“<A> Press Copper M Profile” series press fittings with a copper body and EPDM ‘O’-rings, for use with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250102006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm - 54mm.

Marking:

A (manufacturers logo) and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

<A> Press Copper M Profile series: 90° Street Bend: APWG5001 150000, APWG5001 180000, APWG5001 220000, APWG5001 280000, APWG5001 350000, APWG5001 420000, APWG5001 540000. 90° Bend: APWG5002 150000, APWG5002 180000, APWG5002 220000, APWG5002 280000, APWG5002 350000, APWG5002 420000, APWG5002 540000. 45° Obtuse Street Elbow: APWG5041 150000, APWG5041 180000, APWG5041 220000, APWG5041 280000, APWG5041 350000, APWG5041 420000, APWG5041 540000. 45° Obtuse Elbow: APWG5040 150000, APWG5040 180000, APWG5040 220000, APWG5040 280000, APWG5040 350000, APWG5040 420000, APWG5040 540000. Crossover Short: APWG5086 150000, APWG5086 180000, APWG5086 220000. 60 deg Copper bend with plain ends: APWG5360 280000, APWG5360 350000, APWG5360 420000, APWG5360 540000. 30 deg Copper bend with plain ends: APWG5330 280000, APWG5330 350000, APWG5330 420000, APWG5330 540000. 15 deg Copper bend with plain ends: APWG5315 280000, APWG5315 350000, APWG5315 420000, APWG5315 540000. 45 deg Copper bend with plain ends: APWG5345 280000, APWG5345 350000, APWG5345 420000, APWG5345 540000. Equal Tee: APWG5130 151515, APWG5130 181818, APWG5130 222222, APWG5130 282828, APWG5130 353535, APWG5130 424242, APWG5130 545454. Reduced Tee: APWG5130 152215, APWG5130 181515, APWG5130 181518, APWG5130 181815, APWG5130 281528, APWG5130 221222, APWG5130 181218, APWG5130 221515, APWG5130 221522, APWG5130 221822, APWG5130 222215, APWG5130 281828, APWG5130 282228, APWG5130 351535, APWG5130 352235, APWG5130 352835, APWG5130 421542, APWG5130 422242, APWG5130 422842, APWG5130 423542, APWG5130 542254, APWG5130 542854, APWG5130 543554, APWG5130 544254. Pipe Cross: APWG5901 181500, APWG5901 221500, APWG5901 281500. Fitting Reducer: APWG5243 181500, APWG5243 221500, APWG5243 221800, APWG5243 281500, APWG5243 281800, APWG5243 282200, APWG5243 352200, APWG5243 352800, APWG5243 422200, APWG5243 422800, APWG5243 423500, APWG5243 542800, APWG5243 543500, APWG5243 544200. Straight Coupler: APWG5270 150000, APWG5270 180000, APWG5270 220000, APWG5270 280000, APWG5270 350000, APWG5270 420000, APWG5270 540000. Reduced Coupler: APWG5240 221500. Cap: APWG5301 150000, APWG5301 180000, APWG5301 220000, APWG5301 280000, APWG5301 350000, APWG5301 420000, APWG5301 540000. Slip Coupler: APWG5270S150000, APWG5270S180000, APWG5270S220000, APWG5270S280000, APWG5270S350000, APWG5270S420000, APWG5270S540000.

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Press-Inox range of stainless-steel crimped fittings (‘M’ crimp profile) for use with stainless steel pipe (manufactured to EN10204). For above ground use only. Maximum working pressure: 16Bar. Maximum operating temperature: 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241102057

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm - 168.3mm (excluding 28mm). (Including 28mm from December 2024).

