Range of cylindrical expansion vessels with epoxy coated or uncoated steel bodies and Butyl membranes. Maximum working pressure 10.0 Bar Maximum operating temperature 99.0°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

HYDROCHAUD - E. 2LTR - 50LTR - 3/4" - 1" BSP (M)

Marking:

GITRAL logo, model, max temp, pre charge pressure, capacity and other technical info on label on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

HYDROCHAUD-E (from 2LTR to 50 LTR)

Approval Holder:

Gitral

Company Name

Gitral

Address

Z.I. De Bournat, 63190 Orleat, France

View All Listings by this Company

The products incorporate two check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3), a pressure reducing valve adjustable between 1.0 bar and 3.0 bar (but pre-set at 2.5 bar for 523.815 model and 1.4 bar for the 523.816 model). The product incorporates a push type valve which allows water to flow when operated until the required pressure is achieved. There is a drain port below the push valve piston chamber. Compression connections are for use with copper pipe (manufactured to EN 1057). Maximum supply pressure 10.0 bar. Maximum operating temperature 80°C.

Section:

1015 Filling Loop

WRAS Approval Number:

250104713

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm compression.

Marking:

Officine Rigamonti spa logo, (the letters ‘OR’ within an oval), flow arrow, CR mark, size and pressure cast on body. Date of manufacture (MMYY) laser etched on body.

Installation Requirements:

R001 R511

Expiry date:

31/01/2030

Model:

523.815, 523.816.

Product Images

Approval Holder:

Officine Rigamonti spa

Company Name

Officine Rigamonti spa

Address

Località Molino Rastelli, 20 13018 Valduggia (VC)

Country

Italy

View All Listings by this Company

Manufacturer:

Officine Rigamonti Spa

Company Name

Officine Rigamonti Spa

Address

Via Circonvallazione 9, Officine Rigamonti spa 13018 Valduggia (VC)

Country

Italy

Phone

+39 0163 48 165 Fax: +39 0163347254

View All Listings by this Company

Range of filters with DZR brass bodies, stainless steel sieve. All models incorporate a drain tap and are supplied with a pressure gauge. Maximum working pressure 25.0 bar. Cold water use only.

Section:

1050 Filters and Housings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” – 2” BSP (M).

Marking:

DR, size, flow arrow on the body and Resideo, technical information on the adhesive label.

Installation Requirements:

R001 R511 R110 R120

Expiry date:

30/11/2029

Model:

F76S-1/2AAM, F76S-3/4AAM, F76S-1AAM, F76S-11/4AAM, F76S-11/2AAM, F76S-2AAM, F76S-1/2ACM, F76S-3/4ACM, F76S-3/4AEM, F76S-1ACM, F76S-11/4ACM, F76S-11/2ACM, F76S-2ACM.

Product Images

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

A range of black polyethylene electrofusion fittings from DN 20 to DN 1200 for use with PE100 and PE100-RC pipes conforming to EN 12201 or ISO 4427. A range of black polyethylene butt-welded fittings from DE 20 to DE 1200 fittings for use with PE100 and PE100-RC pipes conforming to EN 12201 or ISO 4427. Maximum working pressure: 20.0 bar for SDR 9 Maximum working pressure: 16.0 bar for SDR 11 Maximum working pressure: 10.0 bar for SDR 17. For above and below ground and cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241204003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Plastialia logo, DN, PE100-RC, model code hot stamped on fitting body

