Directory Search Results

Print List

#250855002

'S71U 'O' rings'. Off white coloured (translucent), compression moulded VMQ 'O' rings. Shore hardness 70. Tested in-radius size between 0.89mm & 2.85mm. For use with water up to 85°C.

Section:
5410 Rubbers
Section Subtitle:
Silicone - components.
WRAS Approval Number:
250855002
Expiry date:
31/08/2030

Print This Approval


#2107593

'TODAY TOOLS PVC SOLVENT CEMENT 125ML SC1' & 'TODAY TOOLS PVC SOLVENT CEMENT 250ML SC2'. Clear, transparent (un-pigmented) solvent cement, (intended to join PVC pipe and fittings). Apply as per manufacturer's instructions 'Rev00 08052025'. Cure for 20 days at 7°C. For use with water up to 65°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5560 Solvent Cements
Expiry date:
31/07/2026

Approval Holder:
Todays Tools Ltd.
Company Name
Todays Tools Ltd.
Address
57 - 63 Winpenny Road, Parkhouse Industrial Estate East, Newcastle Under Lyme, Staffs.
Postcode
ST5 7RH

View All Listings by this Company

Print This Approval


#2107594

'TW Tools PVC Pipe Cement 125ml' & 'TW Tools PVC Pipe Cement 250ml'. Clear, transparent (un-pigmented) solvent cement, (intended to join PVC pipe and fittings). Apply as per manufacturer's instructions 'Rev00 08052025'. Cure for 20 days at 7°C. For use with water up to 65°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5560 Solvent Cements
Expiry date:
31/07/2026

Approval Holder:
TW Engineering Co. Ltd
Company Name
TW Engineering Co. Ltd
Address
Angular House Eagle Road Quarry Hill Industrial Park Ilkeston Derbyshire
Postcode
DE7 4RB
Phone
0115 932 3223

View All Listings by this Company

Print This Approval


#250555028

'BENVIC IR712ES/9738' & 'BENVIC IR745ES/9738'. Grey coloured, compression moulded PVC materials. For use with water up to 23°C.

Section:
5306 Polyvinylchloride (PVC, PVC-U and CPVC)
Section Subtitle:
Material only.
WRAS Approval Number:
250555028
Expiry date:
31/05/2030

Approval Holder:
Benvic IBE SL
Company Name
Benvic IBE SL
Address
Besós, 4-6, 08170 Montornés del Vallés, Barcelona
Country
Spain

View All Listings by this Company

Print This Approval


#250515701

Range of single-hole, multiple outlet, swivel, combination tap assemblies (brass bodies - various finishes, see model) with a pull-out spout. The product is designed to dispense near boiling filtered water or filtered water using a ½ turn ceramic disc headwork, (¼ turn anticlockwise via a spring loaded lever for near boiling water, and ¼ turn clockwise for filtered water). The product also incorporates a ceramic cartridge headwork for hot and cold supplies with a single lever operating member. The pull-out spout incorporates a plastic aerator for the hot and cold water pathway and an integral brass insert for the near boiling/filtered water pathway. Maximum working pressure 8.0 bar. Maximum operating temperatures: 85°C, and 98°C for the near boiling/filtered water pathway (after the boiler).

Section:
0683 Combination Tap Assemblies
Section Subtitle:
Multiple Function tap(s). In addition to normal tap function includes at least one of following functions chilled, filtered, carbonated, instantaneous hot water.
WRAS Approval Number:
250515701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The near boiling water heater and filter must be purchased separately and are not covered under the scope of this approval.
Size:
Cold supply: ½” captive nut to tee connector. Hot supply: Stainless steel braided PEX lined flexible inlet hose assembly incorporating a ½” captive nut end connection.
Marking:
Taizhou New Lanbiao Intelligent Technology Co.,Ltd logo (‘NLB’) on body.
Installation Requirements:
R001 R007 R009 R090
Expiry date:
31/05/2030
Proviso:
The near boiling water heater and filter must be purchased separately and are not covered under the scope of this approval.
Model:
14043** & 14043A** ** represent different finishes No suffix: Chrome plated H: Black, N: Nickel brushed, GJS: Zirconium gold brushed, G: Zirconium gold, QTSL: Brushed bronze bright, QTS: Brushed bronze matte, TJ: Titanium gold, TJLS: Titanium gold brushed, MGJ: Rose gold, MGJL: Rose gold brushed, HGT: Red bronze, HTL: Yellow bronze brushed, HTS: Red bronze brushed, PVDQH: Gun grey, HQ: Gun grey brushed, Q: Bronze, DYB: Matte white, STS: Acid copper brushed, BZ: Spray pearl white, DMGJ: Light rose gold brushed.
Product Images

Approval Holder:
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Company Name
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Address
JIAOXI INDUSTRIAL ZONE, QINGGANG, YUHUAN, TAIZHOU
Country
China

View All Listings by this Company
Manufacturer:
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Company Name
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Address
JIAOXI INDUSTRIAL ZONE, QINGGANG, YUHUAN, TAIZHOU
Country
China

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1443 of 1565

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.