‘Monsoon Standard’ range of single and twin ended shower booster pumps with brass bodies, brass impellers, EPDM seals and NBR ‘O’-rings. The inlet(s) of the pump body incorporate(s) a plastic strainer. Models with push fit connections include an integral isolation valve. Pushfit connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240504702

Note:

R007 & R009 applies to the 21mm & 22mm pushfit inlet/outlet hoses.

Size:

44428 - Monsoon S1.5 bar Twin EXIP model: ¾” BSP (M) (inlet/outlet). ROI suffix models: Stainless steel braided EPDM lined flexible hose assemblies incorporating 21mm push-fit end connections (inlet/outlet). EXP suffix models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ¾” captive nut end connections (inlet/outlet). All other models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating 22mm push-fit end connections (inlet/outlet).

Marking:

Stuart Turner, model no., serial no, part no., pressure rating, Monsoon, manufacturer’s address and other technical information on adhesive label on body.

Installation Requirements:

R001 R007 R009 R415

Expiry date:

31/05/2029

Model:

46420: Monsoon S4.5 bar Single, 46419: Monsoon S3.0 bar Single, 46418: Monsoon S4.5 bar Twin, 46417: Monsoon S4.0 bar Twin, 46416: Monsoon S3.0 bar Twin, 46415: Monsoon S2.0 bar Twin, 46506: Monsoon S1.5 bar Twin, 44754: Monsoon S1.5 bar Twin, 46497: Monsoon S2.0 bar Single, 44424: Monsoon S1.5 bar Twin, 44423: Monsoon S2.0 bar Twin, 44422: Monsoon S2.0 bar Single, 44428: Monsoon S1.5 bar Twin EXIP, 46420ROI: Monsoon S4.5 bar Single, 46419ROI: Monsoon S3.0 bar Single, 46418ROI: Monsoon S4.5 bar Twin, 46417ROI: Monsoon S4.0 bar Twin, 46416ROI: Monsoon S3.0 bar Twin, 46415ROI: Monsoon S2.0 bar Twin, 46506ROI: Monsoon S1.5 bar Twin, 46497ROI: Monsoon S2.0 bar Single, 46420EXP: Monsoon S4.5 bar Single, 46419EXP: Monsoon S3.0 bar Single, 46418EXP: Monsoon S4.5 bar Twin, 46417EXP: Monsoon S4.0 bar Twin, 46416EXP: Monsoon S3.0 bar Twin, 46415EXP: Monsoon S2.0 bar Twin, 46506EXP: Monsoon S1.5 bar Twin, 46497EXP: Monsoon S2.0 bar Single.

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Manufacturer:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of horizontal or vertical multi-stage pumps with a stainless-steel body (HM models) or cast iron body with blue coloured cationic resin coating (VM models), incorporating either plastic or stainless-steel impellers (see model), stainless steel sleeve, EPDM gaskets and seals. Maximum working pressure 10.0 bar / 16.0 bar (see models). Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240206701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

HM models: 1” - 2” BSP (F) VM models: 1¼” - 1½” BSP (F).

Marking:

Lowara or Goulds Water Technology (both brands of Xylem), manufacturer and address, model number, serial number, maximum working pressure and technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

28/02/2029

Model:

