination tap assemblies, (brass bodies – various finishes), incorporating a ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum operating pressure 10 bar. Maximum operating temperature 60°C 13 623 180 rough-in set does not form as part of this approval.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

240704029

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F)

Marking:

AXOR on face plate

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2029

Model:

38 112 xx0 38 113 xx0 38 115 xx0 38 116 xx0 39 112 xx0 39 113 xx0 39 114 xx0 39 115 xx0 39 116 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish Product to be installed in combination with 13623180

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of wall mounted, two hole, single outlet fixed combination tap assemblies (chromium plated brass), incorporating a single sequential thermostatic cartridge controlling both flow and temperature with a single lever operating member. The spout outlets incorporate a plastic flow straightener The inlets incorporate a concentric isolation valve, stainless steel strainer and a plastic flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

240902012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Delabie logo on operating member

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2029

Model:

SECURITHERM BIOCLIP H9611P, H9614P & H9616P

Approval Holder:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes), incorporating a ceramic cartridge headwork with single lever operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic aerator. Both inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

240902050

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP F

Marking:

Villeroy & Boch logo on body

Installation Requirements:

R001 R020

Expiry date:

30/09/2029

Model:

TVT114002000XX XX at the end indicates the Finish of surfaces that are not in contact with water (61 - Chrome, K5 - Matt black, 76 - Brushed gold, 64 - Brushed nickel) E.g. TH1000 Thermostat with chrome finish (TVT11400100061).

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Range of combined bath filler and/or waste and overflow assemblies (see models) in various finishes. Maximum operating temperature: 60ºC

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

241002055

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

Stainless steel braided, EPDM lined, flexible hose assembly with a ½” BSP (F) captive nut (Filling Hose) and 1½” BSP (M) (Pop Up Waste)

Marking:

WRAS approved, CGS logo and product code on face plate

Installation Requirements:

R001 R576

Expiry date:

31/10/2029

Model:

SK134YY.XX (filler, waste and overflow), SK132YY.XX (filler, waste and overflow), SK122YY.XX (filler, waste and overflow), SK14YY.XX (waste and overflow). Model added February 2025: SK157YY.XX (filler, waste and overflow). Where YY denotes the overflow hose length and can be replaced with the following. Blank = max. 80cm, -1 = max. 125cm. Where XX denotes the finish, and can be replaced with any of the following: 01 = Standard Chrome, 05 = PVD Chrome, 06 = Black Chrome, 12 = Gold, 15 = Rose Gold, 17 = PVD Gold, 25 = Brushed Bronze, 26 = Brushed Copper, 33 = White Matt, 35 = White, 43 = Black Matt, 45 = Black, 40 = Brushed Nickel.

Product Images

Approval Holder:

C.G.S. S.R.L.

Company Name

C.G.S. S.R.L.

Address

Via Torino 9/A Cureggio (NO)

Postcode

28060

Country

Italy

General Email

f.cerutti@cgsmixer.com

View All Listings by this Company