Water Regulations Approval Scheme Ltd

Miscellaneous Fittings

Section Code 1530 :

WRAS Approval Number: #2201802

Water hammer arrestor with brass body. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:: 1530 Miscellaneous Fittings
Marking:: RBM on body
Installation Requirements:: R001
Expiry date:: 31/03/2026
Model:: 30720400

Approval Holder:: RBM S.p.a.

Company Name
RBM S.p.a.
Address
Componenti Per Impianti Idrotermici Via S. Giuseppe, 1 25075 Nave (Brescia)
Country
Italy

View All Listings by this Company

WRAS Approval Number: #2112359

Y type fittings incorporating brass body and NBR washer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
Size:: ¾” BSP (F) captive nut x ¾” BSP( M) x 3/4” BSP (M)
Marking:: Flomasta (Brand of Kingfisher), PN10, and size on body.
Installation Requirements:: R001
Expiry date:: 31/12/2026
Model:: EPH_WAS20_0056

Product Images

Approval Holder:: Kingfisher International Products Ltd.

Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square Paddington, London
Postcode
W2 6PX

View All Listings by this Company

WRAS Approval Number: #2201332

Range of pump inverters with plastic bodies, NBR rubber and EPDM rubber seals and ‘O’-rings. The products incorporate an inline resilient trim non-return valve. Maximum working pressure 13.0 bar. Cold water use only.

Section:: 1530 Miscellaneous Fittings
Size:: 1¼” BSP (M) inlet x 1½” BSP (F) outlet.
Marking:: DAB Water Technology on front casing. Manufacturer name, CE marking, date of manufacture (N.X.YYWW, where N.x = product revision index) and other technical information on adhesive label on side of casing.
Installation Requirements:: R001
Expiry date:: 31/01/2027
Model:: Active driver plus M/T 1.0 Active driver plus M/T 2.2 Active driver plus T/T 3 Active driver plus T/T 5.5 Active driver plus M/M 1.1 Active driver plus M/M 1.8/DV Active driver plus M/M 1.5/DV Models are named “Active driver plus x/y z” or “Active driver plus x/y z/DV” Where: x indicates the configuration of the entry line, which can be monophase (“M”) or threephase (“T”), y indicates the configuration of the exit line, which can be monophase (“M”) or threephase (“T”), z indicates the maximum mechanical power of the pump’s motor and “DV” indicates dual voltage models (able to work at 115V or at 230V).

Product Images

Approval Holder:: DAB PUMPS SPA

Company Name
DAB PUMPS SPA
Address
Via Marco Polo 14 Mestrino (PD)
Postcode
35035
Country
Italy
General Email
certifications@dwtgroup.com

View All Listings by this Company
Manufacturer:: DAB PUMPS SPA

Company Name
DAB PUMPS SPA
Address
Via Marco Polo 14 Mestrino (PD)
Postcode
35035
Country
Italy
General Email
certifications@dwtgroup.com

View All Listings by this Company

WRAS Approval Number: #2201032

Bypass valve assembly with a plastic body and push/pull operating method to switch flows between different outlets. The product incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1530 Miscellaneous Fittings
Size:: ¾” BSP (M)
Marking:: Culligan (owners of Harvey Water Softeners), CBP01 and flow arrows on body.
Installation Requirements:: R001 R008
Expiry date:: 31/01/2027
Model:: G3920

Product Images

Approval Holder:: Harvey Water Softeners

Company Name
Harvey Water Softeners
Address
Hipley Street Old Woking Surrey
Postcode
GU22 9LQ
Country
United Kingdom
Phone
01483 753430
General Email
papillon.bleeker@harvey.co.uk

View All Listings by this Company

WRAS Approval Number: #2112012

Union ball, non-return valve with a plastic PVC body. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 2112012
Note:: Does not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.
Size:: 20mm (F) solvent cement connection
Marking:: Company logo (ERA), PN and size on body
Installation Requirements:: R001
Expiry date:: 31/12/2026
Model:: UBC02 20mm

Product Images

Approval Holder:: ERA Piping (Zhejiang) Co.,Ltd.

Company Name
ERA Piping (Zhejiang) Co.,Ltd.
Address
No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:: ERA Piping (Zhejiang) Co.,Ltd.

Company Name
ERA Piping (Zhejiang) Co.,Ltd.
Address
No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang
Country
China

View All Listings by this Company