Range of electronic pump controllers with plastic bodies. Maximum working pressure 12.0 Bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

COELBO CONTROL SYSTEM, S.L and technical information on adhesive label on body. Speedmatic on control panel.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

S101083 Speedmatic 101110 MASTER CB (1.1/4” BSP (M)) S101541 Speedmatic 101110 (1.1/4” BSP (M)) S101104 Speedmatic easy CB (1.1/4” BSP (M)) S101542 Speedmatic easy (1.1/4” BSP (M)) S101543 Ecodrive (1” BSP (M)) U471037 Onematic (1.1/4” BSP (M))

Product Images

Manufacturer:

COELBO CONTROL SYSTEM, S.L.

Company Name

COELBO CONTROL SYSTEM, S.L.

Address

Ctra. De Rubí, 288 Terrassa

Postcode

08228

Country

Spain

View All Listings by this Company

Range of pressure transducers with stainless steel bodies. Maximum working pressure 10.0 Bar, 20 Bar or 40 Bar. Maximum operating temperature 99°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

9mm spigot for insertion into a quick release coupling or 1/4" BSP male.

Marking:

ABB, WRAS, Part number, Pressure range and technical info on adhesive label.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

3KXF004496U0100 - 9mm spigot. 10 bar, 3KXF004496U0200 - 9mm spigot. 10 bar, 3KXF004496U0500 - 9mm spigot. 20 bar, 3KXF004496U0600 - 9mm spigot. 20 bar, 3KXF004496U0700 - 1/4" BSP male. 40 bar, 3KXF004496U0800 - 1/4" BSP male. 40 bar, 3KXF004496U0900 - 9mm spigot. 20 bar.

Product Images

Approval Holder:

ABB Ltd.

Company Name

ABB Ltd.

Address

Oldends Lane, Stonehouse, Glos.

Postcode

GL10 3TA

View All Listings by this Company

Mixing valve incorporating a brass body and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure10.0 bar. Maximum operating temperature 65°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) captive nut

Marking:

Presto on body

Installation Requirements:

R001 R008 R010

Expiry date:

31/01/2030

Model:

29424 MIXER G1/2

Product Images

Manufacturer:

Les Robinets Presto S.A

Company Name

Les Robinets Presto S.A

Address

4 Rue Lavoiser St. Georges De Didonne

Postcode

17110

Country

France

Phone

+33 546 053 452

View All Listings by this Company

Direct coupler (brass with a range of finishes). Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

M28 X M28

Marking:

SHS on body

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

V296-XX ‘XX’ denotes the surface finish which will always be 2 or 3 digits and can be any combination of numbers and/or letters.

Product Images

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Range of Fastec® F13 and Fastec® F14 fittings for use with Fastec® manifold assemblies, incorporated with brass bodies and EPDM O-rings. To be used with copper pipe complying with BS EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Teco logo etched on body; F13 or F14, Year and batch/month No. (YYMM) on body

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

Fastec® F13 Elbow DN2105503 F13 Fastec fitting 90° M/F DN15 DN2105504 F13 Fastec fitting 90° F/F DN15 Tee DN2105507 F13 Fastec fitting M/F/F DN15 DN2105508 F13 Fastec fitting F/F/F DN15 2 way DN2105510 F13F Fastec splitter DN15 Straight DN2105531 F13 Fastec nipple M/M DN15 DN2105691 F13 Fastec cap Kit DN15 DN2208098 Fastec cap F13F DN15 DN2208080 Fastec fitting F13F DN15 DN2208081 Fastec Fitting extender F13F DN15 Fastec® F14 Elbow DN2208065 F14 Fastec Fitting 90° MF DN20 DN2208066 F14 Fastec Fitting 90° FF DN20 Tee DN2208067 F14 Fastec Fitting 90° MFF DN20 DN2208069 F14 Fastec Fitting 90° FFF DN20 Straight DN2410738 Fastec Fitting extender F14F DN20 DN2410737 Fastec Fitting F14F DN20 DN2208085 Fastec nipple F14M DN20 DN2208099 Fastec cap F14F DN20 DN2208087 Plug fastec F14M DN20 DN2208094 Fastec fitting F13M/F14M DN15

Product Images

Manufacturer:

TECO Srl

Company Name

TECO Srl

Address

Via Sandro Pertini n.39/41 25050 Provaglio d'Iseo (BS)

Country

Italy

View All Listings by this Company

Range of spherical valves with a DZR brass body and lever. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Altecnic logo casted on body; CR, date of manufacture (YYMM); CR etched on body and on 0560/05MC

Installation Requirements:

R001 R511

Expiry date:

31/03/2030

Model:

O560/05FL-HI ¾”BSP(M) O560/05DH ¾”BSP(M) O560/05RT ¾”BSP(M) - with drain valve O560/05HO ¾”BSP(M)

Product Images

Approval Holder:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Range of wall brackets (brass bodies – various finishes). Open outlet use only Maximum working temperature 85°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

ACY1013 & ACY1014 Aqualisa on body 706083 Elisa on body

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

ACY1013 BRASS WALL OUTLET ACY1014 BRASS WALL OUTLET WITH COMBINED HANDSET HOLDER 706083 BRASS WALL OUTLET WITH COMBINED HANDSET

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of flexible joints incorporating an EPDM (inner & outer) joint with a steel reinforcing ring and two carbon steel flanges. Maximum operating pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

1530 Miscellaneous Fittings

Size:

DN32 - DN150 flange

Marking:

DST Group on adhesive label on body DN, PN & YY/MM etched on body

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

PF16W032 PF16W040 PF16W050 PF16W065 PF16W080 PF16W100 PF16W125 PF16W150

Approval Holder:

DST Group Ltd

Company Name

DST Group Ltd

Address

Piksa House 2 Penrod Way Heysham Lancashire

Postcode

LA3 2UZ

Phone

01524 389 494

View All Listings by this Company

Water hammer arrestor with brass body and EPDM ‘O’ ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Pegler 62 WHA on adhesive label on body Pegler logo, temperature and pressure cast on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

PEG62

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of accumulators. The brass vessel connector of the ACC-060-TNK, ACC-120-TNK and ACC-180-TNK models incorporates a plastic flow regulator. Maximum working pressure 8.6 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless-steel braided EPDM lined flexible hose assembly with ¾” captive nut end connection

Marking:

Salamander Pumps and model number on adhesive label on body.

Installation Requirements:

R001 R009

Expiry date:

30/04/2030

Model:

ACC-060-TNK, ACC-120-TNK, ACC-180-TNK, ACC-330-TNK & ACC-450-TNK.

Approval Holder:

Salamander Pumps

Company Name

Salamander Pumps

Postcode

SR5 3XE

Country

United Kingdom

Phone

0191 535 4528

General Email

lewisw@salamanderpumps.co.uk

View All Listings by this Company

Manufacturer:

Salamander Pumps

Company Name

Salamander Pumps

Postcode

SR5 3XE

Country

United Kingdom

Phone

0191 535 4528

General Email

lewisw@salamanderpumps.co.uk

View All Listings by this Company