Directory Search Results

Print List

#2111311

Range of wall hung, gas-fired condensing combination boilers providing domestic hot water via a plate heat exchanger. The pressurised central heating system incorporates an expansion vessel and pressure relief valve set at 3.0 bar. The supplies to both domestic hot water and primary are controlled via spherical valves. The primary circuit has a maximum working pressure of 2.5 bar. The secondary circuit has maximum working pressure of 10.0 bar. Maximum supply temperature is 60°C. Maximum operating temperature of secondary circuit is 85°C.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2111311
Size:
Primary: 22mm compression inlet/outlet. Secondary: 15mm compression.
Marking:
Worcester and Worcester logo on front of boiler.
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
7-733-600-371: Greenstar 4000 25 Combi NG. 7-733-600-372: Greenstar 4000 25 Combi LPG. 7-733-600-373: Greenstar 4000 30 Combi NG. 7-733-600-374: Greenstar 4000 30 Combi LPG.
Product Images

Approval Holder:
Worcester Bosch
Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company
Manufacturer:
Bosch Thermotechnology Ltd. Bosch Thermotechnik GmbH. Bosck Termoteknik Sanayu ve Ticaret A.S.
Company Name
Bosch Thermotechnology Ltd. Bosch Thermotechnik GmbH. Bosck Termoteknik Sanayu ve Ticaret A.S.
Address
General Email

View All Listings by this Company

Print This Approval


#2109322

Range of ice making machines. The inlet supply is controlled by a solenoid valve. Inlet hose supplied. Maximum working pressure 5.0 bar. Cold water use only.

Section:
1500 Ice Making Machines
Size:
¾” BSP (M)
Marking:
Scotsman, model number, date of manufacture (YYMM) and other product information on adhesive label on panel.
Installation Requirements:
R001 R009 R150 R171
Expiry date:
30/09/2026
Proviso:
Discharge to drain must be via a type `AA` `AB` or `AD` airgap or in accordance with EN 1717
Model:
Scotsman AC206, AC226, EC 206, EC226, Scotsman MC46, MC1210
Product Images

Approval Holder:
Scotsman Ice Srl
Company Name
Scotsman Ice Srl
Address
Via Lainate 31 20010 Pogliano Milanese
Country
Italy
Phone
+39 02 93550500

View All Listings by this Company
Manufacturer:
Scotsman Ice Srl
Company Name
Scotsman Ice Srl
Address
Via Lainate 31 20010 Pogliano Milanese
Country
Italy
Phone
+39 02 93550500

View All Listings by this Company

Print This Approval


#2110052

Range of commercial air or liquid cooled ice making machines with flow controlled via solenoid valve. Maximum working pressure 7.8 Bar. Cold water use only.

Section:
1500 Ice Making Machines
WRAS Approval Number:
2110052
Note:
R008 applies to the inlet solenoid valve.
Size:
Dual layer PVC lined flexible hose assembly (Grey PVC outer/Black PVC inner) with ¾" captive nut end connections.
Marking:
Hoshizaki on front panel. Hoshizaki, model, product info on label on left side panel.
Installation Requirements:
R001 R008 R009 R150 R171 R511
Expiry date:
31/10/2026
Model:
IM-240ANE-HC, IM-240DWNE-HC, IM-240ANE-HC-23, IM-240XWNE-HC, IM-240ANE-HC-SF, IM-240AWNE-HC, IM-240ANE-HC-23-SF, IM-240WNE-HC, IM-100NE-HC, IM-130WNE-HC, IM-100NE-HC-23, IM-100WNE-HC, IM-130ANE-HC, IM-100WNE-HC, IM-130ANE-HC-23, IM-240DWNE-HC-23, IM-130ANE-HC-SF, IM-240XWNE-HC-23, IM-130ANE-HC-23-SF, IM-240AWNE-HC-23, IM-100CNE-HC, IM-130WNE-HC-23, IM-100CNE-HC-23, IM-240WNE-HC-23, IM-130NE-HC, IM-100WNE-HC-23, IM-130NE-HC-23, IM-240DWNE-HC-C, IM-240NE-HC, IM-240XWNE-HC-C, IM-240NE-HC-23, IM-240DNE-HC, IM-240DNE-HC-C, IM-240XNE-HC, IM-240XNE-HC-C, IM-240DNE-HC-23, IM-240XNE-HC-23.
Product Images

Approval Holder:
Hoshizaki Europe Ltd
Company Name
Hoshizaki Europe Ltd
Address
Telford 70 Stafford Park 7 Telford
Postcode
TF3 3BQ
Country
Shropshire

View All Listings by this Company
Manufacturer:
Hoshizaki Europe Ltd
Company Name
Hoshizaki Europe Ltd
Address
Telford 70 Stafford Park 7 Telford
Postcode
TF3 3BQ
Country
Shropshire

View All Listings by this Company

Print This Approval


#2111023

‘Aquila V4 C1’ range of water meters (brass or bronze bodies) with a plastic working chamber, flow regulator and impellor, and either NBR or EPDM ‘O’-rings. The products are supplied with loose NBR/fibre flange gaskets. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1505 Water Meters
Size:
DN50 - DN100 flanged
Marking:
DIEHL logo on cap. DIEHL METERING, CE, temperature, maximum pressure and other technical information on meter face. Flow arrow and size on body
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
Aquila V4 C1: Brass bodies: DN 50 and DN 65 length 300 mm Bronze bodies: DN 80 and DN 100 length 350 mm
Product Images

Approval Holder:
Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.
Company Name
Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.
Country

View All Listings by this Company
Manufacturer:
Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.
Company Name
Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.
Country

View All Listings by this Company

Print This Approval


#2107126

Copper corrugated hose. Maximum working pressure 10.0 bar. Maximum working temperature 90°C.

Section:
1530 Miscellaneous Fittings
Size:
See model.
Marking:
Flomasta, WRAS and year of manufacture (YYYY) on body. Models Added December 2023 Flomasta or Kingfisher, WRAS and date of manufacture (YYYY) on body.
Installation Requirements:
R001
Expiry date:
31/07/2026
Model:
COPPER CORRUGATED HOSES: 03890158 15MM TUBE X ½” CAPTIVE NUT, 03890165: 15MM TUBE X 15MM TUBE. Models Added December 2023 3342978024433 15mm tube x ½” captive nut. 5059340261133 15mm tube x 15mm tube.

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 179 of 1241

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.