Range of cold water supply booster sets, consisting of between 2 & 4 pumps, modular stainless steel manifold system, servicing valve, non-return valve (not suitable for backflow protection) and an expansion vessel. Maximum working pressure 10.0 bar or 16.0 bar (identified on adhesive label on expansion vessel) Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2304317

Size:

DN50 to DN150

Marking:

Dutypoint Ltd. model, serial number and other technical information on adhesive label on base.

Installation Requirements:

R001 R415

Expiry date:

30/04/2028

Model:

VT2-05-xxxx VT2-10-xxxx VT2-15-xxxx VT2-20-xxxx VT3-05-xxxx VT4-05-xxxx VT3-10-xxxx VT3-15-xxxx VT3-20-xxxx VT4-10-xxxx VT4-15-xxxx VT4-20-xxxx Example of model: VT2-05-015T xxxx on end of model codes above denotes all motor size and type. Range: VT. Number of Pumps: 2. Nominal flow rate: (m³/hr) 05. Motor kW: (without decimal)15 (1.5kw). Voltage: (T=400/3/50 M=230/1/50) T

Product Images

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Manufacturer:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Range of circulator pumps with brass bodies, plastic impellor, and EPDM ‘O’-rings and seals. The COMFORT 15-14 BX prefix models incorporate a screwdriver operated isolation valve on the inlet and a non-return valve at the outlet. These are housed within 1” BSP (M) x ½” BSP (M) adaptors. Maximum working pressure 10.0 Bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2304909

Size:

COMFORT 15-14 B prefix models: ½” BSP (F). COMFORT 15-14 BX prefix models: 1” BSP (M).

Marking:

Grundfos on body. Model on adhesive label on body. Flow arrow on the isolation valve.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

COMFORT 15-14 B PM GB, COMFORT 15-14 BX PM GB, COMFORT 15-14 BDT PM GB, COMFORT 15-14 BXDT PM GB, COMFORT 15-14 BA PM GB, COMFORT 15-14 BXA PM GB. Models added October 2024: COMFORT 15-14 B T GB, COMFORT 15-14 B GB, COMFORT 15-14 BX T GB, COMFORT 15-14 BX GB, COMFORT 15-14 B TDT GB, COMFORT 15-14 BX TDT GB, COMFORT 15-14 B TA GB, COMFORT 15-14 BX TA GB. Model keycode: Pump type: COMFORT, 15: Length 80mm, 14: Maximum head [14 dm], B: Brass pump, X: Fittings included (see product description), Blank = No fittings, Control mode, 1-4 characters. Blank: Basic (always on), T: Thermostat, DT: Digital timer, A: AutoAdapt. PM: Permanent magnet (Designation removed October 2024). GB: Sales region.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of multistage pumps (VL, VLE and CL series) and submersible pumps (VN, VNE CN, ES and CS series) with stainless steel bodies and impellers and NBR gaskets and ‘O’-rings. Maximum working pressure 15.0 bar (VL, VLE and CL series pumps only).

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2303041

Note:

VN, VNE, CN, ES and CS series submersible pumps: The level control assembly (cable and level control) are not covered under the scope of this approval. These pumps are also open outlet use only.

Size:

VL, VLE and CL series: 1 ¼” Female BSP inlet x 1 ½” Female BSP outlet. VN, VNE and CN series: 1 ¼” Female BSP outlet - 2" Female BSP outlet. ES and CS series: 1 ¼” Female BSP outlet.

Marking:

Franklin electric Srl logo, WRAS, model no., serial no., pressure and date of manufacture (DD/MM/YYY) on body.

