'KF011670FDA'. Black coloured, compression moulded, FKM rubber material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:

5375 Rubbers

Section Subtitle:

Fluorocarbon - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250855030

Expiry date:

31/08/2030

Approval Holder:

Chang Horing Rubber Co., Ltd.

Company Name

Chang Horing Rubber Co., Ltd.

Address

No 38 Lu-Gong South 3 Road, Lu-Kang Town, Changhua Hsien

Country

Taiwan

Phone

+886 4 7810868

View All Listings by this Company

Range of injection moulded, VMQ rubber gaskets, seals, & `O` rings manufactured from the below compounds. The components are available in blue, green, grey, opaque (beige coloured), red, transparent & yellow. The numbers in the name of the compound indicates the shore hardness between 40 & 80. Tested in-radii sizes: Gaskets: 0.2mm - 5.0mm. Seals & `O` rings: 0.5mm - 5.0mm. S50B04E, S60B00E, S70B06E, S70B07E, S70V02E, S50V01E, S60O02E, S70O05E, S50O03E, S50O05E, S60O01E, S70O03E, S40A01E, S60A00E, S70A02E, S40R03E, S45R01E, S50R10E, S50R01E, S60R05E, S65R04E, S70R04E, S80R01E, S40R02E, S50R06E, S60R07E, S70R19E, S70R24E, S50T05E, S50T00E, S55T00E, S60T00E, S60T00T, S70T04E, S70T00E, S75T00E, S80T00E, & S70G01E. For use with water up to 85°C.

Section:

5410 Rubbers

Section Subtitle:

Silicone - components.

WRAS Approval Number:

250755059

Expiry date:

31/07/2030

Approval Holder:

Datwyler Sealing Solutions Italy S.p.A.

Company Name

Datwyler Sealing Solutions Italy S.p.A.

Address

Via Castello 11-14/A, 24060, Viadanica BG

Country

Italy

Phone

+39 35 9399 11

View All Listings by this Company

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated stainless steel bodies). The flow is controlled by a solenoid valve that is activated via an infrared sensor, and the spout outlets incorporate plastic aerators. Maximum working pressure 8.0 Bar Maximum operating temperature 65.0°C

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

250902029

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

10mm OD Spigot Connection

Marking:

Stern on operating member

Installation Requirements:

R001 R006 R009

Expiry date:

30/09/2030

Model:

237820 – Extreme LFB 237810 – Extreme LFE 237821 - Extreme LFB AISI316 237811 - Extreme LFE AISI316

Approval Holder:

Y. Stern Engineering (1989) Ltd

Company Name

Y. Stern Engineering (1989) Ltd

Address

15 Gan Rave Blvd. Yavne

Postcode

8122217

Country

Israel

Phone

+972 8 9326007

General Email

leah@sternfaucets.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlets incorporate plastic aerators. Maximum working pressure:8.0 Bar Maximum operating temperature:65 °C

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

250902031

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided, PEX lined hose incorporating 3/8" BSP (F) captive nut end connection

Marking:

Stern on top of tap body

Installation Requirements:

R001 R006 R009

Expiry date:

30/09/2030

Model:

212000 – Boreal B 212005 – Boreal E 212010 – Boreal Plus B 212015 – Boreal Plus E

Approval Holder:

Y. Stern Engineering (1989) Ltd

Company Name

Y. Stern Engineering (1989) Ltd

Address

15 Gan Rave Blvd. Yavne

Postcode

8122217

Country

Israel

Phone

+972 8 9326007

General Email

leah@sternfaucets.com

View All Listings by this Company

Range of bottom and side entry BS1212-4 (2016) compact type float operated inlet valves, for WC flushing cisterns with plastic bodies and adjustable floats and a plastic flow regulator at the inlet. Maximum operating pressure: 10 bar. Maximum operating temperature: 23°C.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

250904710

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

IRN R560 only applied to model AG104 PLUS BOTTOM.

Size:

See models.

Marking:

OLI & BS1212-4 on body.

Installation Requirements:

R001 R550 R560

Expiry date:

30/09/2030

Model:

AG104 PLUS SIDE - ½” BSP (M), AG104 PLUS VERTICAL - 3/8” Captive Nut, AG104 PLUS BOTTOM - ½” BSP (M).

Approval Holder:

Oli-Sistemas Sanitarios, S.A

Company Name

Oli-Sistemas Sanitarios, S.A

Postcode

3800-314 Aveiro

Country

Portugal

General Email

geral@oli-world.com

View All Listings by this Company