'Tuffkote Bituminous Aluminium'. Factory applied, grey coloured, two-component crude oil bitumen coating. Mix in a 17.1:2.9 volume ratio and apply as per manufacturer's data sheet 'SPL/PMG/2019100166', 'Rev 2', dated '04/2024'. Cure for 7 days@30°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

250355077

Expiry date:

31/03/2030

Approval Holder:

Shalimar Paints Ltd.

Company Name

Shalimar Paints Ltd.

Address

A1 & A2, UPSIDC Industrial Area, Sikandrabad, Distt. Bulandshahr, Sikandrabad, Uttar Pradesh, 203205

Country

India

View All Listings by this Company

'GIX96W-BR & GIX99.7W-BR'. Cream coloured ceramic bearing rings manufactured by pressing, sintering & re-working. For use with water up to 85°C.

Section:

5023 Ceramic

Expiry date:

30/04/2030

Approval Holder:

Gimex Technische Keramiek, a division of Ammertech BV

Company Name

Gimex Technische Keramiek, a division of Ammertech BV

Address

Grasbeemd 21, 5705 DE Helmond

Country

Netherlands

View All Listings by this Company

'Powercron 805 B'. Factory applied, blue coloured Acrylic coating. Apply as per manufacturer's TDS 'CR805B/CP826', dated 'Sep 12, 2024'. Cure for 30 minutes@180°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250455025

Expiry date:

30/04/2030

Approval Holder:

PPG Industries France

Company Name

PPG Industries France

Address

3, Z.A.E Les Dix Muids BP 89, 59583 Marly Cedex

Country

France

Phone

+333 27149700

View All Listings by this Company

'VETOPROOF EC722'. Site applied, grey coloured, two-part epoxy coating. Mix parts A and B in a 85.4:14.6 weight ratio and apply three coats as per manufacturer's Method Statement 'MoS-SA-G1101-M-AK-09-23', dated '18 September 2023'. Cure first coat for 24 hours at 23°C, second coat for 24 hours at 23°C and third coat for 7 days at 23°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

250455039

Expiry date:

30/04/2030

Approval Holder:

Saudi Vetonit Co. Ltd. (SAVETO)

Company Name

Saudi Vetonit Co. Ltd. (SAVETO)

Address

PO Box 52235, Riyadh 11563

Country

Saudi Arabia

View All Listings by this Company

'Hinton Easyjoint Silicone Grease (HSG200)'. Off-white coloured (opaque) silicone grease. Apply as per manufacturer's instructions. For use with water up to 65°C.

Section:

5160 Lubricants

Expiry date:

28/02/2026

Approval Holder:

CWB Wholesale

Company Name

CWB Wholesale

Address

Unit 20 Beacon Business Park, Norman Way, Caldicot

Postcode

NP26 5PY

View All Listings by this Company