Installation Requirements:

R001 R415

Expiry date:

31/03/2028

Model:

Existing: VNx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CN/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, VLx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CL/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, ESx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CS/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D. Where: VN, CN, VL, CL, ES, CS = Series name. VN/VL/ES series “E-TECH” brand, CN/CL/CS Series “FPS” brand. x1 = Nominal Flow: 3, 5, or 9. (9 is not available on ES and CS models) xx2 = number of impellers, (depending on Nominal Flow and Frequency): 2 to 10 (VN/CN & VL/CL models), 2 to 8 (ES/CS models). I = Material: St/Steel 1.4301 (AISI304). xxx3 = Motor Power (kW x 10): 005, 007, 009, 011… x4 = Supply (no phase): T: three phase, M: single phase. x5 = Frequency (Hz): 5: 50 Hz, 6: 60 Hz. x6 = Motor Configuration: L: Bi-phase, 90° single-phase, D: Three-phase, triangle), Y: Three-phase, star. N = Mechanical seal elastomer: N: NBR. x7 = Mechanical Seal surface: 1: Graphite/Silicon Carbide, 2: Silicon Carbide/Silicon Carbide. x8 = Float Switch: 0: without. B = Cable type: B: Blue. x9 = Cable size: A: 4G1, B: 4G1.5, C: 3G1, D: 3G1.5. x10 = Cable length: O: 20m (VN/CN and ES/CS models), E: 5m (VL/CS models). x11 = Control Panel (not in contact with liquid): 0: without), 1: connected (VN/CN models only). N = Nude terminal (not in contact with liquid). x12 = Option (only on VN/CN models) - Discharge head (”): Empty: 1¼” Nickel plated brass, I: 1¼” Inox, J: 2” Inox. D = Drinking water approved. -------------------------------------------- From November 2025 VNE and VLE models added + new naming structure as follows: VN or VNEx1/xx2 x3xxx4 x5x6x7 x8 xxx9Bx10x11xxx12, VL or VLE x1/xx2 x3xxx4 x5x6x7 x8 xxx9Bx10x11xxx12. Where: VN, VNE, VL, VLE = Series name. VN/VNE/VL/VLE series “Franklin Electric” brand. x1 = Nominal Flow: 3, 5, or 9 (VN and VL series). 3, 6, or 10 (VNE and VLE series). xx2 = number of impellers, (depending on Nominal Flow and Frequency): 2 to 10. x3 = Suction: S: Screened (submersible application), I: Inline (for surface dry application). xxx4 = Motor Power (kW x 10): 005, 007, 009, 011… x5 = Supply: T: three phase, M: single phase. x6 = Frequency (Hz): 5: 50 Hz, 6: 60 Hz. x7 = Voltage: 1: 115V, 2: 230V, 3: 280V, 4: 460V. x8 = Float Switch: 0: without. xxx9 - Mechanical seal: QQP: Silicon Carbide/Silicon Carbide/NBR. B = Cable type: B: Blue. x10 = Cable length: 05: 5m (VL/VNE/VLE models), 20: 20m (VN/VNE models). x11 = Plug: (“Blank”) Without plug. x12 = Discharge head dimension: R14: Rp 1¼” thread (Inox), R20: Rp 2” thread (Inox) (VN/VNE models only). -------------------------------------------- ESx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CS/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D. Where: ES, CS = Series name. ES series “E-TECH” brand, CS Series “FPS” brand. x1 = Nominal Flow: 3 or 5. xx2 = number of impellers, (depending on Nominal Flow and Frequency): 2 to 8. I = Material: St/Steel 1.4301 (AISI304). xxx3 = Motor Power (kW x 10): 005, 007, 009, 011… x4 = Supply: T: three phase, M: single phase. x5 = Frequency (Hz): 5: 50 Hz, 6: 60 Hz. x6 = Motor Configuration: L: Bi-phase, 90° single-phase, D: Three-phase, triangle, Y: Three-phase, star. N = Mechanical seal elastomer: N: NBR. x7 = Mechanical Seal surface: 1: Graphite/Silicon Carbide, 2: Silicon Carbide/Silicon Carbide. x8 = Float Switch: 0: without. B = Cable type: B: Blue. x9 = Cable size: A: 4G1, B: 4G1.5, C: 3G1, D: 3G1.5. x10 = Cable length: O: 20m. x11 = Control Panel (not in contact with liquid): 0: without. N = Nude terminal (not in contact with liquid). D = Drinking water approved.