1HM, 3HM, 5HM, 10HM, 15HM & 22HM. 1VM, 3VM, 5VM & 10VM. Model nomenclature: W XXX YY Z EM Where: W - flow rate (m3/h), either 1, 3, 5, 10, 15, or 22. XXX - Model type: Horizontal (HM) or Vertical (VM) mode, where last (optional) digit can denote the variable speed drive as follows: Null = standard asynchronous motor, H = equipped with Hydrovar, X = other drives, E = e-SM. YY - Number of impellers/stages HM models: 2-25 stages only (02-25), VM models: 2-8 stages only (02-08). Z - Material, where: (P) is plastic impeller and SS AISI 304 body (HM & VM models), (S) is SS AISI 304 impeller and body (HM models only), (N) is SS AISI 316 impeller and body (HM models only). E = 5 - 6 digits for electrical specification. M = 3 digits, where: 1st digit: Mech. rotary seal - V = Aluminium oxide (Ceramic), or Mech. rotary seal - Q = Silicon carbide (Ceramic). 2nd digit: Mech. stationary seal - B = Carbon resin impregnated. 3rd digit: Mech. seal elastomers - E = EPDM. Example code: 1HM03P05M5HVBE. Max Working Pressure for VM models → 10 bar. Max Working Pressure for HM models with stainless steel impellers and QBE Mechanical Seal → 16 bar (Depending on number of stages - see below), Max Working Pressure for HM models with plastic impellers and/or VBE Mechanical Seal → 10 bar (Depending on number of stages - see below). 1HM (P)/(S)/(N) 1-16 stages - 10.0 bar, 1HM (S)/(N) 18-25 stages - 16.0 bar. 3HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 3HM (S)/(N) 14-21 stages - 16.0 bar. 5HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 5HM (S)/(N) 14-21 stages - 16.0 bar. 10HM (P)/(S)/(N) 1-8 stages - 10.0 bar, 10HM (S)/(N) 9-13 stages - 16.0 bar. 15HM (S)/(N) 2-7 stages - 10.0 bar, 22HM (S)/(N) 2-5 stages - 10.0 bar.

Approval Holder:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Manufacturer:

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Company Name

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Address

View All Listings by this Company

Range of multistage pumps with stainless steel bodies, impellers, shaft and outer sleeve. SC family models are submersible pumps. SCD family models are surface pumps only. SCDS family models can be used either as a surface pump or as a submersible pump. SCD/SCDS models: Maximum working pressure 10.0 bar. SC models: Open outlet use only. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240202717

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SC models: Suction fed inlet x 1¼" BSP (F) outlet. SCD/SCDS models: 1¼" BSP (F) inlet/outlet.

Marking:

Xylem, Lowara, CE, model and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

28/02/2029

Model:

Model Code: XAAY/ZZ/F Where: X denotes the flow rate: This can be any digit 1 to 8. AA denotes the family code: SC (without float switch option only). SCD. SCDS (without float switch option only). Y denotes the stages: This can be any digit 2 to 9. ZZ/F: all the subsequent digits/letters are related to electrical features.

Approval Holder:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Range of submersible pumps with stainless steel bodies and impellers and NBR gaskets and ‘O’-rings. Cold water use only. .

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2303082

Note:

The level control assembly (cable and level control) are not covered under the scope of this approval. These pumps are also open outlet use only.

Size:

1 ¼” Female BSP outlet.

Marking:

Stuart Turner, model no., serial no., pressure and date of manufacture (DD/MM/YYY) on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/03/2028

Model:

47064 47065 47066 47070 47071 47072

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of wall or ceiling mounted shower outlets with plastic bodies (various finishes) and brass shower arms (various finishes, incorporating EPDM O-rings and plastic flow regulators. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240608001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Products with ceiling connectors are to be installed with 24 010 180 basic set. 24 010 180 basic set is not approved in it's own right.

Size:

See models Products with ceiling connectors are to be installed with 24 010 180 basic set

Marking:

Hansgrohe on shower plates (Models 24 003, 24 013, 24 002 & 24 012). AXOR on shower plate (Models 35 274, 35 278 & 35 277).

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

24 002 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower with ceiling connector 24 002 600 - Hansgrohe | Rainmaker Select 460 1jet overhead shower with ceiling connector 24 003 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower - 1/2" BSP (M) 24 003 600 - Hansgrohe | Rainmaker Select 460 1jet overhead shower - 1/2" BSP (M) 24 012 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower EcoSmart 9 l/min with ceiling connector 24 013 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower EcoSmart 9 l/min - 1/2" BSP (M) 35 274 xx0 - AXOR ShowerSolutions Overhead shower 460 / 300 1jet - 1/2" BSP (M) 35 277 xx0 - AXOR ShowerSolutions Overhead shower 460 / 300 1jet with ceiling connector 35 278 xx0 - AXOR ShowerSolutions Overhead shower 460 / 300 1jet - 1/2" BSP (M) 24 010 180 - Hansgrohe | Rainmaker Select Basic Set - 1/2" BSP (F)

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company