Marking:

PCC Logo, PI 316L, Size, Year of manufacture (YY-MM) and DVGW on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

All Models sizes are in mm are Pressfit unless specified are BSP 12000 Straight Coupling 15mm - 168,3mm 12010 Straight Male Adapter 15 x 1/2" 15 x 3/4" 18 x 1/2" 18 x 3/4" 22 x 1/2" 22 x 3/4" 22 x 1" 35 x 1" 35 x 1 1/4" 42 x 1 1/2" 54 x 2" 66.7 x 2 1/2" 76.1 x 2 1/2" 88.9 x 3" 108 x 4" 12020 Straight Female Adapter 15 x 1/2" 15 x 3/4" 18 x 1/2" 18 x 3/4" 22 x 1/2" 22 x 3/4" 22 x 1" 35 x 1" 35 x 1 1/4" 42 x 1 1/2" 12040 Sleeve Coupling 15mm – 108mm 12070 Tap Connector 15 x 3/4" 18 x 3/4" 22 x 1" 35 x 1 1/2"12080 Male Union 15 x 1/2" 18 x 1/2" 22 x 3/4" 35 x 1 1/4" 42 x 1 1/2" 54 x 2" 12100 Equal Tee 15mm - 168,3mm 12110 Reduced Tee 15mm - 168,3mm 12120 Female Tee 15mm – 108mm 12200 Bend 90° 15mm - 168,3mm 12210 Streetbend 90° 15mm - 168,3mm 12230 Bend 45° 15mm - 168,3mm 12240 Streetbend 45° 15mm - 168,3mm 1231 Male Threaded Bend 90° 15 x 1/2" 15 x 3/4" 18 x 1/2" 18 x 3/4" 22 x 1/2" 22 x 3/4" 22 x 1" 35 x 1" 35 x 1 1/4" 42 x 1 1/2" 54 x 2" 1232 Female Threaded Bend 90° 15 x 1/2" 15 x 3/4" 18 x 1/2" 18 x 3/4" 22 x 1/2" 22 x 3/4" 22 x 1" 35 x 1" 35 x 1 1/4" 42 x 1 1/2" 54 x 2" 1234 Female Wallplate 15 x 1/2" 15 x 3/4" 18 x 1/2" 18 x 3/4" 22 x 1/2" 22 x 3/4" 22 x 1" 35 x 1" 35 x 1 1/4" 42 x 1 1/2" 54 x 2" 12350 Male Bend 90° 15mm – 54mm 12360 Crossover / By-Pass Bend 15mm – 54mm 12400 Flange PN16 with pressend 22 x 1/2" 22 x 3/4" 22 x DN20 35 x DN32 42 x DN40 54 x DN50 66.7 x DN65 76.1 x DN65 76.1 x DN80 88.9 x DN80 108 x DN100 139.7 x DN125 168.3 x DN150 12410 Endcap 15mm – 108mm 12430 Male reducer 15mm - 168,3mm 12450 Insert Male Adapter 15mm – 54mm 12460 Insert Female Adapter 15mm – 54mm 12820 O-Ring 15mm - 168,3mm Models Added December 2024: 12010 Straight Male Adapter 28 x 3/4" 28 x 1" 12020 Straight Female Adapter 28 x 3/4" 28 x 1" 12070 Tap Connector 28 x 1 1/4" Male Union 28 x 1" 1231 Male Threaded Bend 90° 28 x 3/4" 28 x 1" 1232 Female Threaded Bend 90° 28 x 3/4" 28 x 1" 1234 Female Wallplate 28 x 3/4" 28 x 1" 12400 Flange PN16 with pressend 28 x 1" 28 x DN25

Product Images

Approval Holder:

PCC GmbH

Company Name

PCC GmbH

Address

Dusseldorfer Strasse 15, D-71332 Wailblingen

Country

Germany

View All Listings by this Company

Range of brass (CW617 or CW511L) press fit fittings (M-Type) for use with copper pipe manufactured to EN 1057. Maximum working pressure: 16 Bar. Maximum operating temperature: 99°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241202010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models below

Marking:

Ningbo Jintian (JT) Logo, Size and WRAS on body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

