‘CIM 70‐10’. Yellow coloured anaerobic adhesive paste. This product is to be applied and cured in strict accordance with the manufacturer's instructions. For use with water up to 85°C.

Section:

5520 Sealants - Screwed Joints

Section Subtitle:

Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions

WRAS Approval Number:

2312571

Expiry date:

31/12/2028

Approval Holder:

Cimberio S.p.A

Company Name

Cimberio S.p.A

Address

Via Torchio, 57 San Maurizio d’Opaglio

Postcode

28017

Country

Italy

Phone

+39.0322.923001

General Email

tguidetti@cimberio.it

View All Listings by this Company

'RIAMAXX HR XE4349 KTW natur. RIAMAXX HR XE4349 KTW schwarz. RIAMAXX HR XE4350 KTW natur. RIAMAXX HR XE4350 KTW schwarz. RIAMAXX HR XE4351 KTW natur. RIAMAXX HR XE4351 KTW schwarz. RIAMAXX HR XE4352 KTW natur. RIAMAXX HR XE4352 KTW schwarz'. Natural (appears beige) and black coloured, injection moulded Polyketone materials. For use with water up to 85°C.

Section:

5585 Thermoplastic Moulding Compound

Expiry date:

30/06/2029

Approval Holder:

RIA-Polymers GmbH.

Company Name

RIA-Polymers GmbH.

Address

Schwarzwaldring 2, 78658 Zimmern o.R, BW 78658

Country

Germany

View All Listings by this Company

'RIAMAXX HR GF40 Xgea14 KTW schwarz'. Black coloured, injection moulded Polyketone material. For use with water up to 85°C.

Section:

5585 Thermoplastic Moulding Compound

Expiry date:

30/06/2029

Approval Holder:

RIA-Polymers GmbH.

Company Name

RIA-Polymers GmbH.

Address

Schwarzwaldring 2, 78658 Zimmern o.R, BW 78658

Country

Germany

View All Listings by this Company

‘Wall mounted, electronically operated tap assemblies (brass bodies - in various finishes). The flow is controlled by a solenoid valve that is actuated via an infra-red sensor on the spout. The spout outlet incorporates plastic aerators. Maximum working pressure 6 bar. Maximum operating temperature 65°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

240604031

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP(M)

Marking:

Dolphin logo on spout.

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

DS101.bbb.d.ee DS102.bbb.d.ee DS103.bbb.d.ee DS104.bbb.d.ee ‘aaa’ denotes the style type, the following options are available: DS101 - 90° bent spout, DS102 - 90° bent spout with wall plate fixing kit, DS103 - 55° bent spout or DS104 - 55° bent spout with wall plate fixing kit. ‘bbb’ denotes the projection of the spout from wall to spout outlet in mm. Range 107mm – 330mm. ‘d’ denotes the surface finish (which is a non-water contact part). It will always be 1 digit and either a letter or numbers. As examples: 1 = brushed satin stainless steel, 3 = PVD coated brushed satin stainless steel. ‘ee’ denotes the surface colour (which is a non-water contact part) where applicable. It will always be 2 digits, which can be any combination of numbers and/or letters. As examples: 01 = RAL9005 Black, 51 = PVD Gold finish Models may include an additional ‘.R’ suffix which denotes that the tap is supplied without the rosette, or an additional ‘fff’ suffix to denote a non-standard size Rosette (which is a non-water contact part) It will always be 2-3 digits, which can be any combination of numbers and/or letters

Product Images

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

General Email

Ralph.Mumford@dolphinsolutions.com

View All Listings by this Company

Manufacturer:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

General Email

Ralph.Mumford@dolphinsolutions.com

View All Listings by this Company

Range of spring loaded resilient trim check valve cartridges with plastic bodies, stainless steel spring and EPDM ‘O’-rings. For insertion into fittings with specifically sized bores. Maximum working pressure 16 Bar Maximum operating temperature 65°C (model OV15/DN15-EPDM 31.0001.0 only) Maximum operating temperature 85°C for all other models

Section:

0026 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.

WRAS Approval Number:

240602711

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Neoperl, size, flow arrow and WRAS on body Note: flow arrow is not on model 31.0022.0

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

OF15/DN10-F1 31.0015.0 MODELS ADDED OCTOBER 2024 OF15/DN15-HT 31.0024.0 OV15/DN15-HT 31.0022.0 MODELS ADDED NOVEMBER 2024 OF15/DN10-F1-pr 31.0074.0 OF15/DN15 31.0006.0 OF15/DN15-GF 31.0007.0 OF15/DN15-pr 31.0069.0 OV15/DN15-EPDM 31.0001.0 Models added December 2024: OV15/DN15-pr 31.0070.0 OF15/DN15-EPDM 31.0032.0 Models added December 2024 OF20/DN20 31.4520.0 OF20/DN20-EPDM 31.0057.0 OF20/DN20-PR 31.4289.0 OV20-DN20-pr 31.0072.0 OV40/DN40 31.4240.0 OV50/DN50 31.4250.0 Models added June 2025: OV20/DN20-HT 31.0012.0 OV25/DN25-HT 31.0028.0

Product Images

Approval Holder:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company

Manufacturer:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company