'Dicoat Medium Temp Black'. Factory applied, black coloured bitumen coating. Apply at a Relative Humidity of below 60% as per manufacturer's user instructions reference 'SPL/RD/UI/2019100121', issue no. '01' dated 08.07.2020. Cure for 7 days@30°C. For use with water up to 23°C. This material is only approved for the RH & curing conditions that appear on the approval. If the RH and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

251155070

Expiry date:

30/11/2030

Approval Holder:

Shalimar Paints Limited

Company Name

Shalimar Paints Limited

Address

Nashik Mumbai NH Road, Gonde, Nashik, Maharashtra 422403

Country

India

View All Listings by this Company

'HT204.V2'. Grey coloured carbon bearing, pressed, sintered, impregnated with phenolic resin and rebaked. For use with water up to 85°C.

Section:

5022 Carbon

Expiry date:

31/03/2030

Approval Holder:

Eurocarbo S.p.A

Company Name

Eurocarbo S.p.A

Address

Via S. Scolastica 35, Corropoli, 64013

Country

Italy

Phone

0861 839020

General Email

info@eurocarbo.it

View All Listings by this Company

'Jotapipe AC 1003 Green'. Factory applied, green coloured Fusion Bonded Epoxy coating. Apply as per manufacturer's TDS issued '25 May 2022'. Cure for 110 seconds@232°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

260155025

Expiry date:

31/01/2031

Approval Holder:

Jotun India Pvt Ltd.

Company Name

Jotun India Pvt Ltd.

Address

D-280 Ranjangao MIDC, Village Karegaon, Tal-Shirur, Pune-412220

Country

India

View All Listings by this Company

'Coating F8'. Factory applied, grey coloured DLC coating. Apply as per Work Instructions dated 4. Feb 2026. No cure required. For use with water up to 85°C.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

241055087

Expiry date:

31/10/2029

Approval Holder:

Flühs Drehtechnik GmbH

Company Name

Flühs Drehtechnik GmbH

Address

Lösenbacher Landstr. 2, D-58515 Ludenscheid - Brugge

Country

Germany

View All Listings by this Company

'EM6/35/7541/1 Vitrecoat'. Factory applied, dark blue coloured Porcelain (vitreous) enamel coating. Apply as per manufacturer's instructions 'IS_003', 'rev. 01'. Cure for 16 min 875°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250355098

Expiry date:

31/03/2030

Approval Holder:

Commercial Hot Water Solutions Ltd.

Company Name

Commercial Hot Water Solutions Ltd.

Address

Unit 71/72 Gazelle Road, Weston Industrial Estate, Weston Super Mare, North Somerset

Postcode

BS24 9ES

View All Listings by this Company