BP5240F Coupler: 15mm – 54mm x 1/2" BSP – 2” BSP (F). BP5243M Coupler: 12mm – 54mm x 3/8" BSP – 2” BSP (M). BP5090F Elbow: 12mm – 54mm x 3/8" BSP – 2” BSP (F). BP5092F Elbow: 12mm – 54mm x 3/8" BSP – 2” BSP (M). BP5094F Wallplate elbow: 15mm – 28mm x 1/2" BSP – 1” BSP (F). BP5130F Branch Tee: 15mm – 54mm x 15mm – 54mm x 3/8" BSP – 2” BSP (F). BP5240G Straight swivel: 15mm – 28mm x 1/2" BSP – 1 1/4” BSP (F). BP9201M Male union coupler: 12mm – 54mm x 3/8" BSP – 2” BSP (M). BP9202F Male union with Female end: 12mm – 54mm x 3/8" BSP – 2” BSP (F). BP9203PP Coupler: 12mm – 54mm. BPA9270F Female nipple: 12mm – 35mm. BPA9272M Male Nipple: 12mm – 54mm.

Product Images

Approval Holder:

Ningbo Jintian Copper Tube Co Ltd

Company Name

Ningbo Jintian Copper Tube Co Ltd

Address

No.1 ChengXi West Road, CiCheng, NingBo

Country

China

Phone

0086 574 8757 4425

General Email

audrey@jtcorp.com.cn

View All Listings by this Company

Range of in-line water meters with brass bodies and plastic turbines. The inlets incorporate plastic filters, and the outlets incorporate non-return valves (not suitable for backflow protection). Maximum working pressure 16.0 Bar. Maximum operating temperature 65.0°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP(M), ¾” BS (M), 1¼” BSP(M), 1½” BSP(M) & 2” BSP(M).

Marking:

GWF, model code and other info on meter box

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

Sonico Nano DN15 Q3=2,5 R*** Sonico Nano DN20 Q3=2,5 R*** Sonico Nano DN20 Q3=4 R*** Body lengths DN15: 105 mm / 110mm / 115mm/ 134m / 142mm / 145mm / 160mm / 165mm / 170mm / 190mm / 220mm DN20: 105mm / 110mm / 115mm / 139mm /160mm / 165mm / 190mm / 220mm Models added October 2025: Sonico Nano DN25*** Sonico Nano DN32 *** Sonico Nano DN40*** Body lengths: DN25: 150mm/160mm/175mm/198mm*/220mm*/260mm* DN32: 150mm/160mm/200mm*/220mm*/260mm* DN40: 150mm/200mm/300mm*

Product Images

Approval Holder:

GWF AG

Company Name

GWF AG

Address

Obergrundstrasse 119 Lucerne

Postcode

6005

Country

Switzerland

Phone

+41 41 319 51 77

General Email

moritz.roettger@gwf.ch

View All Listings by this Company

Range of water meters with epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1505 Water Meters

Size:

2½” BSP (M) connection. DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300 flanged connections.

Marking:

Resideo & Technical information on face. Size and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

EW1710AC5000 EW1710AC5600 EW1710AC6500 EW1710AC7300 EW1710AC8100 EW1710AC8500 EW1710AC8900 EW1710AC9100 EW1710AC9200

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 2.0 bar (AMS models), 4.0 bar (EDH & EMH models) 8.0 bar (LVS models). Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

LEO on cover. LEO, model & technical information on date label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

