Range of in-line water meters with brass or plastic bodies. Inlet incorporates a strainer. Maximum working pressure 16.0 Bar Maximum operating temperature 23°C

Section:

1505 Water Meters

Size:

¾” BSP (M), 1” BSP (M), 1¼” BSP (M), 1½” BSP (M) or 2” BSP (M) (see models)

Marking:

Sensus, model and product information on dial face. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

620C DN15 (Composite, ¾”) 620C DN20 (Composite, 1”) 640C DN15 (Composite, ¾”) 640C DN20 (Composite, 1”) 620MC (Composite, 1½”) 640MC (Composite, 1½”) 642 DN20 (Composite, 1½”) 620M (Brass, 1½”) 620 DN15 (Brass, ¾”) 620 DN20 (Brass, 1”) 620 DN25 (Brass, 1¼”) 620 DN32 (Brass, 1½”) 620 DN40 (Brass, 2”) 640M (Brass, 1½”) 640 DN15 (Brass, ¾”) 640 DN20 (Brass, 1”) 640 DN25 (Brass, 1¼”) 640 DN32 (Brass, 1½”) 640 DN40 (Brass, 2”)

Approval Holder:

Sensus UK Systems Ltd

Company Name

Sensus UK Systems Ltd

Address

North Wing Central 40, Crockford Lane, Basingstoke, RG24 8GU

Country

Basingstoke

View All Listings by this Company

“CZ 3000” range of water meters with brass bodies and plastic turbines. The inlets incorporate plastic filters. The outlets are fitted with approved check-valve cartridges (however, the complete product has not been fully tested for and is not intended to provide backflow protection). Maximum working pressure 16.0 bar. Maximum operating temperature 30°C.

Section:

1505 Water Meters

Size:

See models.

Marking:

CONTAZARA, date of manufacture (yyyy) on plastic body, PN, “CZ3000s”, size and flow arrow.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Series “CZ 3000” consisting of following articles: CZ3000 15mm K2 brass (3/4”–¾”), CZ3000 15mm K3 brass (3/4”–¾”), CZ3000 15mm K4 brass (7/8” – 3/4"), CZ3000 25mm brass (1 1/4” - 1 1/4”), CZ3000 32mm brass (1 1/2" - 1 1/2"), CZ3000 40mm brass (2” – 2”).

Approval Holder:

Contazara SA

Company Name

Contazara SA

Address

Ctra Castellon Km 5,5. 50720 Zargosa

Country

Spain

View All Listings by this Company

Manufacturer:

Contazara SA

Company Name

Contazara SA

Address

Ctra Castellon Km 5,5. 50720 Zargosa

Country

Spain

View All Listings by this Company

Range of (below ground) water meter manifolds (gunmetal bodies), meter carriers (DZR brass bodies) and stopcock carriers (gunmetal bodies). All meter carriers incorporate a non-return valve. All manifold ports and the stopcock carriers incorporate a non-rising spindle stopcock with a T shaped operating member. Maximum working pressure: 16.0°C Cold water use only.

Section:

1510 Water Meter Manifolds

Size:

1/2" BSP (M) x 1.1/2" BSP (M) union adaptor, 1.1/2" BSP (F) manifold & ¾” BSP (F) carriers.

Marking:

Waterfit, WF logo & size on union nut. WF and flow arrow on meter carrier and stopcock carrier. CR Mark on DZR caps.

Installation Requirements:

R001 R008

Expiry date:

31/10/2028

Model:

MAI275002587 (2 Port Manifold) MAl375002588 (3 Port Manifold) MAl475000380 (4 Port Manifold) MAl575000381 (5 Port Manifold) MAI675000382 (6 Port Manifold) MAl775000383 (7 Port Manifold) MAl875000384 (8 Port Manifold) MAl975000959 (9 Port Manifold) MAI075002185 (10 Port Manifold) MAI175002186 (11 Port Manifold) MAI275002542 (12 Port Manifold) MAI375002543 (13 Port Manifold) MAl475002510 (14 Port Manifold) MAI375004576 (12+1 Port Manifold) MAl475004577 (12+2 Port Manifold) MAI775004574 (6+1 Port Manifold) MAl875004575 (6+2 Port Manifold) MAl475004585 (13+1 Port Manifold) CAI075000031 (Meter carrier) CAI075000040 (Stopcock carrier)

Approval Holder:

Waterfit Ltd

Company Name

Waterfit Ltd

Address

PO Box 28 293 Birmingham New Road Dudley

Postcode

DY1 4SJ

Country

West Midlands

Phone

0121 5207987

General Email

enquiries@waterfit.co.uk

View All Listings by this Company

Isolation valve, stainless-steel braided EPDM lined flexible hose assembly and a non-verifiable double check valve assembly, verified by test (suitable for backflow protection against fluid category 3). For use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Size:

15mm compression

Marking:

Ivanci logo (trademark of Zhejiang Fansheng Fluid Control Co., LTD), WRAS, year of manufacture (MMYY) on hose ferrule. CR, flow arrow and size on double check valve assembly.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

RCC.L-01

Product Images

Approval Holder:

Zhejiang Fansheng Fluid Control Co., LTD

Company Name

Zhejiang Fansheng Fluid Control Co., LTD

Address

Putian Industrial Area Chumen Area Yuhuan City Zhejiang Province

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Fansheng Fluid Control Co., LTD

Company Name

Zhejiang Fansheng Fluid Control Co., LTD

Address

Putian Industrial Area Chumen Area Yuhuan City Zhejiang Province

Country

China

View All Listings by this Company

Range of diffuser domes which are intended to be submerged into water.

Non-metallic materials and components comply with BS6920 at 30°C

Section:

1530 Miscellaneous Fittings

Size:

10mm spigot

Marking:

Ozonia (brand name of Water Technologie & Solutions) and model on body

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

120 KTL & 180 KTL

Approval Holder:

WATER TECHNOLOGIE

Company Name

WATER TECHNOLOGIE

Address

20 AVENUE DIDIER DAURAT BP 64050 31029 TOULOUSE CEDEX 4 - FRANCE

View All Listings by this Company