Brass pressure test point. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¼” BSPT (M)

Marking:

HNH Logo, 85°C WRAS, 120°C

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Fig 631 Pressure Test Points

Approval Holder:

Hattersley

Company Name

Hattersley

Address

11-15 Epsilon Terrace West Road Ipswich Suffolk

Postcode

IP3 9FJ

Country

United Kingdom

Phone

0766465023

General Email

tturner@cranebsu.com

View All Listings by this Company

Stainless steel pressure transducer. Maximum working pressure 20.0 Bar. Maximum operating temperature 50.0°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

Applied Measurements labels attached to body

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

Pa6INF-20barsg-001.

Product Images

Approval Holder:

SUEZ Advanced Solutions UK Ltd T/A Inflowmatix

Company Name

SUEZ Advanced Solutions UK Ltd T/A Inflowmatix

Address

1 Venture Road Southampton Science Park , Hampshire

Postcode

SO16 7NP

Country

United Kingdom

General Email

brian.head@inflowmatix.com

View All Listings by this Company

Range of ‘Tcontrols’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

RT – 1.1/4” BSP (M) to 2.1/4” BSP (M) RF – 48 mm OD

Marking:

"Tcontrols" logo, Model, Voltage, Size and other information on cap.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Model Code: XXYZS Where XX denotes the boss type and can be replaced with any of the following: RT = Thread Type RF = Flange Type Where Y denotes the heating tube material and can be replaced with any of the following: 1 = Copper 2 = AISI 304 / AISI 304L 3 = AISI 321 4 = AISI 316 / AISI 316L 5 = Alloy 800 / Alloy 825 / Alloy 840 6 = Titanium 7 = AISI 309S 8 = AISI 310 Where Z denotes the brazing system and can be replaced with any of the following: A = Tin Alloy B = Silver Alloy C = Itek Brazing Where S denotes the surface enamelling and can be replaced with either of the following: S = Enamelled Blank = Not Enamelled

Approval Holder:

Thermowatt S.p.A.

Company Name

Thermowatt S.p.A.

Address

Via San Giovanni Battista 21 Arcevia

Postcode

60011

Country

Italy

Phone

+39 0731988246

General Email

thermowatt@legalmail.it

View All Listings by this Company

Plastic turbine for insertion into specifically dimensioned flow meters. Maximum operating temperature 85°C. Open outlet use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

19.17mm

Marking:

T moulded on body

Installation Requirements:

R001 R008

Expiry date:

30/04/2030

Model:

Model "T"

Approval Holder:

Elbi International Spa

Company Name

Elbi International Spa

Address

Via Italia 54 10093 Collegno (TO) Italy

View All Listings by this Company

Range of screwed gland cock valves with bronze bodies and a hose union outlet connection. Maximum working pressure: 10 Bar. Maximum operating temperature: 100°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP male x 14mm hose union ¾” BSP male x 20mm hose union 1” BSP male x 27mm hose union

Marking:

Boss, GM, H and size on body

Installation Requirements:

R001 R040

Expiry date:

31/12/2030

Model:

BOSS 81HU

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Manufacturer:

Y.S. Valve Manufacturing Co. Ltd.

Company Name

Y.S. Valve Manufacturing Co. Ltd.

Address

General Email

View All Listings by this Company

Electronically controlled advanced flow control pilot valve assembly with stainless steel body. Maximum working pressure 16.0 Bar Cold water use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

M16 threaded connection (M)

Marking:

i20 Water Ltd and model code on adhesive label on body

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

AMPV0011

Manufacturer:

i20 Water Ltd

Company Name

i20 Water Ltd

Address

Unit 2, Vancouver Wharf, Hazel Road

Postcode

SO19 7BN

View All Listings by this Company

Range of flow restriction blocks with a stainless-steel body and integral stainless-steel filter. Maximum working pressure 16.0 Bar Cold water use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/8” BSP M

Marking:

i20 Water Ltd and model number on adhesive label on body

Installation Requirements:

R001 R150

Expiry date:

31/05/2030

Model:

AMRB0002 AMRB0004

Manufacturer:

i2O Water Ltd

Company Name

i2O Water Ltd

Address

4 Benham Road Southampton Science Park Southampton

Postcode

SO16 7QJ

Country

Hampshire

Phone

02380 111 420

View All Listings by this Company

Heat pump kit incorporating flow and temperature sensors with stainless steel and plastic bodies. Maximum working pressure 5.0 Bar. Maximum operating temperature 90.0°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

R3/4" (M) Straight coupler

Marking:

Fujikoki logo, flow arrow and other technical data on body of flow sensor

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

Q-1SCK

Approval Holder:

Mitsubishi Electric Air Conditioning Systems Europe Ltd.

Company Name

Mitsubishi Electric Air Conditioning Systems Europe Ltd.

Address

Nettlehill Road, Houston Industrial Estate, Livingston, Scotland

Postcode

EH54 5EQ

Phone

01506 - 44 55 00

General Email

mark.fletcher@m-ace.mee.com

View All Listings by this Company

Manufacturer:

Fujikoki

Company Name

Fujikoki

Address

1-22-18, Harigaya, Utsunomiya-City, 321-0137, Tochigi Prefecture

Country

Japan

General Email

View All Listings by this Company

Range of flexible joints incorporating an EPDM (inner & outer) joint with a steel reinforcing ring and two carbon steel flanges. Maximum operating pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

1530 Miscellaneous Fittings

Size:

see model

Marking:

GENEBRE on the flexible connection. GENEBRE, DN, connection type & length on label on product On the flange: DIN PN 10/16 1.0038

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

2831 07 (DN32), 2831 08 (DN40), 2831 09 (DN50), 2831 10 (DN 65), 2831 11 (DN80), 2831 12 (DN100), 2831 13 (DN 125), 2831 14 (DN150).

Product Images

Approval Holder:

Genebre, S.A

Company Name

Genebre, S.A

Address

Poligono Industrial Pedrosa, Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat

Postcode

08908

Country

Spain

Phone

(+34) 93 298 80 00

General Email

cazorla@genebre.es

View All Listings by this Company

Range of ‘SureCal’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

RT – 1.1/4” BSP (M) to 2.1/4” BSP (M) RF – 48 mm OD

Marking:

'SureCal' logo, Model, Voltage, Size and other information on label.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Model Code: XXYZS Where XX denotes the boss type and can be replaced with any of the following: RT = Thread Type RF = Flange Type Where Y denotes the heating tube material and can be replaced with any of the following: 1 = Copper 2 = AISI 304 / AISI 304L 3 = AISI 321 4 = AISI 316 / AISI 316L 5 = Alloy 800 / Alloy 825 / Alloy 840 6 = Titanium 7 = AISI 309S 8 = AISI 310 Where Z denotes the brazing system and can be replaced with any of the following: A = Tin Alloy B = Silver Alloy C = Itek Brazing Where S denotes the surface enamelling and can be replaced with either of the following: S = Enamelled Blank = Not Enamelled

Approval Holder:

Thermowatt S.p.A.

Company Name

Thermowatt S.p.A.

Address

Via San Giovanni Battista 21 Arcevia

Postcode

60011

Country

Italy

Phone

+39 0731988246

General Email

thermowatt@legalmail.it

View All Listings by this Company