EDH (m)XX-XX-F-E 1.m: different phase. --m: single phase, none: three phase. 2.XX: Rated flow (m³/h, range:2~20 m³/h. 3.XX: Impeller progression x10, progression range:1~6. 4.F: F type motor 5.E：E type end connection mode and size -- Rated flow (2 m³/h) :G1"XG1" -- Rated flow (4 m³/h) :G1¼"XG1¼" -- Rated flow (10-20 m³/h) :G2"XG2" AMS(m)XXX-XX-E 1.m: different phase. --m: single phase，none: three phase 2.XXX: Rated flow（L/min） 3. XX: Rated power（kW）. 4.E：E type end connection mode and size -- Rated flow(70-120m³/h) : G1¼"XG1" -- Rated flow(210m³/h) :G1½"XG1¼" -- Rated flow (370 m³/h): G2"XG1¼" LVSXXX-XX-(1/2/C/D/2C/2D/C-D) -(B) -E 1.XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2.XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2，On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4.B: the materials of wetted parts --B，material is SUS 316. --None，material is SUS 304. 5.E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150 EMH (m)XX-XX\XX-SE 1.m: different phase. --m: single phase，none: three phase. 2.XX: Rated flow（m³/h），range: 2、3、4、8、10、12、16、20m³/h. 3.XX: impeller progession (1,2,3,4,5,6,7) 4.XX: Small Impeller（1,2,3,4,5, ） 5.SE: SE Intelligent Type End connection mode and size Rated flow (2、3m³ /h) :G1"XG1" Rated flow (4m³ /h) :G1¼"XG1" Rated flow (8、10、12m³ /h) :G1½"XG1½" Rated flow (16、20m³ /h) :G2"XG2"

Product Images

Manufacturer:

Leo Group Pump(Zhejiang) Co., Ltd

Company Name

Leo Group Pump(Zhejiang) Co., Ltd

Address

No 1,3rd street, East Industry Center,Wenling, Zhejiang, China

View All Listings by this Company

Range of booster sets consisting of two or four electronically controlled pumps, stainless steel manifold, spherical valves, expansion vessels and pressure gauge/transducers and non-return valves. Maximum operating pressure 16 bar. Maximum operating temperature 23°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241104704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1 ½” BSP (M) x 2” BSP (M) to 2" BSP (M) x 4" BSP (M).

Marking:

Stuart Turner on control panel.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

SPAV-B-C-D/E Where; A = number of pumps – 2,3,4. B = Pump Model Code based on supplier models – Lowara examples 3HM06S/5SV08, Ebara example 0306, Stuart Turner Example HM0306. (Code changes based on pump flow rate & number of stages). C = controller type – MAB or MARB. D = power input – 1 phase or 3 phase. E = vessel capacity – 24L, 48L or 72L.

Product Images

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range shower outlets and accessories with brass bodies (various finishes). The inlet of the overhead shower outlet incorporates a stainless steel strainer. Maximum operating temperature 85°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241015015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) or ½” BSP (M).

Marking:

ABI logo on body, or inlet connector or lateral surface of escutcheon.

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

Shower Arms: Shower Dropper Round 300mm Brushed Brass: 16111 Brushed Copper: 16112 Brushed Gunmetal: 16113 Brushed Nickel: 16114 Chrome: 16197 Matte Black: 16115 White: 16116 Shower Arm 400mm Brushed Brass: 16105 Brushed Copper: 16106 Brushed Gunmetal: 16107 Brushed Nickel: 16108 Chrome: 16196 Matte Black: 16109 White: 16110 Eden Shower Arm Brushed Brass: 16072 Brushed Copper: 16073 Brushed Gunmetal: 16074 Brushed Nickel: 16075 Chrome: 16067 Matte Black: 16076 White: 16077 Adjustable Hand Shower Holder Brushed Brass: 16099 Brushed Copper: 16100 Brushed Gunmetal: 16101 Brushed Nickel: 16102 Chrome: 16195 Matte Black: 16103 White: 16104 Round Shower BP Brushed Brass: 16117 Brushed Copper: 16118 Brushed Gunmetal: 16119 Brushed Nickel: 16120 Chrome: 16960 Matte Black: 16121 White: 16449 Shower handsets: Rounded Rectangle Hand Shower Brushed Brass: 10376 Brushed Copper: 10833 Brushed Gunmetal: 10822 Brushed Nickel: 10431 Chrome: 10251 Matte Black: 10249 White: 11589 Overhead shower: Shower Head Round 250mm Brushed Brass: 10380 Brushed Copper: 10830 Brushed Gunmetal: 10710 Brushed Nickel: 10365 Chrome: 10428 Matte Black: 10173 White: 11587

Approval Holder:

ABI Interiors Pty. Ltd.

