Range of gate valves with brass bodies, brass wedges and PTFE seals. The valves are operated via a non-rising spindle with a hand wheel operating member. To be used with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

2107085

Size:

See model

Marking:

IDC logo (~E~ within a circle) and size on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

1GVA106: ½” compression. 1GVA108: ¾” compression. 1GVA110: 1” compression.

Product Images

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Ltd

Company Name

IDC Plumbing & Heating Technology (Beijing) Ltd

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC Fluid Control Co., Ltd.

Company Name

IDC Fluid Control Co., Ltd.

Address

Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

Country

China

General Email

View All Listings by this Company

Range of commercial dishwashers with flow controlled by a solenoid valve and discharged via a type AB air gap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 4.0 bar. Cold water use only.

Section:

2390 Washing Machines

Section Subtitle:

Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2107011

Size:

¾” BSP (F)

Marking:

Colged on front panel. Colged, Eurotec, model, serial number, date of manufacture (DD/MM/YYYY) and other product info on label on side panel.

Installation Requirements:

R001 R574

Expiry date:

31/07/2026

Model:

TopTech 34-23TD (rack 40x40), TopTech 35-23TD (rack 45x45), TopTech 36-23TD (rack 50x50), TopTech 36L-23TD (rack 50x60), TopTech 38-23TD (rack 50x50 hood type), TopTech 39-23TD (rack 50x60 hood type).

Product Images

Approval Holder:

Eurotec Srl div Colged

Company Name

Eurotec Srl div Colged

Address

Via Provinciale Romana 6-55010 Badia Pozzeveri Italy

View All Listings by this Company

Manufacturer:

Eurotec Srl div Colged

Company Name

Eurotec Srl div Colged

Address

Via Provinciale Romana 6-55010 Badia Pozzeveri Italy

View All Listings by this Company

Range of commercial dishwashers with flow controlled by a solenoid valve and discharged via a type AB air gap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 4.0 bar. Cold water use only.

Section:

2390 Washing Machines

Section Subtitle:

Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2107123

Size:

¾” BSP (F)

Marking:

Maidaid on front panel. Maidaid, model, serial number, date of manufacture (DD/MM/YYYY) and other product info on label on side panel.

Installation Requirements:

R001 R574

Expiry date:

31/07/2026

Model:

C525WS, C615WS, C2035WS, 525GS, 215GS, D525WS, EVOLUTION 425WS, EVOLUTION 525WS, EVOLUTION 535WS, EVOLUTION 2135WS, EVOLUTION 3135WS, AM H55WS & AM H95WS COMMERCIAL DISHWASHERS

Approval Holder:

Maidaid Halcyon

Company Name

Maidaid Halcyon

Address

The Engine Shed Top Station Road Brackley

Postcode

NN13 7UG

Country

Northants

Phone

+44 (0) 1280 845300

General Email

sales@maidaid-halcyon.co.uk

View All Listings by this Company

Range of commercial front loading, hood type & utensil washer type dishwashing machines with flow controlled by solenoid and discharged via type AB air gap (verified by test - suitable for backflow protection against fluid category 5) . The products are supplied with a grey coloured PVC supply hose. Maximum working pressure 6.0 bar. Maximum operating temperature 90°C.

Section:

2390 Washing Machines

Section Subtitle:

Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2109354

Size:

¾” BSP Captive nut.

Marking:

Hobart, manufacturers address, model no, serial no and other technical information on front casing.

Installation Requirements:

R001 R009 R520 R574

Expiry date:

30/09/2026

Model:

Frond loading: Design State: FG-16-01 Device Code: G404W-12B, G404SW-12B, G504W-10B, G504SW-10B, F504W-20B, F504SW-20B Design State: GCB-13-04 Device Code: ECO+G415W-10C, ECO+G415SW-10C Design State: GC-18-01 Device Code: GCW-10B, GCSW-20B, GCROIW-10B, GCPW-10B, GCPROIW-10B, GPW-10B, GPSW-10B, GPCROIW-10B Design State: FXB-12-04 Device Code: ECO+G515W-10C, ECO+G515SW-10C, ECO+F515W-10C, ECO+F515SW-10C Design State: FX-18-01 Device Code: FXW-10B, FXSW-10B, FXLW-10B, FXLSW-10B, FXSTDW-10B, careSW-10B, FPW-10B, FPSW-10B, GXCW-11B, GXCSW-11B, GXCROIW-11B, GXW-11B, GXSW-11B Hood type: Design State: AM-14-02 Device Code: H604W-12B, H604SW-12B Design State: AMB-14-03 Device Code: ECO+H615W-10C, ECO+H615SW-10C Design State: AMX-14-02 Device Code: AM900W-10B, AM900SW-10B, , AMXW-10B, AMXSW-10B ,AMXRW-10B, AMXRSW-10B, AMXXW-10B, AMXXSW-10B, AMXXRW-10B, AMXXRSW-10B, AUPW-10B, AUPSW-10B, AUPRSW-10B, AMXTW-10B, AUPTW-10B, AMXXLW-10B, AMXXLSW-10B, AUPLW-10B, AUPLSW-10B, Design State: TLW-18-01: Device Code: TLWW-10A, TLWSW-10A Utensil washer: Design State: UX-15-01 Device Code: UX-10A, UXS-10A, UXC-10A, UXCS-10A, UXRC-10A, UXRCS-10A, UXT-10A, UXTC-10A, UXTRC-10A, UXTH-10A, UXTLH-10A, UXTHR-10A, UXTLHR-10A, UP-10A, UPC-10A, UPRC-10A, UPT-10A, UPTC-10A, UPTRC-10A Design State: U-15-01 Device Code: ECOMAX702-11A, ECOMAX702W-11A Models added June 2022: Frond loading Design State: FXB-12-04 Device Code: FXBSW-10C, FXBSW-15C, FXBW-10C, FXLBSW-10C, GXBSW-11C, GXCBSW-11C Hood type Design State: AMB-14-03 Device Code: AMXBSW-10C, AMXBW-10C, AMXXBRSW-10C Utensil washer Design State: UXB-15-01 Device Code: UXB-10C, UXBS-10C, UXTB-10C, UXTHB-10C, UXTLHB-10C Explanation: “Design State” defines the type of Machine and the Production-Generation “Device Code” defines the Order Code for a special equipped machine

Product Images

Approval Holder:

Hobart GmbH

Company Name

Hobart GmbH

Address

Robert-Bosch-Str. 17 77656 Offenburg

Country

Germany

Phone

+49 781 600-0

General Email

info@hobart.de

View All Listings by this Company

Manufacturer:

Hobart GmbH

Company Name

Hobart GmbH

Address

Robert-Bosch-Str. 17 77656 Offenburg

Country

Germany

Phone

+49 781 600-0

General Email

info@hobart.de

View All Listings by this Company

Range of water conditioners incorporating a static PTFE and zinc anode in a brass or nickel plated bronze body. Between November 2021 and December 2023 the maximum working pressure is: ET/ETD models = 10.0bar, EF/EF-16 models = 16.0 bar, EF-40 models = 40.0 bar. From January 2024 the maximum working pressure is: ET/ETD/EF/EF-16 models = 16.0 bar & EF-40 models = 40.0 bar. Maximum operating temperature 60°C.

Section:

2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

Size:

½” BSP female - 2” BSP female inlet/outlet. DN50 flanged inlet - DN200 flanged inlet/outlet.

Marking:

ION Enterprises Ltd. Scalebuster, model and technical information on adhesive label on body.

Installation Requirements:

R001 R120 R170

Expiry date:

30/11/2026

Model:

ION SB03-ET ½”, ION SB06-ET ½”, ION SB07-ET ½”, ION SB10-ET ½”, ION SB12- ET ½”, ION SB19-ET ¾”, ION SB19-ETD ¾”, ION SB24-ET 1”, ION SB20-ET ¾”, ION SB25-ET 1”, ION SB32-ET 1-1/4”, ION SB40-ET 1-1/2”, ION SB50-ET 2”, ION SB50-EF 2” DN50, ION SB65-EF 2-1/2” DN65, ION SB80-EF 3” DN80, ION SB100-EF 4” DN100, ION SB125-EF 5” DN125, ION SB150-EF 6” DN150, ION SB200-EF 8” DN200, ION SB50-EF-40 2” DN50, ION SB65-EF-40 2-1/2” DN65, ION SB80-EF-40 3” DN80, ION SB100-E-40 4” DN100, ION SB125-EF-40 5” DN125, ION SB150-EF-40 6” DN150, ION SB200-EF-40 8” DN200.

Approval Holder:

Ion Enterprises Ltd.

Company Name

Ion Enterprises Ltd.

Address

4 Cedar Park, Cobham Road Ferndown Industrial Estate Wimborne

Postcode

BH21 7SF

Country

United Kingdom

General Email

jonathan.g@ionenterprisesgroup.com

View All Listings by this Company