Product Images

Approval Holder:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

Range of single (SSR) and twin (STR) ended shower booster pumps with plastic bodies, stainless steel motor shaft, plastic impellors and NBR ‘O’-rings. Supplied with stainless steel strainers. Maximum working pressure 3.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2305012

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating a 22mm pushfit connection.

Marking:

Grundfos logo, model and other technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2028

Model:

STR2-1.5 C, STR2-2.0 C, SSR2-2.0 C.

Product Images

Approval Holder:

Grundfos Watermill Ltd.

Company Name

Grundfos Watermill Ltd.

Address

Enterprise Way Edenbridge

Postcode

TN8 6HF

Country

United Kingdom

Phone

01525 775425

General Email

rpeters@grundfos.com

View All Listings by this Company

Manufacturer:

Grundfos Watermill Ltd.

Company Name

Grundfos Watermill Ltd.

Address

Enterprise Way Edenbridge

Postcode

TN8 6HF

Country

United Kingdom

Phone

01525 775425

General Email

rpeters@grundfos.com

View All Listings by this Company

Range of vertical multistage pumps with either stainless-steel bodies (“N” versions) or cast iron bodies with a black electrodeposition coating (“G” versions), stainless-steel impellers, shaft and outer sleeve. Maximum working pressure: EV30, EV45, 30VR & 45VR models - 32.0 bar, EV65, EV95, 65VR & 95VR models - 25.0 bar. Max operating temperature: Stainless steel (“N” versions) - 100°C. Cast iron (“G” versions) - Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2305073

Size:

DN65 - DN100

Marking:

Franklin electric S.r.l logo, serial number, model number, date of manufacture (DD/MM/YYYY) and pressure on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2028

Model:

EV and VR ranges. Code example (EV range): EV 30 /13 A B C D E F G H J K L M N. Where: EV = Pump model EV (EV = E-Tech “brand”). 30 = Rated flow [m³/h] (varies: 30-95). /13 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round. C = Materials: "G" - (cast iron/Stainless steel); "N" - (AISI316/EN1.4401). D = Motor power (kW x 10). E = Motor type: “Vacuum” (pump without motor), "T" - 3-phase; "M" - 1-phase. F = Frequency: "5" - 50Hz; "6" - 60Hz. G = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. H = Mechanical Seal: "B" (balanced). J = Elastomeric and mechanical seal material: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = “IE…” motor efficiency class IEC60034-30, where applicable, “Vacuum” (pump without motor). L = “Vacuum” standard version,“M” (oversized motor). M = "Vacuum” - standard version. N = Motor voltage, “Vacuum” (pump without motor). EV30: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); EV45: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); EV65: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A(60 hz); EV95: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz). Code example (VR range): 30 VR0700 A B C X-XXXX. Where: 30 = Rated flow [m³/h] (varies: 30-95). VR = Pump model (VR = FPS “brand”). 07 = No. of stages/impellers. (See model and stages below for more detail). 00 = Impeller trim: 00 = no trim, A1 = 1A (one trimmed impeller), A2 = 2A (two trimmed impellers). A = Materials: "G" - (cast iron/304SS); "N" - (AISI316/EN 1.4401). B = Flange type: "F" - round. C = Mechanical Seal: “A” - (BQBE, BE1); “B” - (BQQE, BE2). X-XXXX = Combination of numbers and letter relating to frame, speed, motor and electronics (does not affect water pathways). Last two digits can be empty for versions without a motor. 30VR: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); 45VR: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); 65VR: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A (60Hz); 95VR: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz).

Product Images

Approval Holder:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

Manufacturer:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company