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

ELECTROFUSION FITTINGS PLASTFAST RANGE DN20 to DN400 PLAST RANGE DN450 to DN1200 BUTTWELDED FITTNGS PLAST RANGE DN 20 to DN1200 COUPLER MPXXXB - COUPLER SDR 17 - DN 90 – DN1200 MPXXXC - COUPLER SDR 11 - DN 20 – DN900 MPXXXG - COUPLER SDR 9 - DN 32 – DN450 ELBOW 90° GE9PXXXC - ELBOW 90° SDR 11 - DN 20 – DN315 ELBOW 45° GE4PXXXC - ELBOW 45° SDR 11 - DN 20 – DN 315 ELBOW 22.5° GE2250PXXXC - ELBOW 22,5° SDR 11 - DN 90 – DN 315 ELBOW 11,25° GE1125PXXXC - ELBOW 11,25° SDR 11 - DN 90 – DN 315 TEE 90° TEPXXXC - TEE 90° SDR 11 - DN 20 – DN 315 REDUCED TEE 90° TREPXXXC - REDUCED TEE 90° SDR 11 - DN 90 – DN 315 DN REDUCER REPXXXC - REDUCER SDR 11 - DN 25 – DN 315 END CAP CAEPXXXC - END CAP SDR 11 - DN 20 – DN 315 TAPPING TEE CPCPXXXC - TAPPING TEE SDR 11 - DN 40 – DN 315 CPCPVXXXC - VALVE TAPPING TEE SDR 11 - DN 63 – DN 315 SADDLE CPSPXXXC - SADDLE SDR11 – DN 20 – DN 900 SPIGOT END FITTING ADAPTER FOR FLANGES CPXXXB - ADATTATORE PER FLANGE SDR 17 - DN 90 – DN 1200 CPXXXC - ADATTATORE PER FLANGE SDR 11 - DN 20 – DN 900 CPXXXG - ADATTATORE PER FLANGE SDR 9 - DN 32 – DN 450 END CAPS CAPXXXB - END CAP SDR 17 - DN 90 – DN 1200 CAPXXXC - END CAP SDR 11 - DN 20 – DN 900 CAPXXXG - END CAP SDR 9 - DN 32 – DN 450 TEE 90° TPXXXB - TEE 90° SDR 17 - DN 90 – DN 630 TPXXXC - TEE 90° SDR 11 - DN 20 – DN 630 TPXXXG - TEE 90° FROM DE 63 TO DE 630 SDR 9 - DN 32 – DN 450 REDUCED TEE 90° TRPXXXB - REDUCED TEE 90° SDR 17 - DN 90 – DN 630 TRPXXXC - REDUCED TEE 90° SDR 11 - DN 90 – DN 630 TRPXXXG - REDUCED TEE 90° SDR 9 - DN 110 – DN 450 CROSS CRPXXXB - CROSS SDR 17 - DN 90 – DN 355 CRPXXXC - CROSS SDR 11 - DN 63 - DN, 355 TEES 45° T4PXXXB - TEE 45° SDR 17 - DN 90 – DN 160 T4PXXXC - TEE 45° SDR 11 - DN 20 – DN 160 ELBOW 90° G9PXXXB - ELBOW 90° SDR 17 - DN 90 – DN 630 G9PXXXC - ELBOW 90° SDR 11 - DN 20 – DN 630 G9PXXXG - ELBOW 90° SDR 9 - DN 63 – DN 450 ELBOW 45° G4PXXXB - ELBOW 45° SDR 17 - DN 90 – DN 630 G4PXXXC - ELBOW 45° SDR 11 - DN 20 – DN 630 G4PXXXG - ELBOW 45° SDR 9 - DN 63 – DN 450 DN REDUCER FITTINGS RPXXXB - REDUCER SDR 17 - DN 110 – DN 1200 RPXXXC - REDUCER SDR 11 - DN 25 – DN 900 RPXXXG - REDUCER SDR 9 - DN 250 – DN 450 TRANSITIONAL FITTINGS RTOMPXXXC - MALE TRANSITION PE/BRASS SDR 11 – DE 20x1/2”, 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” RTOFPXXXC - FEMALE TRANSITION PE/BRASS SDR 11 - DE 20x1/2”, 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” RTFZRPXXXC - MALE TRANSITION PE/STEEL SDR 11 - DE 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” 125x4”, 140x5”, 160x6”, 180x6”, 225x8”, 315x10” RTSRPXXXC - WELD TRANSITION PE/STEEL SDR 11 - DE 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” 125x4”, 140x5”, 160x6”, 180x6”, 225x8”, 315x10” First part explains the type of product (e.g. “M = coupler”, “GE9 = 90°elbow”, etc.) PXXXX is the dimension. B, C and G represent the different SDR.

Product Images

Manufacturer:

Plastitalia SpA

Company Name

Plastitalia SpA

Address

Via Ferrara SNC, Brolo 98061

Country

Italy

View All Listings by this Company

Range of WC dual flush drop valve comprising of a plastic body, silicone seating washer and an internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2107159

Size:

See models.

Marking:

Plumbright on the body. WRAS & Model code on body

Installation Requirements:

R001 R571

Expiry date:

31/07/2026

Model:

137004 PLUMBRIGHT: 1½” BSP (M),

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Country

United Kingdom

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company