Company Name

ABI Interiors Pty. Ltd.

Address

3/128 Kortum Drive, Burleigh Heads, Gold Coast QLD, 4220

Country

Australia

View All Listings by this Company

Range of overhead shower outlets, (brass bodies – various finishes) incorporating NBR O rings. Maximum operating temperature: 65C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241088001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only

Size:

½” BSP (F)

Marking:

Waterworks Logo on inlet connection

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

USH104 Universal Classic 4” Showerhead USH106 Universal Classic 6” Showerhead USH108 Universal Classic 8” Showerhead USH110 Universal Classic 10” Showerhead USH112 Universal Classic 12” Showerhead USH204 Universal Modern 4” Showerhead USH206 Universal Modern 6” Showerhead USH208 Universal Modern 8” Showerhead USH210 Universal Modern 10” Showerhead USH212 Universal Modern 12” Showerhead USH308 Universal Transitional 8” Rain Showerhead USH409 Universal Specialty 81/2” Rain Showerhead Finishes available – Brass, Chrome, Nickel, Burnished Brass, Burnished Nickel, Matte Nickel, Vintage Brass, Copper, Dark Brass, Carbon (Car)

Product Images

Approval Holder:

Waterworks

Company Name

Waterworks

Address

60 Backus Ave, Danbury, CT 06810

Country

USA

Phone

(203) 546 6140

View All Listings by this Company

Range of overhead shower outlets with brass or stainless-steel bodies (various finishes - see model), with NBR ‘O’-rings. The inlet incorporates a stainless-steel strainer.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2306090

Note:

Open outlet use only.

Size:

½” BSP (F).

Marking:

JTP on connector

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

IXGL200 (INOX STAINLESS STEEL ROUND SLIM GLIDE OVERHEAD SHOWER 200mm) IXGL300 (INOX STAINLESS STEEL ROUND SHOWERHEAD 300mm) GLR200 (GLIDE SLIM ROUND OVER HEAD SHOWER 200) GLR250 (GLIDE SLIM ROUND OVER HEAD SHOWER 250) GLR300 (GLIDE SLIM ROUND OVER HEAD SHOWER 300) GLR400 (GLIDE SLIM ROUND OVER HEAD SHOWER 400) GLS200 (GLIDE SLIM SQUARE OVERHEAD SHOWER 200 x 200) GLS250 (GLIDE SLIM SQUARE OVERHEAD SHOWER 250 x 250) GLS300 (GLIDE SLIM SQUARE OVERHEAD SHOWER 300 x 300) GLS400 (GLIDE SLIM SQUARE OVERHEAD SHOWER 400 x 400) 28200MB (VOS ROUND SHOWER HEAD 200MM MATT BLACK) 28250MB (VOS ROUND SHOWER HEAD 250MM MATT BLACK) 28300MB (VOS ROUND SHOWER HEAD 300MM MATT BLACK) L9901 (BOKER ROUND OVERHEAD SHOWER 200mm) 9201 (ROUND RAIN SHOWER 300mm) E044015 (ESPRITE OVERHEAD SHOWER 200mm) 38CM400MB (HIX CEILING MOUNTED400MM OVERHEAD SHOWER MATT BLACK) 33CM400BBR (HIX CEILING MOUNTED400MM OVERHEAD SHOWER BRUSHED BRASS) 37CM400BBL (HIX CEILING MOUNTED400MM OVERHEAD SHOWER BRUSHED BLACK)

Approval Holder:

Just Taps Plus UK Ltd

Company Name

Just Taps Plus UK Ltd

Address

Innovia House, Marish Wharf, St Mary's Rd, Langley

Postcode

SL3 6DA

Country

Berkshire

Phone

01895 44 22 11

General Email

info@jtpuk.co.uk

View All Listings by this Company